makita XBU03 Brushless Cordless Blower Kit Instruction Manual

: June 14, 2024
: Makita

makita XBU03 Brushless Cordless Blower Kit

makita-XBU03-Brushless-Cordless-Blower-Kit-product

Product Information

Specifications:

Model: XBU03
Capacities:
- Air volume: 0 – 13.0 m3/min (0 – 459 cu.ft./min)
- Air speed (average): 0 – 43.2 m/s (0 – 96 MPH)
- Air speed (max.): 0 – 52.1 m/s (0 – 116 MPH)
- Overall length (with front nozzle): 825 mm (32-1/2)
- Rated voltage: D.C. 18 V
- Net weight: 2.5 – 3.0 kg (5.4 – 6.7 lbs)
Applicable battery cartridge, battery adapter, and charger:
- Battery cartridge: BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
- Battery adapter: PDC01
- Charger: DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

Product Usage Instructions

Safety Warnings:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged battery. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
Use extra care when cleaning on stairs.
Use only the charger supplied by the manufacturer to recharge.

Cordless Blower Safety Instructions:

Preparation:

Always wear substantial footwear and long trousers while operating the blower.
Do not wear loose clothing or jewelry that can be drawn into the air inlet. Keep long hair away from the air inlets.
Always use protective goggles, a cap, and mask when using the blower. Ordinary eye or sun glasses are NOT safety glasses.
To prevent dust irritation, the wearing of a face mask is recommended.
While operating the machine, always wear non-slip and protective footwear. Non-skid, closed-toed safety boots and shoes will reduce the risk of injury.

Operation:

Never operate the blower while people, especially children, or pets are nearby.
Switch off the blower and remove the battery cartridge and make sure that all moving parts have come to a complete stop.
Operate the blower only in daylight or in good artificial light.
Do not overreach and keep proper balance and footing at all times.
Never blow debris in the direction of bystanders.
Operate the blower in a recommended position and on a firm surface.

FAQs

Q: What are the capacities of the XBU03 blower?
A: The XBU03 blower has an air volume capacity of 0 – 13.0 m3/min (0 – 459 cu.ft./min), an average air speed capacity of 0 – 43.2 m/s (0 – 96 MPH), and a maximum air speed capacity of 0 – 52.1 m/s (0 – 116 MPH).
Q: What battery cartridges, battery adapters, and chargers are compatible with the XBU03 blower?
A: The XBU03 blower is compatible with the following battery cartridges: BL1815N, BL1820B, BL1830, BL1830B, BL1840B, BL1850B, and BL1860B. It is also compatible with the PDC01 battery adapter. The compatible chargers are DC18RC, DC18RD, DC18RE, DC18SD, DC18SE, and DC18SF.

SPECIFICATIONS

Model:	XBU03
Capacities	Air volume
Air speed (average)	0 – 43.2 m/s (0 – 96 MPH)
Air speed (max.)	0 – 52.1 m/s (0 – 116 MPH)
Overall length (with front nozzle)	825 mm (32-1/2″)
Rated voltage	D.C. 18 V
Net weight	2.5 – 3.0 kg (5.4 – 6.7 lbs)

Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Specifications may differ from country to country.
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge, battery adapter and charger

Battery cartridge| BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
---|---
Battery adapter| PDC01
Charger| DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

Some of the battery cartridges, battery adapters and chargers listed above may not be available depending on your region of residence.
Before using battery adapter, read instruction and cautionary markings on the battery adapter.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WARNING – To reduce the risk of fire, electric shock, or injury:

Do not leave appliance when battery fitted. Remove battery from appliance when not in use and before servicing.
Do not expose to rain. Store indoors.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged battery. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Use extra care when cleaning on stairs.
Use only the charger supplied by the manufac-turer to recharge.

SAVE THESE INSTRUCTIONS.
This appliance is intended for household use.

Cordless Blower Safety Instructions

Preparation

Always wear substantial footwear and long trousers while operating the blower.
Do not wear loose clothing or jewellery that can be drawn into the air inlet. Keep long hair away from the air inlets.
Always use protective goggles, a cap and mask when using the blower. Ordinary eye or sun glasses are NOT safety glasses.
To prevent dust irritation the wearing of a face mask is recommended.
While operating the machine, always wear non-slip and protective footwear. Non-skid, closed-toed safety boots and shoes will reduce the risk of injury.

Operation

Never operate the blower while people, espe-cially children, or pets are nearby.
Switch off the blower and remove the battery cartridge and make sure that all moving parts have come to a complete stop
whenever you leave the blower.
before clearing blockages.
before checking, cleaning or working on the blower.
if the blower starts to vibrate abnormally.
Operate the blower only in daylight or in good artificial light.
Do not overreach and keep proper balance and footing at all times.
Never blow debris in the direction of bystanders.
Operate the blower in a recommended position and on a firm surface.
Do not operate the blower at high places.
Never point the nozzle at anyone in the vicinity when using the blower.
Never block suction inlet and/or blower outlet.
- Be careful not to block suction inlet or blower outlet with dust or dirt when oper-ating in dusty area.
- Do not use nozzles other than the nozzles provided by Makita.
- Do not use the blower to inflate balls, rubber boat or the similar.
Do not operate the blower near open window, etc.
Operating the blower only at reasonable hours is recommended – not early in the morning or late at night when people might be disturbed.
Using rakes and brooms to loosen debris before blowing is recommended.
If the blower strikes any foreign objects or should start making any unusual noise or vibration, immediately switch off the blower to stop it. Remove the battery cartridge from the blower and inspect the blower for damage before restarting and operating the blower. If the blower is damaged, ask Makita Authorized Service Centers for repair.
Do not insert fingers or other objects into suction inlet or blower outlet.
Prevent unintentional starting. Ensure the switch is in the off-position before inserting battery cartridge, picking up or carrying the blower. Carrying the blower with your finger on the switch or energizing the blower that has the switch on invites accidents.
Never blow dangerous materials, such as nails, fragments of glass, or blades.
Do not operate the blower near flammable materials.
Avoid operating the blower for a long time in low temperature environment.

Maintenance and storage

Keep all nuts, bolts and screws tight to be sure the blower is in safe working condition.
If the parts are worn or damaged, replace them with parts provided by Makita.
Store the blower in a dry place out of the reach of children.
When you stop the blower for inspection, ser-vicing, storage, or changing accessory, switch off the blower and make sure that all moving parts come to a complete stop, and remove the battery cartridge. Cool down the blower before making any work on the blower. Maintain the blower with care and keep it clean.
Always cool down the blower before storing.
When you lift the blower, be sure to bend your knees and be careful not to hurt your back.

Battery tool use and care

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the machine. Carrying the machine with your finger on the switch or energizing machine that have the switch on invites accidents.
Disconnect the battery pack from the machine before making any adjustments, changing accessories, or storing machine. Such preven-tive safety measures reduce the risk of starting the machine accidentally.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use machines only with specifically desig-nated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi-nals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact acci-dentally occurs, flush with water. If liquid con-tacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or machine that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or machine to fire or excessive temperature. Exposure to fire or temperature above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge the battery pack or machine outside of the temperature range specified in the instruc-tions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the machine or the battery pack except as indicated in the instructions for use and care.

Electrical and battery safety

Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Do not charge battery in rain, or in wet locations.
Do not charge the battery outdoors.
Do not handle charger, including charger plug, and charger terminals with wet hands.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

WARNING:

Use of this product can create dust containing chemicals which may cause respiratory or other illnesses. Some examples of these chemicals are compounds found in pesti-cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-ing on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Symbols
The followings show the symbols used for tool.

V volts
= direct current

Important safety instructions for battery cartridge

Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
Do not disassemble battery cartridge.
If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
Do not short the battery cartridge:
Do not touch the terminals with any conductive material.
Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
Do not use a damaged battery.
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. For commercial transports e.g. by third parties, forwarding agents, special requirement on packaging and labeling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging.
When disposing the battery cartridge, remove it from the tool and dispose of it in a safe place. Follow your local regulations relating to disposal of battery.
Use the batteries only with the products specified by Makita. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte.
If the tool is not used for a long period of time, the battery must be removed from the tool.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum battery life

Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.
Never recharge a fully charged battery car-tridge. Overcharging shortens the battery service life.
Charge the battery cartridge with room tem-perature at 10 °C – 40 °C (50 °F – 104 °F). Let a hot battery cartridge cool down before charging it.
Charge the battery cartridge if you do not use it for a long period (more than six months).

ASSEMBLY

CAUTION:
Always be sure that the machine is switched off and the battery cartridge is removed before carrying out any work on the machine.

Installing the front nozzle

Loosen 2 screws with the hex wrench, and then pull the screws all the way.
Make sure that the Makita logo on the front nozzle is facing the direction shown in the figure, and then attach the front nozzle to the machine. $makita-XBU03-Brushless-Cordless-Blower-Kit-fig- $2$$
Tighten the screws with the hex wrench.

Installing the flat nozzle or extension nozzle

Optional accessory

Attach the adapter pipe to the front nozzle, and then turn it clockwise to lock it into place.
Attach the flat nozzle or extension nozzle to the adapter pipe, and then turn it to lock it into place.

Attaching the shoulder strap

Optional accessory

CAUTION: Be sure to attach the hooks of the shoulder strap to the machine securely. If the hooks are attached incompletely, they may come off and cause an injury.
CAUTION: Be sure to use the shoulder strap dedicated to this machine. Using other shoulder strap may cause an injury.

Attach the hooks of the shoulder strap to the machine as shown in the figure.

You can also attach the shoulder strap to the machine as shown in the figure by attaching one end of the shoulder strap to the buckle of the shoulder strap.

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the machine is switched off and the battery cartridge is removed before adjusting or checking function on the machine.

Installing or removing battery cartridge

CAUTION: Always switch off the machine before installing or removing of the battery cartridge.
CAUTION: Hold the machine and the battery cartridge firmly when installing or removing bat-tery cartridge. Failure to hold the machine and the battery cartridge firmly may cause them to slip off your hands and result in damage to the machine and battery cartridge and a personal injury.
CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the machine, causing injury to you or someone around you.
CAUTION: Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly.

To remove the battery cartridge, slide it from the machine while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery car-tridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely.

Indicating the remaining battery capacity

Only for battery cartridges with the indicator

Press the check button on the battery cartridge to indicate the remain-ing battery capacity. The indicator lamps light up for a few seconds.

$makita-XBU03-Brushless-Cordless-Blower-Kit-fig- $10$$

NOTE:
Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.

Machine/battery protection system

The machine is equipped with a machine/battery protection system. This system automatically cuts off power to the motor to extend machine and battery life. The machine will automatically stop during operation if the machine or battery is placed under one of the fol-lowing conditions:

Overload protection
When the machine or battery is operated in a manner that causes it to draw an abnormally high current, the machine automatically stops without any indication. In this situation, turn the machine off and stop the appli-cation that caused the machine to become overloaded. Then turn the machine on to restart.
Overheat protection
When the machine or battery is overheated, the machine stops automatically. In this case, let the machine and battery cool before turning the machine on again.
Overdischarge protection
When the battery capacity is not enough, the machine stops automatically. In this case, remove the battery from the machine and charge the battery.

Switch action

WARNING:
Before installing the battery car-tridge into the machine, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.

To start the machine, simply pull the switch trigger. The speed increases by increasing pressure on the switch trigger. Release the switch trigger to stop.

Cruise control function

The cruise control function allows the operator to main-tain a constant speed without pulling the trigger. To increase the speed, turn the control lever forward. To decrease the speed, turn the control lever backward.

Accidental re-start preventive function
Even if you install the battery cartridge while pulling the switch trigger, the machine does not start. To start the machine, first release the switch trigger or return the control lever fully, and then pull the switch trigger.

OPERATION

CAUTION:
Do not place the machine on the ground while it is switched on. Sand or dust may enter from suction inlet and cause a malfunction or personal injury.

Hold the machine firmly with a hand and perform the blowing operation by moving it around slowly. When blow-ing around building, big stone or vehicle, direct the nozzle away from them. When performing an operation in a corner, start from the corner and then move to wide area.

MAINTENANCE

CAUTION:
Always be sure that the machine is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

Cleaning the machine
Clean the machine by wiping off dust with a dry cloth or one dipped in soapy water and wrung out. NOTICE:
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

Remove dust or dirt from the suction inlet at the rear of the machine.

Storage

The hook hole on the bottom of the machine is conve-nient for hanging the machine from a nail or screw on the wall. Store the machine in a place out of the reach of children and not exposed to moisture or rain.

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man-ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.

State of abnormality| Probable cause (malfunction)| Remedy
---|---|---
Motor does not run.| Battery cartridge is not installed.| Install the battery cartridge.
Battery problem (under voltage)| Recharge the battery. If recharging is not effective, replace battery.
The drive system does not work correctly.| Ask your local authorized service center for repair.
Motor stops running after a little use.| Battery’s charge level is low.| Recharge the battery. If recharging is not effective, replace battery.
Overheating.| Stop using the machine to allow it to cool down.
The machine does not reach the maximum speed.| Battery is installed improperly.| Install the battery cartridge as described in this

manual.

Battery power is dropping.| Recharge the battery. If recharging is not effective, replace battery.
The drive system does not work correctly.| Ask your local authorized service center for repair.
Abnormal vibration:
stop the machine immediately!| The drive system does not work correctly.| Ask your local authorized service center for repair.
Motor cannot stop:
Remove the battery immediately!| Electric or electronic malfunction.| Remove the battery and ask your local authorized service center for repair.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita prod-uct specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

If you need any assistance for more details regard-ing these accessories, ask your local Makita Service Center.

Adapter pipe
Extension nozzle
Flat nozzle
Shoulder strap
Makita genuine battery and charger

NOTE:
Some items in the list may be included in the product package as standard accessories. They may differ from country to country.

MAKITA LIMITED WARRANTY

Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country.