WISELAZER S20 7500 Lumens Video Projector User Manual

: June 6, 2024
: WISELAZER

Table of Contents

PACKING LIST
WARNING
FUNCTION OVERVIEW
QUICK START
KEYSTONE CORRECTION
INPUT SOURCE
LANGUAGE SETTING
WIFI CONNECTION
PROJECTION DISTANCE & SIZE
WIRELESS SCREEN MIRRORING
WIRELESS SCREEN MIRRORING
SPECIFICATION
TROUBLESHOOTING GUIDE
FCC Warning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WISELAZER S20 7500 Lumens Video Projector User Manual

PACKING LIST

Carrying Bag
S20
Remote (Batteries Not Included)
User Manual
Power Cable
HDMI Cable
Lens Cloth

WARNING

Don’t look straight into the light from the projector lens.
Don’t put projector in a damp, humid environment to avoid electrocution.

FUNCTION OVERVIEW

QUICK START

Please install the batteries for the remote control.
Plug the power cord into an outlet.
Take off the lens cover.
Press to eject the kickstand.
Place the projector on a flat surface.
Press the Power Button to turn on the projector.

KEYSTONE CORRECTION

INPUT SOURCE

LANGUAGE SETTING

Select “Setting” on the projection image.
Select “Language Setting” on the projection image.

WIFI CONNECTION

Select “Setting” on the projection image.
Select “WiFi Setting” on the projection image. Setting
Wait for the projector to search for available networks.
Choose your network name and enter the password to connect.

PROJECTION DISTANCE & SIZE

DISTANCE & SIZE
The recommended projection screen is around 100 inches with a distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images.

WIRELESS SCREEN MIRRORING

For iOS device
SCREEN MIRRORING

Make sure that your iOS device is connected to the same network as your projector.
Select “HummingBirdCast” on the projection image.
On your iOS device, open “Control Center” and tap “Screen Mirroring”.
On your iOS device, Looking for devices that can be mirrored on.
Select “BirdCast-392b” from the list.

WIRELESS SCREEN MIRRORING

For Android device

Make sure that your Android device is connected to the same network as your projector.
Select “MiraCast” on the projection image.
Turn on the wireless projection function of your Android phone.
On your Android device, Looking for devices that can be mirrored on.
Select “NEWLINK-392b” from the list.

SPECIFICATION

Display Technology	LCD	Resolution	Native 1920 x 1080
Light Source	LED	Installation Type	Front/Rear/Ceiling
Focus	Manual	Keystone	±25°
Speaker	3W 4Ω	Mounting Screw	1/4”
Unit Dimension	8.66 x 6.89 x 2.52 in (220 x 175 x 64 mm)	Input Signal

TROUBLESHOOTING GUIDE

Blurry Image
- Rotate the lens to focus.
- Use the remote control to achieve keystone correction.
- Projector and screen/wall must be in effective distance.
Remote Unresponsive
- Make sure remote points at Infrared Receiver directly.
- Do not cover Infrared Receiver.
- Try a new pair of AAA batteries.
UP Side Down Images
- Go to Setting > Projection Image Setting > Projection Mode to flip the projection image.
Adjust the Image Size
- Go to Setting > Projection Image Setting > Digital Zoom to adjust the image size.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.