Yealink BTH58 Bluetooth Handset User Guide

v1.0
BTH58 Bluetooth Handset Quick Start Guide
Erste Schritte

copyngraceo2o YEALIMO XIAMEN) NETWORK technology..LTOW1 opts ICCAPICCI.

Features

Caracteristicas

Charge the Handset

Pair & Connect with Your IP Phone

1. Place the handset on the phone handset cradle.
2. Follow the on-screen prompts to connect BTH58 to your phone.

Regulatory Notices Operating Ambient Temperatures

• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty
Our product warranty is limited only to the unit itself when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with the Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Explanation of the symbols

• DC symbol is the DC voltage symbol.
• WEEE Warning symbol

To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end-users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting supportOyealink.com. Safety Instructions Save these instructions. Read these safety instructions before use!
**General Requirements**

• Before you install and use the device read the safety instructions carefully and observe the situation during operation.
• During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid collision and crash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair
• Please refer to the relevant laws and statutes while using the device. The legal rights of others should be respected as well.

Environmental Requirements

• Place the device at a well-ventilated place. Do not expose the device to direct sunlight.
• Keep the device dry and free of specks of dust.
• Do not place the device on or near any inflammable or fire-vulnerable object, such as

Contact Information

YEALINK NETWORK TECHNOLOGY CO..LTD.
309. 3rd Floor. No.16. Yun Ding North Road. Huh, District. Xiamen City. Fujian,
P.R.0 YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127. Atrium Building. 8th floor. 1077ZX Amsterdam.
The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO.. LTD.
999 Peachtree Street Suite 2300. Fulton. Atlanta. GA. 30309. The USA
Made in China
2. Connect it to another wall outlet The usage environment is out of operating temperature range.
1. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly. You cannot connect the cable properly.
1. You may have connected the wrong Yealink device.
2. Use the correct power supply. Some dust, etc., maybe in the port.
1. Clean the port. Contact your dealer or authorized service facility for any further questions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statemen

t 1.This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B) disconnect the grounding cable until you disconnect all other cables.

Battery Requirements

• Do not immerse the battery into water, which could short-circuit and damage the battery.
• Do not expose the battery to an open flame or leave the battery where it could be subjected to extremely high temperatures, which could cause the battery to explode.
• Do power the handset off before removing the battery.
• Do not try to use the battery for the power supply of any device other than this handset.
• Do not open or mutilate the battery, released electrolyte is corrosive and may cause damage to your eyes or skin.
• Use only the rechargeable battery pack delivered with the handset or those rechargeable battery packs expressly recommended by Yealink.
• Defective or exhausted batteries should never be disposed of as municipal waste. Return old battery to the battery supplier, a licensed battery dealer or a designated collection facility.

**** Cleaning Requirements

• Before cleaning the device, disconnect it from the power supply.
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry. Troubleshooting The unit cannot supply power to the Yealink device. There is a bad connection with the plug. 1. Clean the plug with a dry cloth. rubber-made materials.
• Keep the device away from any heat source or bare fire, such as a candle or an electric heater.

****  Operating Requirements

• Do not let a child operate the device without guidance.
• Do not let a child play with the device or any accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only.
• The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for example. near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool
• During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the ratio frequency cable) to avoid lightning strikes.
• If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
• When there is the smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. • Contact the specified maintenance center for repair.
• Do not insert any object into equipment slots that do not pan of the product or auxiliary product.
• Before connecting a cable, connect the grounding cable of the device first. Do not

FCC Part 68 Warning:
FCC Part 68 Warning: a label that contains, among other information, a product identifier in the format US: AAAECIOTXXXX. If requested, this number must be Proved to the telephone Company.

1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is provided to the telephone company.
2. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
3. If this equipment [US: T2LIPNANBTH58 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
4. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
5. If trouble is experienced with this equipment [US: T2LIPNANBTH58], for repair or warranty information, Service can be facilitated through our office at: U.S. Agent Company name: 888VoIP / American Technologies, LLC Address: 611 Jamison Rd Suite 1059 Elma NY 14059 USA Tel: 716-714-8002 If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
6. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of the device except specified. For repair procedures, follow the instructions outlined under the limited warranty.
7. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
8. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this [US: T2LIPNANBTH58] does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
9. If the telephone company requests information on what equipment is connected to their lines, inform them of: a)The ringer equivalence number [NAN] b)The USOC jack required [N/A] c)Facility Interface Codes (“FIC”) [N/A] d)Service Order Codes (“SOC”) [N/A] e)The FCC Registration Number [US: T2LIPNANBTH58]
10. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by tfitt are the REN without a decimal point. For this product the FCC Registration number is [US: T2LIPNANBTH58] indicates the REN would be NAN.
11. We suggest the customers use a surge arrestor to protect the device. FCC Statement This equipment has been tested and found to comply with the limits for a Class B d igital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful, interference to radio communications. However, there is no.guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity
We, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.0 Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.0 CE DATE: 20′ /July/2021 declare that the product Type: Bluetooth Handset Model: BTH58 meets the essential requirements and other relevant provisions according to the following EC directive Directive: RED 2014/53/EU
Conformity The product complies with the following standards: Safety: EN 62368-1:2014 EMC: EN 55032:2015+AC:2016, EN 55035:2017,
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD WWW.YEALINK.COM
ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0, Radio:ETSI EN 300 328 V2.1.1; Health :EN 62479:2010;
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June 2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS 2.0) Directive 2012/19/EU of the European Parliament and of the Council of 4. July.2012 on Waste electrical and electronic equipment(WEEE) Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18.December.2006 on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>