CELESTRON 44360 LCD Digital Microscope User Guide
- June 6, 2024
- Celestron
Table of Contents
CELESTRON 44360 LCD Digital Microscope
INSIDE THE BOX
[A] LCD Digital Microscope(1)
[B] AC Plug Adapter (1) (US Version) *44361 see below
[C] USB Cable (1)
[D] AV Cable (1)
[E] Calibration Ruler (1)
[F] Quick Start Guide (1)
[G] Cleaning Fabric (1)
[H] Rechargeable Lithium Ion Battery (1)
INSTALL BATTERY
Open Battery door.- Insert Lithium Battery following the polarities shown inside the compartment.
INSERT MICRO SD CARD**
into the micro SD card slot; gently press in until card is latched.
NOTE: You can still view images on LCD screen without the Micro SD card,
they cannot be saved to the unit. See manual on CD for complete instructions
on using the software and your PC.
TURN ON MICROSCOPE by pressing On/Off button.
PLACE OBJECT to be observed on the stage.
ROTATE THE STAGE ADJUSTMENT WHEEL [A] to bring the object near the
microscope tube.
LOCKING THE STAGE IN PLACE [C] by rotating the stage locking wheel.
44361 – AC Multi-Country Plug Adapter (1) Micro SD Card Not Included
NOTE: You can still view images on LCD screen without the Micro SD card,
they cannot be saved to the unit.
ROTATE THE FOCUS WHEEL [B] to bring object in clear focus.
PRESS THE CAPTURE BUTTON to take a photo or record video.
ZOOM IN ON OBJECT using the up arrow. Zoom out using the down arrow.
CONNECT THE MICROSCOPE to the computer by the included USB cable to A.)
Transfer Files or B.) Preview image on a computer screen.
CONNECT THE MICROSCOPE to a TV monitor by A.) inserting the 1/8” plug on
the end of the supplied AV cable into the microscope Video port (on back of
base) and the RCA plug into the yellow “video” input connector on TV.
NOTE: For full manual instructions go to the product page at celestron.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>