WISELAZER S20 Projector TV User Manual
- June 6, 2024
- WISELAZER
Table of Contents
WISELAZER S20 Projector TV
PACKING LIST
WARNING
- Don’t look straight into the light from the projector lens.
- Don’t put projector in a damp, humid environment to avoid electrocution.
FUNCTION OVERVIEW
QUICK START
-
Please install the batteries for the remote control.
-
Plug the power cord into an outlet.
-
Take off the lens cover.
-
Press to eject the kickstand.
-
Place the projector on a flat surface.
-
Press the Power Button to turn on the projector.
KEYSTONE CORRECTION
INPUT SOURCE
LANGUAGE SETTING
- Select “Setting” on the projection image.
- Select “Language Setting” on the projection image.
WIFI CONNECTION
- Select “Setting” on the projection image.
- Select “WiFi Setting” on the projection image.
- Wait for the projector to search for available networks.
- Choose your network name and enter the password to connect.
PROJECTION DISTANCE & SIZE
The recommended projection screen is around 100 inches with a distance of around 9.84ft. Ambient darkness will improve the clarity of the projected images.
WIRELESS SCREEN MIRRORING
For iOS device
-
Make sure that your iOS device is connected to the same network as your projector.
-
Select “HummingBirdCast” on the projection image.
-
On your iOS device, open “Control Center” and tap “Screen Mirroring”.
-
. On your iOS device, Look for devices that can be mirrored on.
-
Select “BirdCast-392b” from the list.
For Android device
-
Make sure that your Android device is connected to the same network as your projector.
-
Select “MiraCast” on the projection image.
-
Turn on the wireless projection function of your Android phone.
-
On your Android device, Look for devices that can be mirrored on.
-
Select “NEWSLINK-392b” from the list.
SPECIFICATION
| Display Technology | LCD | Resolution | Native 1920 x 1080 |
|---|---|---|---|
| Light Source | LED | Installation Type | Front/Rear/Ceiling |
| Focus | Manual | Keystone | ±25° |
| Speaker | 3W 4Ω | Mounting Screw | 1/4” |
TROUBLESHOOTING GUIDE
Blurry Image
- Rotate the lens to focus.
- Use the remote control to achieve keystone correction.
- Projector and screen/wall must be an effective distance.
Remote Unresponsive
- Make sure remote points at Infrared Receiver directly.
- Do not cover Infrared Receiver.
- Try a new pair of AAA batteries.
UP Side Down Images
- Go to Setting > Projection Image Setting > Projection Mode to flip the projection image.
Adjust the Image Size
- Go to Setting > Projection Image Setting > Digital Zoom to adjust the image size.
WISELAZER SUPPORT
Technical Support: [email protected]
Customer Service: [email protected]
S20 Online Help