dji OM 5 Mobile Phone Gimble User Manual

DJI OM 5 Mobile Phone Gimble

Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high-resolution printing.

Using this Manual

Legend

• Important    Hints and Tips

Before Use

Read the following documents before using DJI OM 5:

1. Safety Guidelines
2. Quick Start Guide
3. User Manual

It is recommended to watch all tutorial videos on the official DJI website (www.dji.com/om-5/video) or in the DJI Mimo app. Read the safety guidelines and quick start guide before using for the first time. Refer to this user manual for more information.
Downloading the DJI Mimo App
Scan the QR code to download the latest version of the DJI Mimo app.
The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version of DJI Mimo is compatible with Android v8.0 and later.

Introduction

Boasting 3-axis stabilization and equipped with a built-in extension rod, the lightweight DJI OM 5 unlocks the full potential of your mobile phone. The magnetic foldable design makes setup easier than ever and transportation and storage convenient. DJI OM 5 can be operated in both portrait and landscape and the upright, underslung, side grip, and low position modes help you capture the perfect shot. Take your content to the next level through DJI Mimo with ActiveTrackTM 4.0, Hyperlapse, Timelapse, DynamicZoom, and Pano. The brand new ShotGuides provide step-by-step tutorials according to the scenario and help you generate a video that you can share on social media.

**Overview

**

1. Magnetic Phone Clamp 2
2. Shutter/Record Button
3. Switch Button
4. Battery Level Indicators
5. 1/4”-20 UNC Port
6. System Status Indicator
7. Joystick
8. Built-In Extension Rod
9. Lanyard Hole
10. Zoom Slider
11. Trigger
12. M Button
13. Pan Motor
14. Tilt Motor
15. Roll Motor
16. Charging Port (USB-C)
17. M3×0.5 Screw Hole

Getting Started

Charging
To charge DJI OM 5, connect a USB adapter (not included) to the charging port using the power cable (included). The battery is fully charged when the battery level indicators turn off.
Charging time: 1.5 hours (tested in the environment temperature of 25° C when using a 10 W charger)
Max runtime: 6 hours (tested with the gimbal balanced and held steadily. This value should be taken as a reference only)

Attaching the Phone

1. DJI OM 5 is folded when packaged. Unfold the gimbal as shown.
2. Attach the magnetic phone clamp in the center of the phone. The magnetic phone clamp can be stretched. The camera mark should point towards the camera of the phone.
3. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the mobile phone to DJI OM 5.
4. Press and hold the M button to power on DJI OM 5.
5. The built-in extension rod can be extended to up to 215 mm and the angle can be adjusted from 0 to 90 °.
   • Make sure the direction of the magnetic phone clamp is the same as shown and it is in the middle of the phone. Otherwise, the gimbal performance may be affected.Adjust the phone clamp and make sure it is as vertical like the phone.
   • For optimal performance, use the provided riser pad if using a phone less than 7.5 mm thick or weighing less than 170 g.
   • Mount the mobile phone before powering on DJI OM 5. If no mobile phone is detected, DJI OM 5 will vibrate and enter standby mode. To bring it out of standby mode, press any button after mounting the mobile phone.

Using DJI OM 5

After powering on, DJI OM 5 will enter follow mode by default. The gimbal converts joystick movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations. The mobile phone can by adjusted by hand as well.
Button and Port Functions

M Button

When Powered off

Press once: check battery level.
Press and hold: power on.
When Powered on
Press once: switch between photo or video mode (by default) or enter quick settings (function set in DJI Mimo).
Press twice: enter standby mode (press any button to exit).
Press four times: switch between FPV and follow mode.
Press and hold: power off.

Shutter/Record Button

Press once: take a photo or start or stop recording.
Press and hold: for burst shooting when in photo mode.

Switch Button

Press once: switch between front and back cameras.
Press twice: switch between landscape and portrait mode.

Joystick

Move vertically to tilt the mobile phone. Move horizontally to pan the mobile phone. The joystick control direction can be set in DJI Mimo. The feature of joystick also can be set to switch quick settings.

Zoom Slider

Move the slider to the + position to enlarge the subject and move the slider to the – position to shrink. Push the slider once to change the zoom once. Push the slider continuously to change the zoom continuously.

Battery Level Indicators
Indicates the battery level of DJI OM 5. Refer to the table below for details. The indicators are defined below.

• LED is on.
• LED is flashing.
• LED is off.
• LED is flashing fast.

| Battery Level > 65%

| 45% < Battery Level ≤ 65%

| 30% < Battery Level ≤ 45%

| 20% < Battery Level ≤ 30%

| 10% < Battery Level ≤ 20%

| 2% < Battery Level ≤ 10%

| Battery Level ≤ 2%

System Status Indicator
Indicates the current status.

battery is over discharged)
Blinks blue three times and then grow solid green| Enter FPV mode
Blinks green three times and then grow solid green|

Exit FPV mode

Trigger
Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode.
Press once to start or stop ActiveTrack 4.0 (requires used with Mimo). Press twice to recenter the gimbal. When using ActiveTrack 4.0, the gimbal will recenter to the center of the camera view. Press once, and then press and hold to enter Sport mode. Release to exit. In Sport mode, the follow speed of the gimbal increases for capturing quick movements.

Charging Port (USB-C)
Charge DJI OM 5 by connecting a USB adapter to this port.

1/4”-20 UNC Port
The 1/4″-20 UNC port can be used to attach a tripod.

M3×0.5 Screw Hole
Used to mount counterweights. Counterweights should be used if a camera lens or microphone is mounted on the mobile phone. Make sure the total weight of these accessories is less than 290 g.

Lanyard Hole
The lanyard hole can be used to attach a wrist strap.

Combination Operation
The Bluetooth connection can be reset if DJI OM 5 cannot be connected or found. Press the switch button, shutter/record button, and trigger simultaneously to reset the Bluetooth connection. The Bluetooth connection is reset successfully when the system status indicator turns from green to yellow. Search DJI OM 5 and reconnect.
DJI OM 5 will be powered off automatically if there is no operation for three minutes in standby mode.

Operating Mode
The figures below depict the operation modes when using OM 5 in portrait mode. The same operation modes apply when used in landscape mode.

Upright Mode
Upright mode can be used without any further user input. In this mode, press the trigger twice quickly to center the mobile phone.

Underslung Mode
Hold DJI OM 5 upside down to enter Underslung mode, in which the mobile phone can easily capture images from a lower position. Press the trigger twice to center the mobile phone.

Side Grip Mode
Rotate DJI OM 5 to the right or left by 90° to go from Upright to Side Grip mode. Press the trigger twice to center the mobile phone.

Low Position Mode
Extend the built-in extension rod and adjust the angle to Low Position mode. Use Low Position mode to shoot from a low angle.

DJI Mimo App

Watch a live HD video feed on your mobile phone screen through the DJI Mimo app. The app also allows you to use ShotGuides, Story mode, Hyperlapse, Timelapse, ActiveTrack 4.0, DynamicZoom, and Pano, or configure camera and gimbal settings in just a few taps.

Device: tap to connect to DJI OM 5. Once connected, DJI Mimo enters camera view. Academy: tap to watch tutorials and view manuals.
AI Editor: provides several templates to edit photos or videos.
Home: tap to return to the home screen.
Album: manage and view footage from the phone or DJI devices.
Editor: tap to edit photos or videos from DJI OM 5 or import and edit from a mobile device.
Profile: register or log in to a DJI account. View works and settings, check likes and followers, send messages to other users, and connect with the DJI Store.

Connecting to the DJI Mimo App

1. Power on DJI OM 5.
2. Enable Bluetooth on the mobile phone and connect to the device with an OM 5 prefix name in DJI Mimo.
3. Users are required to allow access to certain information when using DJI Mimo for the first 12 © 2021 DJI OSMO All Rights Reserved. time. The exact information will be listed in the prompt. An internet connection is required.
4. DJI OM 5 will be activated after authorization and the app will enter the camera view.
   When connected via Bluetooth, DJI OM 5 is able to control the camera of the mobile phone without DJI Mimo. Refer to the Mobile Phone Compatibility List for details.

Camera View

1. Home
   Tap to return to the home screen.

2. ShotGuides
   ShotGuides provide step-by-step shooting tutorials according to the scenario and helps users to generate a video.

3. ActiveTrack Select Box
   ActiveTrack 4.0 has been optimized for tracking human subjects with a head and shoulder model along with face detection using deep learning algorithms. The subject will remain in the center of the camera view by default. The camera view can be adjusted manually. There are three ways to use ActiveTrack 4.0:

   • Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject indicates ActiveTrack 4.0 is successfully enabled. Tap the X icon on the top corner to stop tracking.
   • Enable Gesture Control in DJI Mimo and perform a palm or V gesture for one to two seconds when facing the camera. The back camera will detect the nearest head and shoulders and start to track the subject. The front camera will detect the nearest face and start to track the subject.The differences between the head and shoulder tracking and face tracking are that head and shoulder tracking supports 360° tracking while face tracking does not. Also, the detection range of the cameras are different. The detection range between the back camera and the gesture is 0.5 to 4 m, and the distance between the front camera and the gesture is 0.5 to 2 m. Note that ActiveTrack 4.0 may consume more power and cause the temperature of the mobile phone to increase.
   • Press the trigger once to start or stop ActiveTrack 4.0. When using ActiveTrack 4.0, move the joystick to adjust the camera view. Perform a palm or V gesture to stop recording.

4. Gimbal Battery Level Displays the current battery level of the gimbal.

5. Mobile Phone Battery Level Displays the current battery level of the mobile phone.

6. Flash
   Displays the flash status.

7. Gimbal Mode
   Displays the current gimbal mode: Follow, Tilt Locked, FPV, or SpinShot.

8. Front/Back Camera Switch Tap to switch between the front and back cameras of your mobile phone.

9. Shooting Modes
   Scroll to select the shooting mode.
   Hyperlapse: enable to shoot a Timelapse photo while moving the mobile phone. Tap the shutter button to begin.
   Timelapse: there are four types of timelapse (Fixed Angle, L to R, R to L, and Custom Motion). After selecting the timelapse, tap the settings at the top of the screen. For Fixed Angle, L to R, and R to L, set the interval and duration and start to shoot. For Custom Motion, select up to four positions and the gimbal will move to each position in sequence. DynamicZoom: choose from Move Out and Move In mode. After selecting a mode, drag a box to select a subject, and tap the shutter button to start shooting. Slow Motion: tap to shoot video at 4x and 8x slow motion.
   Video: tap to shoot a normal video.
   Photos: tap to take a single shot photo. Press and hold for burst shooting. Pano: tap to take a 3×3, 240°, or CloneMe panorama photo.
   Story: provides several templates for recording video.

10. Shutter Button
    Tap to take a photo or to start or stop recording video.

11. Gesture Control Switch
    Tap to access Gesture Control settings.

12. Playback
    Tap to preview photos and videos.

13. Zoom
    Place two fingers on the screen and move them apart to zoom in or move them together to zoom out.

14. Shooting Parameters
    1/100 80 0 Displays the shutter speed, ISO, and EV values.

15. Settings
    Camera Settings
    The settings vary depending on the shooting mode. Note that the flash, white balance, and grid settings are only available when using the back camera. For iOS devices, Selfie Flip is available when using the front camera in photo and video mode. For Android devices, Selfie Flip is only available in photo mode.
    Gimbal Settings
    Gimbal Mode

    • Follow: pan and tilt axes follow.
    • Tilt Locked: only the pan axis follows.
    • FPV: pan, tilt, and roll axes follow.
    • SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis rotation.
      Sport Mode Switch: tap to enable or disable Sport mode. In Sport Mode, the follow speed of the gimbal increases greatly. It is suitable for shooting in scenarios where subjects move suddenly and at fast speeds.
      Zoom Speed: tap to set the zoom speed when using the zoom slider.
      Joystick Speed: tap to set the maximum speed when controlling the joystick. There are Fast, Medium, and Slow options.
      Joystick Control Direction: choose from Free and Horiz/Vert. Free enables the gimbal to be controlled in horizontal and vertical direction simultaneously. Horiz/Vert enables the gimbal to be controlled in a horizontal or vertical direction.
      Invert Pan Control: after enabling this feature, the pan axis movement direction is the reverse of the previous direction.
      Invert Tilt Control: after enabling this feature, the tilt axis movement direction is the reverse of the previous direction.
      Press M Button: switch between photo and video mode or enter/exit the quick menu. The function can be set by the user.
      Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place DJI OM 5 on a flat surface using a tripod. Do not touch the gimbal during calibration. Horizontal Gimbal Adjustment: make sure the magnetic phone clamp is level before adjusting the gimbal.
      General Settings
      Includes information such as Device Management, Device Name, Firmware Version, and Serial Number.

16. Shooting Parameters Settings
    Shooting Modes| Settings
    ---|---
    Hyperlapse| Resolution and FPS, Speed, ISO, Shutter, and EV
    Timelapse| Resolution and FPS, Video Frame Rate, ISO, Shutter, and EV
    Dynamic Zoom| Glamour Effects, Video Frame Rate, ISO, Shutter, and EV
    Slow Motion| ISO, Shutter, and EV
    Video| Glamour Effects, Video Frame Rate, ISO, Shutter, and EV
    Photos| Glamour Effects, Count Down, ISO, Shutter, and EV
    Pano| 3×3, 240°, and CloneMe Pano, Count Down, ISO, Shutter, and EV

    • When enabling Glamour Effects, the max video resolution is 1080p.
    • Shooting parameter settings vary depending on the model of the mobile phone. Refer to the Mobile Phone Compatibility List (www.dji.com/om-5/downloads) for more information.

Firmware Update

Use DJI Mimo to update the DJI OM 5 firmware. It takes approximately three minutes to complete an update.
How to Update
Before starting an update, make sure that the battery level is at least 15% (at least two battery level indicators illuminated). Connect DJI OM 5 to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions.
Do not exit DJI Mimo while updating the firmware. Pay attention to on-screen prompts. The system status indicator will blink green and red alternatively and become solid green once the firmware update has completed successfully. If an update is unsuccessful, restart DJI OM 5 and DJI Mimo, reconnect the Bluetooth, and retry.
Storage
DJI OM 5 is designed to be folded for easier storage and transportation. Make sure to fully retract the built-in extension rod and fold the OM 5 after powering off. Rotate the pan and tilt axis as shown and fold the gimbal. The mark of the axis arm should slot into the hole on the handle. Rotate the pan axis as shown.

Specifications

References

• DJI OM 5 - Master Every Shot - DJI
• DJI OM 5 - Downloads - DJI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>