onn WIBWHT100093011 3 In 1 Magsafe Wireless Charger User Guide

onn WIBWHT100093011 3 In 1 Magsafe Wireless Charger User Guide

What’s Include

1. 3 in 1 Mag safe® Wireless charger

2. 30W Adapter

3. User Manual

Get to know your 3 in 1 Magsafe Wireless charger

Compatibility

• Made for iPhone® 13 Pro Max, iPhone® 13 Pro, iPhone® 13, iPhone® 13 mini, iPhone® 12 Pro Max, iPhone® 12 Pro, iPhone® 12 and iPhone® 12 mini (15W for iPhone® 13 and iPhone® 12 series, 7.5W for iPhone® 8 versions and newer)
• Made for Apple Watch Series 1, Apple Watch Series 2, Apple Watch Series 3, Apple Watch Series 4, Apple Watch Series 5, Apple Watch SE, Apple Watch Series 6 Apple Watch Series 7
• Made for Air Pods 2(need have wireless charging case), Air Pods 3, Air Pods Pro
• Also charges with other Qi-enabled devices

How to charge your devices.

• Connect to Power Supply

• Connect to 30W adapter before plugging into power outlet for power supply
  3 in 1 Wireless charger
  

• Begin to charge

• Remove any foreign object (if any)
  Example: Magnet, holder, key or card
  

Thick protective case > 5mm or a case includes magnet or metallic material, may not allow proper charging function.

Power

Provide power to the Mag Safc® Charging using Apple-branded compatible power adapters, or third-party power adapters that are compliant with applicable country regulations and international and regional safety standards, including the Standards for Safety of Information Technology Equipment (IEC 60950-I) and the Standards for Safety of Audio Video, Information and Communication Technology Equipment (IEC 62368-1). Other adapters may not meet applicable safety standards, and using them could pose a risk of death or injury.

Recommended Power Adapter Specifications

• Frequency: 50 to 60 Hz, single phase
• Line Voltage: 100 to 240 VAC
• Output Voltage/Current: 9 VDC/3.3A
• Minimum Power Output: 30W
• Output Port: 3.5mm DC

Important Safety Instructions

Don’t use the Mag Safe Charger or the DC power adapter in wet locations, such as near a sink, bathtub, or shower stall, and don’t connect or disconnect them with wet hands. Disconnect the Mag Safe Charger, its cable, and the power adapter if any of the following conditions exists: You want to clean the MagSafe6 Charger or the power adapter; the power cord or plug becomes frayed or otherwise damaged; the Mag Safe Charger, its cable, or the power adapter is exposed to rain, excessive moisture, or liquid; or the MagSafer9 Charger, its cable, or the power adapter has been dropped, damaged, or you suspect it has been serviced or repaired. When you use the DC power adapter, make sure the cable is fully inserted into the power adapter before you plug the adapter into a power outlet.

When using the Mag Safe® Charger, remove metallic cases and avoid placing metallic foreign objects on it (for example, keys, coins, batteries, jewelry), as they may interfere with charging or become warm enough to cause discomfort or injury if your skin comes into contact with them. Don’t place any item with an RFID tag (for example, a contactless credit card, passport, or access card) on the Mag Safe® Charger, because the RFID tag could be damaged.

Medical Device Interference

The Mag Safe® Charger contains magnets and radios that emit electromagnetic fields. These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacture for information specific to your medical device and whether you and the Mag Safe® Charger. If you suspect the Mag Safe® Charger is interfering with your medical device, Stop using the Mag Safe® Charger.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Radiation Exposure statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Need help? We’re here for you every day from 7a.m.-9p.m. CST Give us a call at 1-888-516-2630

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>