dji CP.RN.00000189.01 Prossd 1TB User Guide
- June 6, 2024
- DJi
Table of Contents
dji CP.RN.00000189.01 PROSSD 1TB User Guide
v1.0 2021.11
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMO’ product. Please read this entire document and all safe and lawful practices DJI OSMO provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI OSMO accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI OSMO.
This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. For up to date product information, visit http://www.dji.com and click on the product page for this product.
This document is available in various languages. In the event of divergence among different versions, the English version shall prevail.
Introduction
When used with the DJI PROSSD Mount, the DJI PROSSD 1TB can be installed on a DJI Ronin 4D to record video in ProRes RAW or 8K resolution.
Usage
Insert the PROSSD card. Make sure the button on the PROSSD Mount pops up and there is a clicking sound. Go to the menu of the high-bright main monitor, tap Recording, then Storage, and select DUI PROSSD.
Press the button on the PROSSD Mount to remove the PROSSD card.
| Status LED | Description |
|---|---|
| Solid white | On standby |
| Blinks white | Reading/writing data |
- To format the PROSSD card, go to the menu of the high-bright main monitor, tap Storage and select Format DJI PROSSD.
- The PROSSD card can only be formatted using DJI Ronin 4D. DO NOT remove the card during formatting.
- DO NOT remove the PROSSD card during recording or while the PROSSD card is initializing or updating.
- After removing the PROSSD card, use the USB-C to USB-C high-speed data cable in the 8K combo to connect the PROSSD card to a computer to export the videos.
Specifications
| Capacity | 1 TB (actual capacity: 935 GB) |
|---|---|
| Dimensions | 96×29.4×10.3 mm |
| Weight | 45.5 g |
| Operating Temperature | -10 to 40° C (14° to 104° F) |
| Storage Temperature | -40° to 85° C (-40° to 185° F) |
Please refer to http://www.dji.com/service for after-sales service for your
product where applicable.
DJI OSMO shall mean SZ DJI OSMO TECHNOLOGY CO., LTD. and/or its affiliated
companies where applicable.
Compliance Information
FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: DJI PROSSD 1TB
Model Number: PS1024M2
Responsible Party: DUI Technology, Inc.
Responsible Party Address: 201 S. Victory Bivd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISED Compliance
CAN ICES-003 (BVNMB-003/B)
EU Compliance Statement: SZ DUI Osmo Technology Co.., Ltd. hereby
declares that this device (DJI PROSSD 1TB) is in compliance with the essential
requirements and other relevant provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dj.com
/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
GB Compliance Statement: SZ DUI Osmo Technology Co., Ltd. hereby declares
that this device (DJI PROSSD 1TB) is in compliance with the essential
requirements and other relevant provisions of Electromagnetic Compatibility
Regulations 2016.
A copy of the GB Declaration of Conformity is available online at www.dji.com
/euro-compliance
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
DJI is a trademark of DJI OSMO and its affiliated companies.
Copyright © 2021 DJI OSMO All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>