ELRO AS90PLE Smart Plug User Manual

: June 6, 2024
: ELRO

Table of Contents

ELRO AS90PLE Smart Plug
Pairing the smart plug
Automatic tasks
Smart Follow
Smart Follow SOS
Specifications
DoC
Symbols
Documents / Resources

ELRO AS90PLE Smart Plug

Introduction

The smart plug can perform automatic commands. Think of lights and appliances switching automatically according to a schedule you set yourself. But you can also have connected lighting and appliances follow you when you change the status of the system. For example you turn on the alarm and with it lights and/or other devices. Think also of an intruder who is detected causing the alarm to go off and at the same time be in full light.

Pairing the smart plug

Open the app on your smartphone.
Press “Add accessories”.
Choose the “Scan QR Code” option.
Scan the QR code found on the back of the smart plug.
Give the smart plug a name.
Tap the blue check mark for agreement.
In the app, the smart plug icon appears, act as follows:
place the smart plug in a socket
press the smart plug icon in the app
the smart plug turns on, the red led around the on and off button lights up
the icon in the app turns blue to indicate that the smart plug is ON

ELRO-AS90PLE-Smart-Plug-User-FIG2

Automatic tasks

Go to the “System Settings” via the cogwheel.
Scroll down and choose “Smart Widget”.
Select the “Automatic Tasks” feature.
Press the “+” to add an assignment
Set the time that the automatic task should take place
Select the day or days that the automatic task is to be performed.
Label the automatic task with a color, for example, green for on.
Issue the command to a device, in this case the smart plug.
Choose the smart plug, currently there is only 1 namely the kitchen and select “On”.
Go back to “Add command” via the white arrow, agree with the blue “V” check mark.
The operation is successful, press OK to continue.
You will now see the label with the automatic command to power on.
Press the “+” and repeat steps 5 through 11 to make another automatic command for switching off.

Smart Follow

With the “Smart Follow” function, you can switch the smart plug when you change the status of the alarm. For example, when you turn on the system, the smart plug with lights or appliances connected to it follows. If you want to turn off the smart plug again, this command must also be programmed.

Smart Follow SOS

With the “Smart Follow SOS” function, you can switch the smartplug the moment a person is detected by, for example, a motion detector or door-window sensor when the system is switched on.

Select SOS and press the plus (+).
Currently there is no follower, press adjust.
Press the green plus to have the “smart plug Kitchen” tracked.
With the red minus (-) you can remove the smart plug from the list again.
Agree with the blue “V”.
The command is successful, hit agree
Don’t forget to program a Disarm command as well.

Specifications

Power	2400 Watt max.
Input	AC 110V-240V/50-60Hz/MAX10A
Output	AC 110V-240V/50-60Hz/MAX10A
Wireless distance	50 m
Frequency	433.92MHz
Temperature	-10°C ~ 50°C
Humidity	≤90%rh (niet condenserend)
Weight	88.7 gram
Dimension	102 x 62.5 x 29.7 mm

DoC

I, ELRO Europe, hereby declare that the radio equipment type AS90PLE conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: www.elro.eu/compliance“
Frequency: 433.9MHz
Maximum transmitting power: 13dBm

Symbols

Recycling and Disposal: The WEEE symbol means that this product and batteries must be disposed of separately from household waste. When this product reaches the end of its life, take it to a designated waste collection point nearby to ensure safe disposal or recycling. Protect environment and public health, handle natural resources responsibly!
Read the manual before use and keep it in a safe place for future use and maintenance
- Warranty visit www.elro.eu

ELRO Europe | www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam – The Netherlands