wallbox SPM1-100-AC Power Boost Instruction Manual

June 6, 2024
wallbox

wallbox SPM1-100-AC Power Boost Instruction

wallbox SPM1-100-AC Power -Boost -FIG 2

Important Notes

  1. Install your Wallbox charger before installing the meter.
  2. Only energy meters delivered by Wallbox are compatible.
  3. Installation must be performed by qualified personnel only, according to local regulations.
  4. Make sure to update your charger with the latest software version before installing the meter.
  5. Ensure the charger is powered off before connecting the meter.
  6. For more information, refer to your charger’s guide on Wallbox Academy.

https://support.wallbox.com/

Materials and Tools

Deviceswallbox SPM1-100-AC Power -Boost -FIG 3

Toolswallbox SPM1-100-AC Power -Boost -FIG 4

Placement

Place the Power Boost energy meter after the mains supply and before the split power.wallbox SPM1-100-AC Power -Boost -FIG 5

Carlo Gavazzi

  1. For Carlo Gavazzi meters, please follow the meter’s manual included in the box.wallbox SPM1-100-AC Power -Boost -FIG 6

wallbox SPM1-100-AC Power -Boost -FIG 7 wallbox
SPM1-100-AC Power -Boost -FIG 8

Temco

SPM1-100-AC

  1. Used for 1-Phase installation. Up to 100A.
  2. Clip the power meter to the mains power cable.
  3. The neutral cable must not be drawn through the clamp. wallbox SPM1-100-AC Power -Boost -FIG 10

Electrical Wiring

Configuration

  1. Log-in to the Wallbox App.
  2. Approach the installed charger.
  3. Select the charger and wait for syncronization to complete.
  4. After synchronization is complete, enable Power Boost in the settings.
  5. In Max Current per phase field, specify the main breaker’s rated current or subscribed current, whichever is lower.
  6. Only Max Current per phase > 6 A is accepted for correct performance. Contact Wallbox Service in case of doubts.

Status Displays

  1. Energy meter detected.

  2. Power Boost not configured.
    Ready to adjust the charging 2. speed.

  3. Limiting the charging speed.

  4. The system has no power available 4. to charge.

  5. The system has lost communication to the power meter.

Commander 2wallbox SPM1-100-AC Power -Boost -FIG
12

Copper

wallbox SPM1-100-AC Power -Boost -FIG 13

Pulsar Plus

Service
Need more assistance? You can reach out to us!

  • United Kingdom
    +44 20 3318 3779

  • Italia
    +39 011 1962 2461

  • Ireland
    +353 14 854 347

Documents / Resources

| wallbox SPM1-100-AC Power Boost [pdf] Instruction Manual
SPM1-100-AC Power Boost, SPM1-100-AC, Power Boost
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals