robosen Optimus Prime G1 Flagship Edition Robot Transformers User Manual

robosen Optimus Prime G1 Flagship Edition Robot Transformers

PRODUCT SPECIFICATION

Robot Diagram

• POWER ON

  •  Take out the robot carefully from the box and place it on a flat surface;
  •  Press and hold the power button until the robot says “Greetings.I am Optimus Prime.”

• INSTALL MOBILE APP

  • Search For “robosen Optimus Prime” in the App Store (for Apple devices) or Google Play(for Android devices!, ther download and install the application.

• CONTROL VIA APP

  • Ensure your mobile device’s Bluetooth is On.

  • Turn on the robot.

  • Open the device app, then tap the Connection icon located on the Main Page.
    An icon with your robot’s unique serial number will appear, Example: “OP-0000”. Tap on “OP-0000” icon.

  • Have fun controlling the robot via the app.

• POWER OFF

  • Press and hold the power button until the robot says, “Autobots never give up”.
  • If connected via the App, tap the connection icon located on the top-right corner of the Main Page, Tap the “Shutdown ” icon.

• CONTROL VIA VOICE
  Turn on the robot.

  • Say “Hey, Optimus Prime” to enter Voice Control mode, The robot will respond “Greet­ings.”
  • See the Voice Command Card for more preset voice commands;
    (NOTE: Voice control functions cannot be used while the robot is connected with the device app. Disconnect from the robot app to use voice control.)

• CHARGING

  • Connect one end of power supply adapter to the robot, Connect the other end of the power adapter to a power outlet.
  • The indicator light of the power adapter changes from red to green when the robot is fully charged.

FEATURES & FUNCTIONS

• STANDING UP AUTOMATICALLY
  • Sensors and an internal gyroscope detects the robot’s position and will automatically rotate the robot into an upright position if tilted.
  • The automatic standing feature can be enabled or disabled on the top-right corner of the Bluetooth Control page.
• VOICE CONTROL
  • Check Voice Command Card via the app.
  •  Use voice customize to make the robot perform a series of motions.
• ACTION STUNTS
  • The robot can perform thousands ofTFGl actions.

CLASSIC MOVEMENTS

• Classic Movement Mode – Customize:
  Basic action design mode that anyone can easily get started with, The device’s movements can be edited by hand, recorded and combined into a series of actions.

• Classic Movement Mode – Block Based:
  Block-based visual programming is one of the most popular programming modes in the world .User can create and modify the robot’s actions via the graphical user interface to create a multitude of customized actions.

• Classic Movement Mode – 3D Action:
  Robosen researched and developed a new type of programming model, which can easily adjust each joint of the robot in real-time.

•  Voice customize Mode:
  Intelligent voice customize is an innovative customize mode allowing the robot to execute desired movements by inputting the user’s simple voice commands.

SPECIAL FUNCTION INSTRUCTION

VOICE CUSTOMIZE (NOT BLU ETOOTH CONNECTED}

• Say “Hey Optimus Prime” to device. Wait for the device to respond “Greetings”, say “customize”, within 10 seconds, then enter Voice customize Mode after the robot responds with”Energon linked connect­ed.”
• In the Voice customize Mode, say a voice command phrase to the robot, such as “Say hello”, “come back”, “‘turn left”.” After saying the voice command, wait for the success prompt sound effect to indicate that the command phrase has been input successfully, and then continue to say the next command phrase to be executed.
• Say “cancel” to the robot if you need to exit Voice customize Mode.
• After inputting a set of voice customize words, you can say “Start Actions” to initiate these commands, and the device will execute, in sequence, the motions you have programmed.
  Note:
  The device will automatically exit Voice Programming Mode if no commands are heard after 10 seconds. Voice command inputs have failed if you don’t hear the sound effect after each command entry.
  If voice commands aren’t being recognized, please log into the app and review the section on setting voice commands.

SHARE CUSTOMIZED ACTIONS

• Enter into Robosen hub, and select one programming method for action design;
• After the action design is finished, you can then click the “Shooting” button on the program­ ming interface and enter into the robot’s shooting function. You can also click “Play” button during the shooting process to make the robot carry out your just finished programming commands.
• Enjoy sharing your action design accomplishments with Robosen Hub to the world.

TROUBLESHOOTING

Q: WHY IS THE ROBOT MALFUNCTIONING ?

1. Turn off and restart the robot ;
2. Ensure the robot is fully charged ;
3. Check the website for video tutorials on troubleshooting issues;
4. Contact customer service for additional help.

Q: WHY IS THE ROBOT UNRESPONSIVE WHEN I USE VOICE COMMAND ?

1. Check the Bluetooth connection;
2. Ensure the robot is disconnected from the App;
3. Use the preset Voice Commands to control your robot;.
4. Ensure you are in a quiet setting with minimal background noise.

Q: WHY CAN’T RO BOSEN OPTIMUS PRIME KEEP ITS BALANCE WHEN IT IS WALKING OR DOING OTHER ACTIONS ?
Ensure the robot is on a smooth flat surface. robosen Optimus Prime will not function properly on an uneven or bumpy surface.

Q: THE ROBOT DOES NOT POWER ON?

1. Ensure the Robot is fully charged. Charge the Robot fully and power on ;
2. Press and hold the power button until the robot says “Greetings. I am Optimus Prime.”

Q: APP CANNOT CONNECT TO THE ROBOT?

1. Ensure the robot is fully charged and turned on ;
2. Ensure Bluetooth is enabled on your smart phone/@blet;
3. Ensure your device permissions are enabled for the robot on your device;
4. Ensure only one device is connected to the robot. Disconnect the robot from any other smart phone/@blet you are not using.

Q: THE ROBOT STILL SHOWS LOW BATTERY AFTER CHARGING FOR ALONG TIME?
Ensure both ends of the charging cable are properly plugged in.

WARNINGS

Watch your FINGERS!

• Do NOT touch the product while it is transforming or moving.
• Do NOT forcibly remove or lift the head of the product.

Watch your FINGERS!

• Do NOT Open, Crush, or expose the product to heat above 35°C.
• Do NOT Incinerate the Battery.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

DISCLAIMER

Product and Limited Warranty Information Guide
This guide contains safety, handling, disposal, recycling, and regulatory information as well as the limited warranty for the machine. read all safety information and operating instructions before using the machine to avoid harm or injury. visit www.robosen.com for a downloadable version.

IMPORTANT SAFETY AND HANDLING INFORMATION
Read the following warning before you or your child play with the machine. Failing to do so may cause injury

CAUTION:

• To reduce the risk of damage or injury, do not attempt to remove the machine’s shell;
• Please refer all non-routine servicing questions to Robosen Robotics Inc.
• No user-serviceable parts are contained inside
  CALIFORNIA PROPOSITION 65
  WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

General:

• Read all safety and operating instructions before operating machine.
• Retain the safety and operating instructions for future reference.
• Follow all operating and use instructions.
• Do not attempt to service machine yourself.
  Refer all non-routine servicing to Robosen.

Seizure, Blackouts and Eyestrain
A small percentage of people may be susceptible to blackouts or seizures (even if they have never had one before) when exposed to flashing lights or light patterns such as when playing games or watching video. If you have experienced seizures or blackouts or have a family history of such occurrences, you should consult a physician before playing video games or watching videos. Discontinue use of machine and your smart device controller and consult a physician if you experience headaches, blackouts, seizures, convulsion, eye or muscle twitching, loss of awareness, involuntary movement, or disorientation. To reduce risk of headaches, blackouts, seizures, and eyestrain, avoid prolonged use, hold your smart device controller some distance from your eyes, use machine in a well-lit room, and take frequent breaks.

Keeping Machine Within Acceptable Temperatures
Operate and store machine in a place where the temperature is between 0° and 35° C (32° to 95° F). Low or high-temperature conditions might temporarily shorten battery life or cause machine to temporarily stop working properly. Avoid dramatic changes in temperature or humidity when using machine, as condensation may form on or within machine. Don’t leave machine in your car, because temperatures in parked cars can exceed this range. When you’re using machine or charging the battery, it is normal for machine to get warm.

Maintenance and Use

Never:

• Abuse, throw, drop, puncture, violently kick or step on machine. Forcibly move the product or its parts. This can damage the robot and compromise its safe operation.
• Operate machine on elevated surfaces (shelves, desks) where it can drop or fall. This can damage the robot and compromise its safe operation.
• Operate machine in dangerous, hazardous or public areas where use is not permitted (high voltage power lines, train stations, airports, trains). Check whether use of machine is permitted before using it in public areas or public transport.
• Exceed one hour of continuous use. This can cause premature degradation of the product’s lifespan.

Always:

• Keep machine in sight at all times when operating it to avoid injuries or damage to people, animals or property.
• Ensure that no one is standing nearer than 1 yard (1 meter) from machine when in operation and that you keep a safe distance between the product and people, animals and property.
• Use the machine on smooth and flat surfaces.
• Periodically examine machine for potential hazards such as cracked, damaged or otherwise broken parts. In the event of such damage, do not use machine until it can be replaced or repaired.

Battery Warning:

• Lithium ion cells and batteries are extremely hazardous and liable to cause serious injuries to persons or property. The user accepts liability for the use of a Lithium Polymer battery. As the manufacturer and the distributor cannot ensure the battery is used correctly (charging, discharging, storage, etc.), they cannot be held liable for damages caused to persons or property.
• In the event of battery leakage, avoid the liquid coming into contact with skin and eyes. In case of contact with the skin, wash copiously with soap and water. In case of contact with the eyes, rinse copiously with cold water and consult a doctor. If you notice a suspicious smell or noise or observe smoke around the charger, disconnect it immediately.
• Non-compliance with the instructions below could result in gas being given off, fire, electric shock or an explosion.

Charging:

• Examine the charger regularly for damage to the cord, plug, enclosure or other parts. The toy shall only be used with a transformer for toys. Never use a damaged charger or power adapter or third party charging accessories. Use only the supplied charging accessories provided. If misused, the charging system can cause electrical shock.
• Never charge a leaky battery or one that has been damaged. Do not use the supplied charger/rabies to charge any other device.
• Do not charge the battery near flammable materials or on a flammable surface (carpet, wooden flooring. wooden furniture, etc.) or conducting surface. Do not leave machine unattended during charging.
• Never charge the device immediately after use while it is still hot. Let it cool down to room temperature
• Batteries are only to be charged under adult supervision.
• Do not cover your product or its charger while the battery is charging. Recharge the battery at a temperature of between 0° and 35° C (32° to 95° F). The AC/DC adaptor is not a toy and should only be operated by adults.

Use and storage:

• Do not use machine if its cover has been broken and the battery’s plastic cover has been cracked or compromised in anyway.
• Do not expose the battery to excessive physical shock.
• Do not expose machine and its battery to heat or dispose of a fire.
• Do not put the battery in a microwave oven orin a pressurized container.
• Do notattemptto dismantle, pierce,distortorcut the battery and do not attempt to repair the battery. Do not placeanyhea Vfobjects on machine, the battery or charger.
• Do not clean the charger with a solvent, denatured alcohol or other flammable solvents. When cleaning, be sure to unplug tadapter and charger.
• It is essential to avoid short circuits. Avoid direct contact with the electrolyte contained within the battery. The electrolyte and electrolysis vapors are harmful to health.
• Do not subject machine and its battery to large temperature variations. Do not place your machine near a source of heat.
• Disconnect the charger when you are not charging the battery.

Battery Disposal:
Machine and its batteries put into your general household waste can be harmful to the environment. Damaged or unusable batteries must be disposed of in a container specially reserved for this purpose. When disposing of the battery, follow appropriate local guidelines and regulations. For further information contact your local solid waste authority.

Warranty
Limited Warranty to Original Purchaser:

• This machine product, as supplied and distributed by Robosen Robotics Inc., and delivered new, in the original carton to the original customer purchaser, is warranteed by Robosen Robotics Inc. against manufacturing defects in materials and workman­ship for a period of 1 year.
• Robosen will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective during the limited warranty period specified above.

Product Registration

Register your product at robosen.com.

If a defect arises:

• Please contact us at supportusa@robosen.com to be provided with a Return Material Authorization Request (RMA) number.
• Provide this number with your package when shipping. We do not accept returns without the RMA number. Purchaser is responsible for all shipping costs.

Software License:
Use of machine is subject to the machine Software License Agreement.

Exclusions and Limitations:
This warranty covers the normal and intended use of machine. It applies only to the hardware product “machine”manufactured by Robosen Robotics Inc. The Limited Warranty does not apply to any non-Robosen hardware product or any software, even if packaged or sold with the machine hardware product Refer to the software license agreement accompanying the software for details of your rights with respect to its use. Robosen does notwarrantthat the operation of machine will be uninterrupted or error-free. Robosen is not responsible for damage arising from failure to follow instructions relating to machine’s use.
This warranty does not apply to:

• Consumable parts, such as batteries, or protective coatings designed to diminish overtime unless failure has occurred due to a defect in materials or workmanship;
• Damage caused by use with non-machine products;
• Damage caused by accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper inst.allation; product alteration or modification; improper or unautho­rized repair; exterior finish or cosmetic damage;
• Damage caused by operating machine outside the intended uses described by Robosen;
• Defects caused by normal wear and tear or otherwise due to the normal aging of the machine product.
• THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIOD STAT ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON ROBOSEN. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY
• LAW, ROBOSEN IS NOT RESPONSIBLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, LOSS OF OPPORTUNITY, LOSS OF GOODWILL, LOSS OF REPUTATION, LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT,OR
• ANY BREACH OF ANY WARRANTY OR CONDITION REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF ROBOSEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST ROBOSEN BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF MACHINE. WITHOUT LIMITING THE FOREGOING, PURCHASERASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY ROBOSEN NOT CAUSED DIRECTLY BY THE GROSS NEGLIGENCE OF ROBOSEN. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
• Some states do ootallow limit.ations on how long an implied warranty lasts, or the exclusion or limitation of incident.al or consequential damages, so the above limitationsor exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

Governing Law and Arbitration:
This Limited Warranty shall be governed by the laws of the State of California without giving effect to any conflict of laws principles that may provide the application of the law of aoother jurisdiction.Any claim or dispute in connection with this Limited Warranty shall be resolved in a cost effective manner through binding non-appearance-based arbitration. The arbitration shall be initiated through an established alternative dispute resolution provider mutually agreed upon by the parties. The alternative dispute resolution provider and the parties must comply with the following rules:

• The arbitration shall be conducted by telephone, online and/or be solely based on written submissions, the specific manner shall be chosen by the party initiating the arbitration;
• The arbitration shall not involve any personal appearance by the parties or witnesses unless otherwise mutually agreed by the parties; and
• Any judgment on the award rendered by the arbitrator may be entered in any court of competent jurisdiction.
  If the foregoing arbitration clause does not apply for any reason, you agree to submit to the personal jurisdiction of the state courts located within LJ\.County, California and the federal courts in Los Angeles, California for the purpose of litigating all such claims or disputes, which courts shall have exclusive jurisdiction of such claims or disputes. Notwithstanding the foregoing, Robosen may seek injunctive or other equitable relief to protect its intellectual property rights in any court of competent jurisdiction

Changes to this Product Information Guide:
The explanations and specifications in this guide are given for information only and may be modified at any time without prior notice. The latest version of this guide will be available from our website at www.robosen.com. The explanations and specifications contained in this guide are correct at the time of printing. Robosen reserves the right to amend or improve the product design or user guide without any restrictions and without any obligation to notify users. As part of our ongoing effort to upgrade and improve our products, the product that you have purchased may therefore differ slightly from the model described in this guide.

End of Life Product Disposal:
At the end of this product’s life, please do not dispose of this product in your general household waste. Instead, in order to prevent possible harm to the environment or human health from uncontrolled waste disposal, please dispose of this product separately in accordance with your local laws and regulation. For more information on the separate collection systems for waste electrical and electronic equipment that are available for consumers, near your home, free of charge, please contact your local municipality authority.

You can also contact the retailer from which you purchased your machine they might have put in place recycling services or he may­be part of a specific recycling program. This product will be then treated in an environment.ally sound manner at a licensed recycling plant and its components will be recovered, recycled or reused in the most efficient manner, in compliance with the requirements of the Directive on Waste Electrical and Electronic Equipment (2002/96/EC) of27 January2003 (as subsequently amended or replaced).

IMPORTANT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>