robosen Grimlock G1 Flagship Robot Instructions

: June 9, 2024
: robosen

Table of Contents

Power key
Download APP
- Starting a Conversation
- Product Specifications
FCC WARNING
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

robosen Grimlock G1 Flagship Robot

robosen Grimlock G1 Flagship Robot

Power key

Turn it on/off

Press and hold the power button until the robot’s eyes light up and the robot says “Me, Grimlock, stronger! Me, Grimlock must lead!” To complete the boot.

Return to initial stance

Click the power button to restore the robot to the initial state of the current form. If the audio is currently playing, it will stop playing.

Charge

Plug the adapter into the robot and turn on the power. When the light shows a continuous red light, the robot is being charged. When the light shows a continuous green light, charging is complete.

Download APP

Mobile app store search [Lesen Cable Performance version] app download.

Starting a Conversation

Say “Hey, Grimlock” to the robot, wake up the robot, when the robot replies “Yes we go”, you can give Grimlock “fight”, “coronation”, “fire breathing”, “save Cybertan” and other commands, appreciate the movement shock brought by the robot.

Product Specifications

Product name: Robosen Grimlock G1 Flagship Robot
Product Size: Human size: 218.5 (L) 348.2 (W) 381 (H) (Unit: mm)
Dragon size: 335.4 (L) 230.9 (W) 390.2 (H) (Unit: mm)
Product weight: about 2.57KG
Product material: ABS, PC, PA66+ 30% GF, aluminum alloy, etc
Number of steering gear: 34
Battery information: 2500mAh 11.1V
Communication mode: Bluetooth BLE5.0
Control mode: mobile App or voice control
Peripheral interface: Type-C interface

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.