FANTECH Helios XD3 V2 Pro Wireless RGB Gaming Mouse User Manual
- June 6, 2024
- fantech
Table of Contents
FANTECH Helios XD3 V2 Pro Wireless RGB Gaming Mouse User Manual
Instruction manual
Thank you for purchasing FANTECH HELIOS XD3v2 Pro Wireless RGB Gaming Mouse.
FANTECH HELIOS XD3v2 has 80 millions switch and also support on-board memory which can save up to hundreds of different profiles.
FANTECH HELIOS XD3v2 is a plug and play usb interface programmable mouse, no need to install any driver for your first use. For more enhanced settings and function, you can install the software from our website www.fantechworld.com.
What’s included in the box
- Helios XD3v2
- Type-C charging cable
- USB receiver
- User manual
- 1 set PTFE mouse skates
- USB adaptor
System requirements
- 1 Operating systems: Windows XP/7/8/10. MAC OS
- USB 2.0/3.0 port
Technical specification
- Pixart 3370 Gaming Optical Sensor
- 1000Hz Polling Rate
- On-the-fly Adjustable DPI (400-19000)
- Up to 4001PS/509 acceleration
- Kailh GM8.0, 80 million clicks
- Battery capacity: 730mAh
- Battery life: up to 70 hours
- Charging time:Approx 2 hours
- Size: 120mrns58mm*38mm
- 1.8m Type-C paracord
- Weight: 83gr
Size
Keys Function Map
| KEY | KEY FUNCTION MAP |
|---|---|
| 1 | LEFT BUTTON |
| 2 | MID BUTTON |
| 3 | RIGHT BUTTON |
| 4 | FORWARD |
| 5 | BACKWARD |
| 6 | DPI |
| 7 | POWER SWITCH |
| 8 | USB RECEIVER |
How to connect
Its plug and play. Connect the mouse to computer by inserting USB receiver to your computer USB port.
How to Use
Power switch
Easily switch the mouse ON or OFF, or switch on ECO for battery saving mode.
Wired mode
To activate wired mode. simply disconnect the wireless receiver and connect
the USB cable to the mouse.
If the LED on the scroll wheel blinks red color, this indicates low battery.
Connect the USB to charge the mouse.
Note: To use the mouse with Ree lighting, be sure to connect the cable while the mouse is switched ON.
Software
Key settings
- 6 Macros button assignment
- You can set up to 4 profile
- You can set debounce time from 0-30ms 6 Macros button assignment
Advanced settings
- 6 Stages DPI customization from 50-19000DPI.
- You can customize mouse sensitivity, scrolling speed, double – click speed on advanced setup.
- You can choose mouse LOD between I mm to 2mm
Macro setup
To create new macro. follow steps below:
- Press “New Macro” bar
- Input the “Macro Name”
- Click “Start recording” to start recording and click “Stop record’ to stop recording. The macro key (Deloy/cycle time can be edited/modified)
- After click ‘Stop record”. click “save” to save the macro key.
To use the macro
- Select the designation button
- Select macro and choose the “MACRO NAME’
- Click “OK”
Lighting setup
- Customize up to 7 different Spectrum mode: Steady. Breathing, Streaming, Neon, Scrolling, Colourful Breathing, LED OFF.
- Some of the spectrum modes can be customized, such as brightness and speed.
- You can set the Auto-Sleep time from 10 sec to 40 mins
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>