PETZL P67 Kootenay Knot Passing Pulley Instructions

KOOTENAY

Rfu.11.114.

Knot passing pulley / Anchor plate

1891 – 892

**WARNING**

Activities involving the use of this equipment are inherently dangerous.

You are responsible for your own actions and decisions.

Before using this equipment, you must:

– Read and understand all Instructions for Use.
– Get specific training in its proper use.
– Become acquainted with its capabilities and limitations.
– Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.

1. Field of application (text part)
   Champ d’application Partie texio

2. **Nomenclature

**

3. Inspection points to verify

4. Compatibility (text part)
   Compatibility (partie text)
   Traceability and markings
   ****PETZL.com

Warning symbols

PETZL
FR-38920 Croke
Clclex 105A P
ETZLCOM
ISO 9001 ©Petzl

Sustaining our Community FOUNDATION-PETZL.ORG

5. pulley

6. Anchor place

7. Strenght

8. Positioning and redirection

9. Precautions for use

10. Additional information 

PETZL.com

These instructions explain how to correctly use your equipment. Only certain techniques and uses are described.
The warning symbols inform you of some potential dangers related to the use of your equipment, but it is impossible to describe them all. Check Petzl.com for updates and additional information.
You are responsible for heeding each warning and using your equipment correctly.
Any misuse of this equipment will create additional dangers. Contact Petzl if you have any doubts or difficulty understanding these instructions.

1. Field of application

Personal protective equipment (PPE) is used for fall protection.
Knot-passing pulley for climbing and mountaineering Rigging plate: RfU 11.114 version 1.
This product must not be pushed beyond its limits, nor be used for any purpose other than that for which it is designed.

Responsibility

WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions, decisions, and safety.

Before using this equipment, you must:
– Read and understand all Instructions for Use.
– Get specific training in its proper use.
– Become acquainted with its capabilities and limitations.
– Understand and accept the risks involved.

Failure to heed any of these warnings may result in severe injury or death.
This product must only be used by competent and responsible persons or those placed under the direct and visual control of a competent and responsible person.
You are responsible for your actions, your decisions, and your safety and you assume the consequences of the same. If you are not able, or not in a position to assume this responsibility, or if you do not fully understand the Instructions for Use, do not use this equipment.

Nomenclature

(1) Moving side plates,
(2) Sheave,
(3) Axle,
(4) Sealed ball bearing,
(5) Sheavelocking pins,
(6) Main attachment hole,
(7) Auxiliary attachment hole.

Principal materials: aluminum.

Inspection points to verify

Your safety depends upon the integrity of your equipment.
Petzl recommends a detailed inspection by a competent person at least once every 12 months (depending on current regulations in your country, and your conditions of usage).

Warning: your intensity of use may cause you to inspect your PPE more frequently.

Follow the procedures described at Petzl.com. Record the results on your PPE inspection form: type, model, manufacturer contact info, serial number or individual number, dates: manufacture, purchase, first use, next periodic inspection; problems, comments, inspector’s name, and signature.

Before each use
Verify the absence of any cracks, deformation, marks, wear, corrosion (on the side plates, axle, and locking pins). Check the condition of the sheave and verify that it is working properly.

During use
It is important to regularly monitor the condition of the product and its connections to the other equipment in the system. Make sure that all items of equipment are correctly positioned with respect to each other. Verify that the carabiners are always loaded on their major axis.

Compatibility

Verify that this product is compatible with the other elements of the system in your application (compatible = good functional interaction).
Equipment used with your KOOTENAY must meet current standards in your country (e.g. EN 12275 connectors).

Pulley

For pulley use, be sure to remove the locking pins.

Rigging plate

When the rigging plate is used as part of a fall arrest system, the user must be equipped with a means of limiting the impact force, exerted on the user when the fall is arrested, to a maximum value of 6 kN.

 Strength

Positioning

Precautions for use

– Wet or icy conditions can change the efficiency of the pulley.

Additional information

This product meets the requirements of Regulation (EU) 2016/425 on personal protective equipment. The EU declaration of conformity is available at Petzl.com.
– You must have a rescue plan and the means to rapidly implement it in case of difficulties encountered while using this equipment.
– The anchor point for the system should preferably be located above the user’s position and should meet the requirements of the EN 795 standard (12 kN minimum strength).
– In a fall arrest system, it is essential to check the required clearance below the user before each use, in order to avoid hitting the ground or an obstacle in the event of a fall.
– Make sure that the anchor point is correctly positioned, in order to limit the risk and the length of a fall.
– A fall arrest harness is the only device allowable for supporting the body in a fall arrest system.
– When using multiple items of equipment, a dangerous situation can arise in which the safety function of an item of equipment can be affected by the safety function of
another item of equipment.

– WARNING – DANGER: ensure that your products do not rub against abrasive or sharp surfaces.
– Users must be medically fit for activities at height. WARNING: inert suspension in a harness can result in serious injury or death.
– The Instructions for Use for each item of equipment used in conjunction with this product must be followed.
– The Instructions for Use must be provided to the user of this equipment, in the language of the country where the equipment is used.
– Make sure the markings on the product are legible.

When to retire your equipment:
WARNING: an exceptional event can lead you to retire a product after only one use, depending on the type and intensity of usage and the environment of usage (harsh environments, marine environments, sharp edges, extreme temperatures, chemicals…).

A product must be retired when:
– It has been subjected to a major fall or load.
– It fails to pass inspection. You have any doubt as to its reliability.
– You do not know its full usage history.
– When it becomes obsolete due to changes in legislation, standards, technique, or incompatibility with other equipment…
Destroy these products to prevent further use.

Icons:
A. Unlimited lifetime – B. Marking – C. Acceptable temperatures – D. Usage precautions – E. Cleaning – F. Drying – G. Storage/transport – H. Maintenance – I. Modifications/repairs (prohibited outside of Petzl facilities, except replacement parts) – J. Questions/contact

3-year guarantee

Against any material or manufacturing defect. Exclusions: normal wear and tear, oxidation, modifications or alterations, incorrect storage, poor maintenance, negligence, uses for which this product is not designed.

Warning symbols

1. Situation presenting an imminent risk of serious injury or death.
2. Exposure to a potential risk of accident or injury.
3. Important information on the functioning or performance of your product.
4. Equipment incompatibility.

Traceability and markings

a. Meets PPE regulatory requirements. Notified body performing the EU type- examination
b. Number of the notified body responsible for the production control of this PPE
c. Traceability: DataMatrix
d. Year of manufacture
e. Day of manufacture
f. Control or name of the inspector
g. Incrementation
h. Strength
i. Diameter
j. Read the Instructions for Use carefully
k. Model identification
l. Manufacturer address

TECHNICAL NOTICE KOOTENAY
P0005400B (161121)

0120

This product is compliant with the Regulation 2016/425 on Personal Protective Equipment as brought into UK law aid amended.
Approved body performing the UKCA type examination and the production control of this PPE :
Organisme apprcuve intervenant pour l’examen UKCA de type et le contrere de production de cet EPI :

SGS United Kingdom Ltd
Inward Way
Rossmore Business Park
Ellesmere Port, Cheshire, CH65 3EN
United Kingdom
N° 0120

References

• Petzl.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>