opTics LHM2-PXXX Stretch HDMI HDMI 2.0 Detachable Active Optical Cable User Manual
- June 6, 2024
- opTics
Table of Contents
- opTics LHM2-PXXX Stretch HDMI HDMI 2.0 Detachable Active Optical Cable
- Product Description
- System Requirements for Setup
- Installation
- Troubleshooting
- Maintenance
- Technical Support and Service
- Product Specifications
- Warranty Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
opTics LHM2-PXXX Stretch HDMI HDMI 2.0 Detachable Active Optical Cable
User Manual
LHM2-Pxxx
Welcome!
Product Description
Congratulations on your purchase of the Stretch HDMITM LHM2-Pxxx, Detachable Active Optical Cable for HDMI 2.0. This manual contains information that will assist you in installing and operating the product.
OPTICIS active optical HDMI 2.0 cable, LHM2-Pxxx is designed for critical display applications that demand flawless HDMI signal integrity and it provides transparent signal transmission over plenum graded, LSZH graded, or TPU hybrid cable.
It enables to deliver 4K DCI (4096×2160) at 60Hz signal up to 100m (384ft). It avoids any scaling or data compression for lessening a burden of data transmission.
LHM2-Pxxx offers perfect flexibility during installation by separating HDMI connector part and Active Optical Cable part. It gives slim, light, easy installation like a general copper HDMI cable.
LHM2-P is powered by external 5V micro USB power supply cable
Shipping Group
- LHM2-Pxxx, Active Optical Cable: One (1) unit, length as you inquire.
- 5V Micro Power Supply
- User Manual
- Optional:
- HDMI M/F to USB AM, 540mm
System Requirements for Setup
Hardware requirements
- You must have a HDMI display source (Media player, PC or laptop). It should support the maximum graphic resolution feature of Display (TV, Monitor or Projector) to be connected.
- No special requirements memory size, CPU speed and chipsets, if you’ve already properly installed your HDMI systems.
Software requirements
- No special restrictions, if you’ve already properly installed your HDMI / DVI systems.
AC/DC Power Adapter Technical Advisory
The LHM2-Pxxx is designed to use +5V internal power supplied through a HDMI pin (#18) on the graphic source port. However, LHM2-Pxxx requires USB power supply on RX side to power up.
Note that if either of Display source or Display does not support HDMI 2.0 standard, LHM2-Pxxx would not transmit HDMI 2.0 signal. Just like copper cable, transmitting information will follow lower resolution of the two.
(Example: 4K Display source – 2K Display → 2K resolution,
2K Display source – 4K Display → 2K resolution)
Warning
Do not connect micro HDMI connector, which is place on the end part of core
cable, directly to any micro HDMI receptacle other than LHM2-Pxxx body part.
Using micro HDMI connector without LHM2-Pxxx connector will damage cable
and/or HDMI devices.
Installation
Important: Please use the installation procedure below. Improper or no operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Connect both connector and cable of LHM2-Pxxx if they are not engaged with
each other.
Step 3
Power ON the body connector by using the micro USB power supply provided.
Step 4
Directly plug the TX side into the HDMI receptacle of HDMI source without
powering up of the devices.
Step 5
Plug the RX side into the HDMI receptacle of a HDMI Display.
Step 6
Power ON the device of a HDMI source and a Display.
Step 7
If the system does not work properly, go to page 1-4, trouble shooting.
Note: It is NOT recommended for customer to use any intermediate cable or
adapter between them. It may deteriorate the signal transmission performance.
Note: Do not use electric screw driver to tighten the screw. Excessive
force on screw may damage the product.
Note: Do not pull the cable with excessive force.
Note: This cable is directional cable. Please be cautious with the
direction.
Note: Do not bent the neck (strain relief) of the cable too much.
Troubleshooting
The display shows black screen.
Ensure that the HDMI ports are firmly plugged into the HDMI source and
display. Ensure that the TX and RX modules are plugged correctly to the HDMI
source and display respectively, the cable guides which side to insert.
Check if the HDMI source and display are powered on and properly booted.
Reset the system by de-plugging and re-plugging the TX HDMI port or RX HDMI
port.
Re-boot up the system while connecting the optical HDMI cable system.
Check if the cable or its jacket is not physically damaged.
Check if the cable is not bent or kinked.
Screen is distorted or displays noises.
Ensure connections of both plugs while disconnecting and reconnecting the
optical HDMI cables.
Maintenance
No special maintenance is required for the optical HDMI cables. Ensure that the cables and power modules are stored or used in a benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to Opticis.
Technical Support and Service
For commercial or general product support, contact your reseller. For technical service, contact Opticis by email techsupp@opticis.com or visit our website at www.opticis.com
Product Specifications
LHM2-Pxxx, HDMI 2.0 Detachable Active Optical Cable
-
Supports HDMI 2.0 Standards
-
Extends up to 4K (4096×2160) at 60Hz (RGB & YCbCr : 4:4:4)
-
Transmits HDMI 2.0 data up to 100m(328feet) over hybrid cable
-
Offers perfect flexibility during installation by separating HDMI connector from cable
-
Cable Options:
-LHM2-PPxx : Plenum Jacket
-LHM2-PLxx: LSZH Jacket
-LHM2-PTxx:TPU Jacket
*Note: “xx” stands for the length of the cable.
Ex: 10m of LHM2-PP → LHM2-PP10 (“A0” for 100m) -
Operates by external USB power supply on the display(RX) side
-
Provides USB power on display source(TX) side for insufficient power supply(optional)
-
Supports 3D contents transmission
-
Complies with CEC, EDID and HDCP 2.2
-
Supports HDR at 10 bit or 12 bit speeds respectively within its maximum bandwidth, 18Gbps
-
Tensile load: 500N
Minimum bending radius: 6mm
Outer diameter of cable: 3.4mm (±0.2) -
Mechanical specifications of TX and RX module parts
Dimensions: 71.7mm / 24.2mm / 10.1mm (L/W/H) -
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: – 30°C to 70°C
Operating humidity: 5% to 85% -
Certifications: CE / FCC
Warranty Information
1 (One) Year Warranty
Opticis warrants this optical HDMI extension cable to be free from defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of purchase from Opticis or its authorized resellers.
If a product does not work as warranted during the applicable warranty period, Opticis shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) days warranty or the reminder of the initial warranty period, whichever is longer.
Opticis shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to Opticis for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the Product in the
application for which said Product is intended.
Dispose of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
© 2021 Opticis Co., Ltd. All Rights Reserved
Revision 1.1 Oct 2021
Opticis Locations
OPTICIS HQ
Opticis Co., Ltd.
3F, 305, Sanseong-daero
Sujeong-gu, Seongnam-si
Gyeonggi-do, 13354
South Korea
Tel: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site www.opticis.com or
contact techsupp@opticis.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>