SILVERCREST SMZ 260 K5 Mini Chopper Blender Instruction Manual

http://www.lidl-service.com

**MINI CHOPPER
HACHOIR MULTIFONCTION SMZ 260 K5
Operating instructions
IAN 352700_2010

**

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Read these operating instructions carefully before using the appliance for the first time and retain them for future reference. Please pass these operating instructions on to any future owner(s).

SMZ 260 K5

Introduction

Congratulations on the purchase of your new appliance! You have chosen a modern, high-quality product. These operating instructions are part of the product. They contain important information about safety, usage, and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. This appliance may only be used as described and for the purposes indicated. Please also pass these operating instructions on to any future owner.

Intended use

This appliance is intended for the chopping of boneless foods in small amounts or for whipping cream. This appliance is intended exclusively for use in domestic households.
All other uses are deemed to be improper and may result in property damage or even personal injury. No liability will be accepted for damages that result from improper use of the appliance.
This appliance is not intended for use in companies or for other commercial uses.

Package contents

The appliance is supplied with the following components as standard:

• Mini Chopper
• Blade holder with blade
• Whisk attachment
• Stand
• Operating instructions

Unpacking

1. Remove all parts of the appliance and the operating instructions from the box.
2. Remove all packaging materials from the appliance.

NOTE

• Check the package for completeness and for signs of visible damage.
• If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the Service hotline (see section Service).

Disposal of the packaging

The packaging protects the appliance from damage during transport. The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
NOTE

• If possible, keep the original packaging of the appliance for the entire duration of the warranty period so that the appliance can be packed properly for return shipment in the event of a warranty claim.

Appliance description

Figure A:

1. Turbo button
2. Motor unit
3. Lid flange
4. Lid
5. Blade holder
6. Bowl
7. Blade
8. Bearing
9. Stand
10. Whisk attachment

Technical details

Max. filling quantity

| Food products up to the 300 ml marking
Liquids up to the 200 ml marking

| All parts of this appliance which come into contact with food are food-safe.

CO TIME

The CO time (continuous operation time) is the amount of time an appliance can be operated without the motor overheating and becoming damaged.  After the appliance has been operated for this duration of time, switch it off until the motor has cooled down.

Safety information

WARNING! RISK OF ELECTRIC SHOCK!

• Connect the appliance only to a correctly installed power socket supplying a mains power voltage of 220 – 240 V ∼, at 50 Hz.
• To prevent accidents, have defective plugs and/or power cables replaced immediately by an authorized specialist, or our Customer Service or a similarly qualified person.
• In event of operating malfunctions and before cleaning the appliance, remove the power plug from the mains power socket.
• Always remove the power cable from the socket by pulling on the plug, not on the power cable itself.
• Do not kink or crush the power cable, and route the cable so that it cannot be stepped on or tripped over.
• Do not expose the appliance to humidity and do not use it outdoors. If any liquid gets into the housing, disconnect the appliance from the mains power socket immediately and have it repaired by a qualified technician.
• Never hold the appliance, power cable, or power plug with wet hands.
• If the power cable or the motor unit are damaged, you must have the appliance repaired by qualified technicians before using it again. Do not attempt to open the motor unit housing. This can lead to risks and also invalidates the warranty.
• Disconnect the appliance from the main power source immediately after use. The appliance is completely free of electrical power only when unplugged.
  Never immerse the motor unit in liquid and do not allow any liquids to enter the motor unit casing.

WARNING! RISK OF INJURY!

• Before changing any accessories or additional parts which move during operation, the appliance must be switched off and disconnected from mains power.

• Never use the appliance for purposes other than those described in these instructions.

•  Take care when emptying the bowl! The blade is extremely sharp!

• Take care when cleaning the appliance! The blade is extremely sharp!

• The appliance must always be disconnected from the mains when left unsupervised and before assembly, disassembly, or cleaning.

• This appliance may not be used by children.

• The appliance and its connecting cable must be kept away from children.

• This appliance may be used by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge provided that they are under supervision or
  have been told how to use the appliance safely and are aware of the potential risks.

• Do not allow children to use the appliance as a plaything.

• Children should be supervised to ensure that they do not play with the appliance.

• Handle the extremely sharp blade with caution as it can cause injuries. Reassemble the appliance after using and/or cleaning it so that you do not injure yourself with the exposed blade. Keep the blade out of the reach of children.

• Never attempt to remove foodstuffs from the bowl for as long as the blade is still rotating. Risk of injury!

• Wait until the blade has stopped rotating before removing the motor unit.

• Never try to grasp the blade if it is still rotating!
  Risk of injury!

WARNING! RISK OF FIRE!

• Do not allow the appliance to run for more than 1 minute.
  Afterwards, allow it to cool down.

CAUTION! APPLIANCE DAMAGE!

• See the table on the recommended fill quantities in the section “Chopping”. Otherwise, there is a risk of contamination due to leaking contents.
• Do not clean the motor unit in the dishwasher, as this will damage it.
• Never fill the appliance with hot liquids! Otherwise, the appliance could be damaged!

Operation

Chopping

NOTE

• Before first use, you must clean the appliance thoroughly as described in the section on cleaning.

1. Place the bowl 6 on the stand 9.
2. Insert the blade holder 5 with the blade 7 onto the bearing 8.
3. Prepare the food by chopping larger pieces into pieces (approx. 2 cm) which will fit better into the bowl 6.
4. Add the food to the bowl 6. Please note the following table: For optimum results, we recommend the following maximum filling quantities:

Food

| Max. filling quantity|

Processing time

|

Speed

---|---|---|---
Onions| 100 g| pulse| turbo
Garlic| 150 g| pulse| turbo
Tomatoes| 200 g| 10 sec.| normal
Hazelnuts| 200 g| 3 x 8 sec.| turbo
Food| Max. filling quantity| Processing time| Speed
---|---|---|---

Almonds

|

200 g

| coarse: 1 x 15 sec.
medium: 2 x 15 sec.
fine: 3 x 15 sec.|

turbo

Cheese (Gouda, young, fridge temperature)|

150 g

|

2 x 15 sec.

|

turbo

Eggs (hard-boiled)| 3 (150 g)| 2 x 4 sec.| turbo
Meat| 200 g| 4 x 12 sec.| turbo
Ice cubes| 100 g| 15 x 1 sec. pulse| turbo

5. Close bowl 6 with the lid 4: Place it onto bowl 6 so that the lugs on the lid 4 grip into the guides on the bowl 6. Turn the lid 4 so that the lugs slide into the guides below.
6. Place the motor unit 2 on the lid flange 3.
7. Press the motor unit 2 downwards as shown in fig. B. The motor starts at normal speed.

• For a higher processing speed (Turbo) for the food, press on both the motor unit 2 and the Turbo button 1 and keep both pressed down as shown in Fig. C.

NOTES

• If larger pieces start collecting on the wall of the bowl during processing, lift the motor unit 2 off the lid flange 3. Give the bowl 6 a firm shake and restart the processing. Any residues can be removed with a spatula.
• Particularly hard foods should be cut into small pieces (approx. 2 cm) before processing. Otherwise, the motor unit could block. Use a pulsing processing method when working with hard foods. To do this, press the Turbo button 1 several times briefly (in addition to the motor unit 2). If the food is not completely chopped, you can either cut it into smaller pieces or lift the motor unit 2 off of the lid flange 3. Give the bowl 6 a firm shake and restart the processing.

8. If the food is fully chopped, let go of the motor unit 2 and, if applicable, the Turbo button 1.
9. Remove the power plug from the socket.

WARNING! RISK OF INJURY!

• Never attempt to remove food from the bowl 6 while blade 7 is still turning. There is a risk of injury and food can also spray out and make a mess.

10. Wait until the blade 7 has come to a complete standstill.
11. Lift the motor unit 2 off the lid flange 3.
12. Remove the lid 4.

• Handle the extremely sharp blade 7 with caution as it can cause injuries.
  Keep the blade 7 out of the reach of children.

13. Pull the blade holder 5 with the blade7 carefully out of the bowl 6.
14. Remove the food.

NOTES

• Chopping harder, abrasive foods can cause the bowl 6 to take on a dull appearance. This is normal and will not impair the functioning of the appliance.
• After you have finished processing the food, you can use stand 9 as a lid for the bowl 6 to keep the food fresh for longer.
  – Take the motor unit 2 and the lid4 off the bowl 6.
  – The blade holder 5 with blade 7 can, if so desired, remain in the bowl 6.
  – Remove the stand 9 from the underside of the bowl 6. Turn the stand 9. You can now place a stand 9 on bowl 6 so that it closes off the bowl 6.

Whipping cream

You can also use the appliance to whip cream with the help of the whisk attachment 10:

1. Place the bowl 6 on stand 9.
2. Push the whisk attachment 10 onto the blade holder 5:
   – For 100 ml of cream, place it onto the blade holder 5 so that the whisk attachment 10 is in contact with both blades 7 and clicks into place (fig. 1):

– For 200 ml of cream, turn the whisk attachment 10 horizontally by 180° (fig. 2), so that it is in contact with only one blade 7 and clicks into place (fig. 3). It then churns higher through the cream.

3. Attach the blade holder 5 together with the whisk attachment 10 to the bearing 8.
4. Add the cream.
5. Close bowl6 with lid 4: Place it onto bowl 6 so that the lugs on the lid 4 grips into the guides on a bowl 6. Turn the lid 4 so that the lugs slide into the guides below.
6. Place the motor unit 2 on the lid flange 3.
7. Press the motor unit 2 downwards as shown in fig. B. The motor starts at normal speed.

NOTE

• To whip cream, you should make sure that it is well chilled before whipping (max. 8°C/fridge temperature).
• For 100 ml of cream, we recommend a whipping time of around 30 seconds at normal speed.
• For 200 ml of cream, we recommend a whipping time of around 30 – 50 seconds at normal speed.
• Depending on certain factors, such as fat content or the ambient temperature, the whipping time can vary. Keep an eye on the cream while you are whipping it and adjust the whipping time to fit your needs.

Cleaning and care

WARNING! RISK OF ELECTRIC SHOCK

• Always remove the plug from the mains power socket before cleaning the appliance.
  You must never immerse the appliance in water when cleaning it or hold it under running water.

WARNING! RISK OF INJURY!

• Handle the extremely sharp blade 7 with caution as it can cause injuries. Reassemble the appliance after using and/or cleaning it so that you do not injure yourself with the exposed blade 7. Keep the blade 7 out of the reach of children.

CAUTION! PROPERTY DAMAGE!

• Do not clean motor unit 2 in the dishwasher, as this will damage it.
• Remove the power plug from the socket.
• Clean the motor block 2 and the blade holder 5 and blade 7 with a well-wrung-out sponge.
• Clean the bowl 6, the whisk attachment 10, the lid 4, and the stand 9 in warm water with a little mild detergent. Rinse all the parts afterward using fresh water and dry them with a tea towel.
  Alternatively, you can clean all of the parts apart from the motor unit 2 in the dishwasher. If possible, place the parts in the top basket of the dishwasher. Ensure that the parts are not trapped in any way.

Troubleshooting

necessary.
The appliance is possibly defective.| Contact the Customer Service department.

If the malfunction cannot be corrected using one of the suggestions above, or if you have found some other kind of malfunction, please contact our Customer Service department.

Appendix

Disposal of the appliance
Never dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal waste facility. Please comply with all applicable regulations. Please contact your waste disposal center if you are in any doubt.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility, and is collected separately.

Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or too fragile parts which could be considered as consumable parts such as switches, batteries, or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used, or improperly maintained. The directions in the operating instructions for the product regarding the proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force, and modifications / repairs which have not been carried out by one of our authorized service centers.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.
• You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left), or on the sticker on the rear or bottom of the product.
• If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos, and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page (www.lidl- service.com) where you can open your operating instructions by entering the item number (IAN) 352700_2010.

http://www.lidl-service.com

Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 352700_2010

Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Last Information Update · Stand der Informationen · Version des informations · Stand van de informatie
02 / 2021 · Ident.-No.: SMZ260K5-112020-2
IAN 352700_2010

Documents / Resources

| SILVERCREST SMZ 260 K5 Mini Chopper Blender [pdf] Instruction Manual
SMZ 260 K5, Mini Chopper Blender
---|---
| SILVERCREST SMZ 260 K5 Mini Chopper [pdf] Instruction Manual
SMZ 260 K5 Mini Chopper, SMZ 260 K5, Mini Chopper

References

• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>