YOOTECH X2 Wireless Charger User Guide
- June 6, 2024
- YOOTECH
Table of Contents
YOOTECH X2 Wireless Charger
Instructions
1. Please choose a certified 5V,2A adapter, or 9V,2A fast charging adapter.
2. Connecting power with USB port, the indicator will light up for 3 seconds when power is on.
3. CD Locate your phone on the charging stand and make sure it is at the sweet spot for effective charging.
LED lights up for 16s
When the phone is charged successfully, the LED indicator will light up for 16 seconds then off to keep the whole charging process sleep-friendly.
- Product Specification
- Model: X2
- Size: 81 91.3113.Smm
- Input: sv2A ,9V2A
- Effective Induction Distance: 4mm-6mm Coil: 2 coils
- Attention
- Keep the charger away from water and other liquid.
- Please make sure the power is cut off before cleaning the charger
- Use the charger between 0-45°C
Cases/ Cables/ Adapters Recommended
FCC Statement
This device complies with part 18 of the FCC Rules. Operation is Subject To the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>