YOOTECH X2 Wireless Charging Stand User Manual

YOOTECH X2 Wireless Charging Stand

FCC ID: 2AOSUX2S

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter..

• Slim Case (within 4mm)
• Cost Thickness (over 4rnm)

• Metal Ring/Case
• Magnetic Pad

• Original C.-1ble/Yootech Charge Cable
• interior 3rd Party Cable

• High Quality/Phone Original Adapter
• Interior 3rd Part Adapter

Instructions

1. Please choose a certified 5V,2A adapter or 9V,2A fast charging adapter.

2. Connecting power with USB port, the indicator will light up for 3 seconds when power is on.

3. D Locate your phone on charging stand and make sure it at sweet spot for effective charging.

• When the phone is charged successfully, the LED indicator will light up for 16 seconds then off to keep the whole charging process sleep-friendly.

How to Output 5W/7.5W/10W?

Using 9V/2A fast charging adapter Samsung Galaxy Note 10/ Note10..-; s101s10 ..; S10e/ 59/ S9+/ Note 9/ Note 8/ S8/ S8 plus/S7/ S7edge/ 56 edge plus/ Note S…

| Adapter Type| Compatible Device
---|---|---
5W| Using 5V,2A adapter| Compatible withal Qi enabled devices
7.SW| Using 9V/2A fast charging adapter| iPhone 11/ 11 Pro/ 11 Pro Malt/ iPhone 8/ 8 plus/iPhone X/ XS/ XS Mel)(/ XR…

Product Specification

• Model: XZ
  

• Size: 81*91.3′ 113.8mm Input: SV= 2A ,9V =2A

• Output: 5W/7.5W/10W

• Effective Induction Distance: 4mm-6mm Coil: 2 coils

Attention

1. Keep the charger away from water and other liquid.
2. Please make sure the power is cut off before cleaning the charger.
3. Use the charger between 0-45°.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>