New Times Global NT-B809 Bluetooth Speaker Instruction Manual
- June 6, 2024
- New Times Global
Table of Contents
Global NT-B809 Bluetooth Speaker
Instruction Manual
Please read all of the instructions carefully and retain them for future reference
Safety Instructions
- When using electrical units. basic safety precautions should always be followed.
- Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this unit. only if they have been given supervision or instruction concerning the use of the unit in a safe way and understand the hazards involved .
- Children should be supervised to ensure that they do not play with the unit.
- Unless they are older than 8 and supervised. children should not perform cleaning or user maintenance .
- This unit is not a toy .
- This unit contains no user-serviceable parts. if the unit and any of its accessories are malfunctioning or it has been dropped or damaged. only a qualified electrician should carry out repairs, improper repairs may place the user at risk of harm .
- Keep the unit out of reach of children .
- Keep the unit away from heat or sharp edges that could cause damage .
- Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquid .
- Keep the unit free from dust lint etc.
- Do not immerse the unit in water or any other liquid.
- Do not operate the unit if it has been exposed to water, moisture, or any other liquid to prevent electric shock . explosion and/or injury to yourself and damage to the unit.
- .Do not use the unit for anything other than its intended use.
- Do not store the unit in direct sunlight or in high humidity conditions.
- Do not put objects into any of the openings.
- Do not play music at excessive volume levels as damage to hearing and/or the equipment may occur. It is imperative to unplug the adaptor after the unit has been used. before it is cleaned and whilst being repaired .
- To prevent possible hearing damage, do not listen to high volume levels for long periods of time.
- Waming : Keep the unit away from flammable materials.
Special Care
Do not present the unit in direct sunlight or UV light, as the Air Pad surface (Thermoplastic Polyurethane) will be yellowing by UV.
Specifications
Power Supply: DC 5V/1A
Output Power : 5W
Driver Unit : 40 5W
Storage class: Max Size 64Gb
SIN Ratio : k 65dB
THD: >1%
Rechargeable Battery : Lithium 3.7V 3000mAh
Product Size : W2481-196*D93 mm
Getting Started
- Remove the unit from the box.
- Remove any packaging from the unit.
- Place the packaging inside the box and either store or dispose of safety
In The Box
Bluetooth Speaker 1
USB Charging Cable1
3.5 mm Aux-in Cable 1
Instruction Manual 1
Description of Parts 6
1. Power On/Off Button | 6. Charging Indicator |
---|---|
2. PrevNOL- | 7. Charging Input |
3. Play/Pause | 8. AUX IN |
4. NextNOL+ | 9. TF Card Slot |
5. Lighting Control Button |
Instructions for Use
Bluetooth Operation
- Long pressing Power button to turn on the speaker .
- The speaker will default into Bluetooth mode when first turned on .
- Turn on the Bluetooth setting of your device and search the pairing name “NT-B809” .
- Music is ready to play after being paired.
- During the play, press ‘= or “+” for the previous or next song, keep pressing or “+” can increase or reduce the volume.
- Press twice the Play/Pause button to disconnect the Bluetooth connection.
TF Operation
- Insert TF. speaker will play the music directly.
- Press the Play/Pause button then pause or play the music.
- During the play, press -” or “+” for the previous or next song, keep pressing -” or “+” can increase or reduce the volume.
****Please don’t take out TF card while playing .otherwise. TF card will be damaged
Aux In Operation
- Press the Power button to AUX-IN mode.
- Insert AUX-IN cable and connect to your device to play music.
Radio Operation
- Press the Power button to FM Radio mode. you can listen to any radio channel of 88MHz-108MHz.
- Pressing the “Play/Pause” button to automatic radio scan.
- Press -” “+” change to previous and next program. keep pressing ‘+’ can reduce or increase the volume.
Instructions for Use
LED Lighting Operation
- The speaker will default into slow breathing mode
- Press the Lighting button to shift into fast breathing mode
- Press Lighting again change to white light color to select single color breathing. single light sequence: White – Green – Red – Blue – Pink – Yellow – Light Blue. then press again to turn off the light.
TWS Operation:
- Turn on two NT-B809 units and make sure without connecting other devices, keep pressing Play/Pause to TWS mode, then the two units will be paired, there is tone after paired successfully.
- Using your device to search the pairing name “NT-B809”, music is ready to play for the two units together after being paired.
Supplement:
- Mode Switch Sequence: BT—>TF–>FM—>AUX IN
- Default Mode: BT
- Support the memory function after disconnected under TF mode
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator& your body.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.