New Times Global NT-F9L Portable Bluetooth Speaker User Manual
- June 5, 2024
- New Times Global
Table of Contents
NT-F9L Portable Bluetooth Speaker
User Manual
Please read all of the instructions carefully and retain them for future reference
Safety Instructions
- When using electrical units, basic safety precautions should always be followed.
- Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this unit, only if they have been given supervision or instruction concerning the use of the unit in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the unit.
- Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
- This unit is not a toy.
- This unit contains no user-serviceable parts, if the unit and any of its accessories are malfunctioning or it has been dropped or damaged, only a qualified electrician should carry out repairs, improper repairs may place the user at risk of harm.
- Keep the unit out of reach of children.
- Keep the unit away from heat or sharp edges that could cause damage.
- Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquid.
- Keep the unit free from dust lint etc.
- Do not immerse the unit in water or any other liquid.
- Do not operate the unit if it has been exposed to water, moisture, or any other liquid to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.
- Do not use the unit for anything other than its intended use.
- Do not store the unit in direct sunlight or in high humidity conditions.
- Do not put objects into any of the openings.
- Do not play music at excessive volume levels as damage to hearing and/or the equipment may occur. It is imperative to unplug the adaptor after the unit has been used , before it is cleaned and whilst being repaired.
- To prevent possible hearing damage, do not listen to high volume levels for long periods of time.
- Warning: Keep the unit away from flammable materials.
Specifications
| Power Supply : | USB 5V / 1A |
|---|---|
| Output Power : | 8W*2 |
| Driver Unit : | 4″3Ω*2 |
| Bluetooth Version : | V5.0 |
| Storage class: | Max Size 32Gb |
| FM Frequency Range : | 87.5-108 MHz |
| Frequency Response : | 80Hz – 20KHz |
| S/N Ratio: | ≥65dB |
| Rechargeable Battery : | Lithium 3.7V 5400mAh |
| Product Size : | W545H266D194 mm |
Getting Started
- Remove the unit from the box.
- Remove any packaging from the unit.
- Place the packaging inside the box and either store or dispose of safety
In The Box
| Bluetooth Speaker | *1 |
|---|---|
| USB Charging Cable | *1 |
| 3.5 mm Aux in cable | *1 |
| Remote Control | *1 |
| Wireless Microphone | *1 |
| Carry Strap | *1 |
| Instruction Manual | *1 |
Description of Parts
| 1. Mode | 8. AUX IN |
|---|---|
| 2. Prev/VOL3. | 9. TF Card Slot |
| Play/Pause | 10. USB Card Slot |
| 4. Next/VOL+ | 11. Microphone One Input |
| 5. Equalizer (Two Mode) | 12. Microphone Two Input |
| 6. Number | 13. DC 5V Charging Input |
| 7. Number | 14. Power On/Off Switch |
Instructions for Use
Bluetooth Operation
- Power on the speaker.
- The speaker will default into Bluetooth mode when first turned on.
- Turn on the Bluetooth setting of your device and search the pairing name “NT-F9L”.
- Music is ready to play after being paired.
- Long pressing the “ Play/Pause ” button to disconnect the Bluetooth connection.
USB/TF Operation
- Insert USB/TF, the speaker will play the music directly.
- Press the “ Play/Pause ” button then pause or play the music.
- During the playback, long pressing the “Next or Prev” buttons to adjust the volume.
- Press the “0-9” button to play the song list.
Please don’t take out the USB/TF card while playing, otherwise, USB/TF card will be damaged
Aux In Operation
- Press the “ Mode ” button to AUX-IN mode.
- Insert AUX-IN cable and connect to your device to play music.
Radio Operation
Press the “ Mode ” button to FM Radio mode.
Long pressing the “ Play / Pause ” button to run an auto scan and save
available channels.
Press “ Prev ” or “ Next ” to change to the previous and next channel, or
press the number button to locate the saved channels, for example, if you want
to listen to saved channel 12, then press numbers “1” and “2” .
Press number to manual searching channels by frequency, for example, if you
want to search channel frequency 97.1, then press number “0”, “9”, “7” and
“1”, channel frequency 107.5, then press number “1”, “0”, “7” and “5” .
Instructions for Use
LED Lighting Operation
- The speaker will default to LED lighting when powered on.
- Long pressing the “0” button to off the LED lighting.
Hands-Free Operation
- Press the “Play/Pause” button to answer the call.
- Press the “Play/Pause” button again to hang up the call.
Record Operation
Insert wired microphone or connect with wireless microphone
Insert a USB stick or TF card which is available with storage.
Long pressing the “ EQ ” button to enter into record mode, and start
recording.
Press the “EQ” button again to exit record mode after finished recording.
Supplement:
- Default Mode: BT
- Mode Switch Sequence: BT–>USB–>TF–>FM–>AUX IN
- Play the latest insert in priority while power on.
- If the device was inserted with USB/TF/AUx and powered on, then USB mode is in priority when restarting the device.
- The maximum volume is level U16, the volume will be automatically limted at level U06 after the speaker is under lower battery status and alerted with a lower battery prompt tone .
Instructions for Use
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator& your body.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>