reolink Argus 2 Outdoor Wireless Home Security Camera Instruction Manual

: June 6, 2024
: reolink

Table of Contents

Argus 2 Outdoor Wireless Home Security Camera
What’s in the Box
Camera Introduction
Install Rechargeable Battery
Set up the Camera
Charge the Battery
Installation Guides
Notes on PIR Motion Sensor
Important Notes on Reducing False Alarms
Notes on Rechargeable Battery Usage
Troubleshooting
Speciﬁcations
Notiﬁcation of Compliance
Correct Disposal of this product
Limited warranty
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Argus 2 Outdoor Wireless Home Security Camera

Instruction Manual

What’s in the Box

The camera and the rechargeable battery are packed separately in the same package.
Please use the skin for better weatherproof performance when you install the camera outdoors.

NOTE: Camera and accessories vary with different camera models that you purchase.

Camera Introduction

Install Rechargeable Battery

Set up the Camera

Download and Launch the Reolink App or Client software, and follow the onscreen instructions to ﬁnish initial setup.

On Smartphone

Scan to download the Reolink App.

On PC

Download path of the Reolink Client: go to https://reolink.com > Support > App & Client.

Charge the Battery

NOTE: The solar panel is NOT included in the package, you can buy it on Reolink official online stores.

Installation Guides

Use the camera skin for better weatherproof performance when you install the camera outdoors.
Install the camera 2-3 meters (7-10 ft) above ground. The detection range of the motion sensor would be maximized at such a height.
For effective motion detection, please install the camera angularly.

NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.

Mount the Camera into a Wall

Mount the Camera into a Wall

Attach the Camera to a Tree

Attach the Camera to a Tree

Magnet (for Argus 2 only)

$Magnet $for Argus 2 only$$

Notes on PIR Motion Sensor

PIR Sensor Detection Range
The PIR detection range can be customized to meet your speciﬁc needs. You may refer to the following table to set it up in Device Settings via Reolink App.

Notes on PIR Motion Sensor PIR Sensor Detection Range The PIR detection
range can be customized to meet your speciﬁc needs. You may refer to the
following table to set it up in Device Settings via Reolink
App.

NOTE: The detection range would be wider with higher sensitivity but it would lead to more false alarms. It is recommended to set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.

Important Notes on Reducing False Alarms

Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc.
Do not place the camera near any outlets, including the air conditioner vents, humidiﬁer outlets, the heat transfer vents of projectors, etc.
Do not install the camera at places with strong wind.
Do not face the camera towards a mirror.
Keep the camera at least 1 meter away from any wireless devices, including WiFi routers and phones in order to avoid wireless interference.

Notes on Rechargeable Battery Usage

Reolink Argus 2 or Argus Pro is not designed for 24/7 full capacity running or around-the-clock live streaming. It’s designed to record motion events and remotely view live streaming only when you need it. Learn useful tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893

Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel. Do not charge the battery with solar panels from any other brands.
Charge the battery in temperatures between 0°C and 45°C and always use the battery in temperatures between -20°C and 60°C.
Make sure the battery compartment is clean and the battery contacts are aligned.
Keep the USB charging port dry, clean and free of any debris, and cover the USB charging port with the rubber plug when the battery is fully charged.
Never charge, use or store the battery near any ignition sources, such as ﬁre or heaters.
Store the battery in a cool, dry and ventilated environment.
Never store the battery with any hazardous or combustible objects.
Do keep the battery away from children.
Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and negative (-) terminals. Do not transport or store the battery with necklaces, hairpins or other metal objects.
Do not disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water, ﬁre, microwave ovens and pressure vessels.
Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways. If the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it.
Always follow the local waste and recycle laws when you get rid of the used battery.

Troubleshooting

Camera is not powering on
If your camera is not powering on, please apply the following solutions:

Make sure the battery is correctly inserted into the compartment.
Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is fully charged.
If you have another spare battery, please swap the battery to have a try.

If these won’t work, please contact Reolink Support https://support.reolink.com/.

Failed to scan the QR code on the phone
If you fail to scan the QR code on your phone, please apply the following solutions:

Remove the protective ﬁlm on the lens of the camera.
Wipe the camera lens with a dry paper/towel/tissue.
Vary the distance between your camera and the mobile phone so that the camera can focus better.
Try to scan the QR code under sufficient lighting.

If these won’t work, please contact Reolink Support https://support.reolink.com/.

Failed to connect to WiFi during initial setup
If the camera fails to connect to WiFi, please try the following solutions:

Make sure the WiFi frequency band meets the network requirement of the camera.
Ensure that you have entered the correct WiFi password.
Put the camera closer to your router to ensure a strong WiFi signal.
Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
Set your password using only the characters available on the keyboard.

If these won’t work, please contact Reolink Support https://support.reolink.com/.

Speciﬁcations

Video
Video resolution: 1080p HD at 15 frames/sec Field of View: 130° diagonal
Night Vision: Up to 10m (33 ft)

PIR Detection & Alerts
PIR Detection Distance: Adjustable/up to 10m (33ft)
PIR Detecting Angle: 120° horizontal

Audio Alert:
Customized voice-recordable alerts
Other Alerts: Instant email alerts and push notiﬁcations

General
Operating Frequency: 2.4GHz
Operating Temperature: -10°C to 55°C (14°F to 131° F)
Weather Resistance: IP65 certiﬁed weatherproof
Size: 96 x 58 x 59mm
Weight (Battery included): 260g (9.2 oz)
(Argus 2)/230g (8.1 oz) (Argus Pro)

Notiﬁcation of Compliance

FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more information, visit:

https://reolink.com/fcc-ompliance-notice/.

Simpliﬁed EU Declaration of Conformity

Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

Limited warranty

This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more:
https://reolink.com/warranty-and-return/.

NOTE: We hope that you enjoy the new purchase. But if you are not satisﬁed with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children.