morepro Smart Sports Watch Instructions

morepro Smart Sports Watch

 **Instructions**

Quick Start

Power Button

Touch screen

Set up your smart watch

1. Download the FitCloudPro app :
   ·Apple App Store for iPhones
   ·Google Play Store for Android phones
   ·Or scan the attached QR code below to download.

2. Install the app, and open it.
   ·If you already have a FitCloudPro account, log in to your account.
   ·If you don’t have a FitCloudPro account, tap “Join Us” to create an account for a better user experience.

3. Continue to follow the on-screen instructions to connect the smart watch to your account.

Strap installation

Get Notifications

Go to the FitCloudPro app–>Device–>Push Notifications–>Turn on the switch of the app you need to receive notifications. Please don’t forget to allow the notification permission of the phone.

Smartwatch firmware upgrade

The APP will prompt that there is a new watch firmware version. You can enter the APP “Device” interface to Upgrade it.

Smartwatch Upgrade notes:

1. The watch’s battery should be above 60%
2. During the up grade process, the mobile phone interface will show an upgrade progress bar, please do not do any operations.

Set Time

Once the device is successfully connected to the APP, the time and date will be synchronized with your phone.

Change Watch Face

Open the FitCloudPro App–>Device–>Watchface (IOS) / DialLibrary (Android) –>Select the FIRST picture to edit picture in your own gallery as the watch face

Switch Units

Open the FitCloudPro App–> Me –> Unit Prefer –> Set units for length, weight or temperature

Auto Monitoring

Please go to your APP–>Device–>Turn on the switch of the Automatic Health Monitor and Elevated Heart Rate Measurement

Waterproof instructions

Waterproof rating:IP68

The watch is waterproof which you can wear it to swin or do water activities. But it cannot be taken to hot bath, diving.

Supplement: It is not recommended to wear it in a hot bath. Water vapor produced when washing hot water. Its molecular radius is small, and it is easy to seep into the gap of the watch case. When the temperature drops, it will gradually condense into water droplets, which will damage the circuit board of the watch and damage the watch.

Unbind or add device

Open the FitCloudPro app and tap “Device”> “Unbinding Bracelet” or “Add Peripheral”

NOTE:

1. The app can only connect to one watch. To connect to another watch, please unbind the connected watch first.
2. To successfully connect the watch and mobile phone, you need to turn on the Bluetooth connection device of the mobile phone.
3. If you use an Android phone, it needs to turn on the location information function of the mobile phone system, otherwise, the device may not be searched.

Function introduction

Maintenance

Safety instructions

service@morepro.cc
If you have any questions, please feel free to contact us.
www.morepro.cc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>