PRINICS C210 Instant Photo Printer Combo User Guide

PRINICS C210 Instant Photo Printer Combo

Smartphone App Installation

1.  Go to Play Store or App Store on the smartphone.
2.  Search “Kodak Instant Printer”
3.  Install it to your smartphone.

Bluetooth Connection

1.  Turn on Bluetooth in your smartphone.
2.  Turn on Instant 2 in 1 Camera.
3.  Go to Bluetooth setting in your smartphone and select
   “KODAK instant-XXXX” (’XXXX’ are 4 digits combinations of numbers and letters.)

Before Start

1. Mini Shot has a built-in battery. Charge Mini Shot before using it.
2. How to change the cartridge. Pull out or Push-in cartridge with handle.

Take a Photo

1. Turn on Mini Shot by pressing the power button.
2. Press the shutter button to take the photo after positioning the subject on the LCD screen.

Power, Shutter, and Active Status

• Shutter Button: Take a Photo
• Power ON: White / Power OFF(2Sec): Off / Printing: White flicking F.W Upgrade: Pink flickering / No Cartridge, Error: Red Flickering Waiting, Cooling: White
• Charging : Red / Charging Complete : Green
• Connecting: Blue Blink / Bluetooth Complete: Green

Control Panel

1. Menu: You can select Borders, Filters, Flash, or Language
2. Print: Print image on LCD.
3. Arrow Button: You can go to left or right in the menu.
4. OK: Confirm the setting or selected menu.

Menu

•  Border: You can select the border of the printed image.
•  Filter: You can select filters when you take the photo
• Flash: You can set Flash Auto or Off.
•  Language: You can set language
  Taken photos are deleted when the camera is powered OFF.

Note

1. Photo Paper will go in and out 4 times (Yellow, Magenta, Cyan, Overcoating).
2. Do not touch the paper during the printing process for the best image quality
3. Do not pull the paper out by force during printing.
4. Do not place an object in front of the paper exit slot.
5. Use the latest application for the best print quality. Check the latest app version from Google Play Store and Apple App Store.
6. The printer has a built-in battery. Charge the printer before using it.
7. Handle with care during charging to prevent electric shock.
8. Do not disassemble or deform.
9. Avoid too high or low temperature or humidity.
10. The higher resolution the image has, the higher quality of the printed photo has. Recommended image size is 1280*2448 pixels.
11. Operating Temperature: 0~40℃ (32104 °F)

Troubleshooting

Paper Jam

| Power off and Power On again. Paper will be automatically ejected If not, please contact customer service.

Image quality is not good.

|

Print quality could be less if your photo source has low resolution.

Over 1280 x 2448 pixel is recommended for best image quality.

Mini Shot is not responding|

RESET

Press Reset button with sharp tool like pin. __

Spec

1. Dimension 134.6(W) x 79.2(H) x 26.4(D) mm
2. LCD Viewfinder O
3. Paper Capacity 20, 30, 50 Sheet
4. LCD UI Function Print, Photo Frame, Brightness, Filter, Reprint, Flash
5. Camera 10 Mega Pixel
6. Connectivity Bluetooth
7. Color 2 Colors; White, Kodak Yellow
8. Paper Size 54 x 86 mm(Credit Card Size)
9. Cartridge All-in-One 4Pass Cartridge
10. Print Technology 4Pass
11. Smart Phone Printing O

FCC

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This appliance and its antenna must not be co- located or operated in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>