MICRO-LIGHT OPTICS L1 Ultra Illuminance Spectrophotometer Instruction Manual

MICRO-LIGHT OPTICS L1 Ultra Illuminance Spectrophotometer

Appearance Description

button instruction

• Power on : Long press to power on.
• Power off: Long press to power off.
• Measure : Short press to measure.
• Hibernate : Short press to wake up.

HOME PAGE

• After the instrument is started, the logo page appears first, and the home page is displayed after the loading is complete.
• Each measurement item is arranged on the home page, and the test details page is arranged according to the order of the measurement items on the home page. You can also customize the order of the test items according to your usual testing habits, long press the icon of the test item and drag it.

Measurement page

• After selecting the measurement item, it will jump to the corresponding measurement page, then click the measurement button and the instrument will start to measure. When the drawing bar at the bottom of the page is all blue, ithe measurement is completed, and the test result will be displayed on the interface. You can also scroll left and right to see different measurement items. During the measurement process, you can also press the pause button to end the measurement.

• Test data is a scrolling page, you can swipe up and down the scroll bar on the right side of the screen to view the specific test results.
• Color quality scale: Fifteen saturated colors are evenly distributed in the visible spectrum to more accurately analyze the light source Color quality.
  • TLCI
  • Rank distribution:
  • Level 1: 85-100;
  • Level 2: 75-85;
  • Level 3: 50-75;
  • Level 4: 25-50;
  • Level 5: 0-250
  • Gamut area index
  • TM-30-18 Rf:
  • TM-30-18 Rg

• The color rendering index shows Ra and Re. Ra indicates the average value of R1-R8, and Re indicates the average value of R1-R15.

• CIE coordinates page, you can view CIE-1931, CIE-1960, CIE-1976, three standard coordinate values.On the coordinate chart, you can view the coordinate point position of the corresponding coordinate value.

• The two measurement items of color tolerance and color specification can select the corresponding color temperature interval according to the actual color temperature data to view the diagram, or select multiple or all color temperature intervals to view the diagram.

• The basic parameters section of the plant lighting measurement project is a scrolling page, you can swipe up and down the scroll bar on the right side of the screen to view the specific test results.

• Plant lighting measurement project, in addition to the basic, there is a custom band range for customers to set according to the actual measurement needs. Specific setting path: set options — measurement Settings — wavelength Settings — wavelength range, and then manually enter the band value.

• On the stroboscopic page, you can view parameters such as stroboscopic frequency, stroboscopic percentage, SVM, and risk level. In single measurement mode, only the illuminance value is displayed, and the maximum, minimum and average values are not displayed. In continuous measurement mode, the current illumination value is displayed in real time, as well as the maximum, minimum and average value of the current test period.

Compare

Click the “Select Data” button to jump to the page of saved data records. Select two sets of data for comparison. After both sets of data are selected, the interface will display the comparison result. You can swipe left and right to view comparison parameters.

Record

On the Data record page, you can view the saved test data and delete it by selecting one, multiple, or all. After clicking the delete icon on the page, the system will prompt you again whether to delete the data. If you confirm the deletion, click “f”; if you Cancel the deletion, click “X”.

Setting page

1. Measuring Mode
   You can choose a single measurement mode, click the measurement button once to test a set of data; continuous measurement mode can also be selected click the measurement button to start the continuous measurement, click the pause button to stop the measurement.

2. Integral Mode
   By default, the instrument uses automatic integration mode, and the instrument automatically adjusts the integration time according to the intensity of the light source being measured. If you have special measurement needs, you can use manual integration mode.

3. Wavelength Range Setting
   The wavelength range of photon flux and irradiance can be set according to the actual measurement requirements.

4. Information Setting
   Set the company name, address, telephone, fax, you can also upload the company logo, click “save” after the completion of the setting, these information will be reflected in the generated measurement report.

5. Power Settings
   • Start the sleep mode: set the automatic sleep time. After reaching the set time, if there is no operation the instrument enters the sleep state, press \ the measurement button to wake up the instrument.
   • Turn off sleep mode: When the device is turned on, steady on screen.

6. Brightness Setting
   Drag the circular icon left and right to adjust the brightness of the screen.

7. Volume setting
   You can choose to turn sound effects on or off, or drag the circular icon left and right to adjust the volume.

8. Bluetooth Settings
   Turn on the Bluetooth of the instrument, search for the mobile phone that needs to transfer files, and then connect.

9. Wifi Setting
   Turn on the instrument wifi network and connect to a wireless network that can be used for file transfer.

10. Language selection
    Three languages are available: Simplified Chinese, Traditional Chinese and English.

11. Date and time
    You can select the corresponding time zone to allow the system to set the time automatically, or disable the automatic setting and set the current time manually.

12. About Us
    On this page, you can customize the name of the instrument. The name of the instrument will be displayed synchronously when the Bluetooth connection is connected to the PC. You can also view the instrument model, software version number, instrument serial number, and our contact information.

Operating Instructions

Operating button

•  Click this button in any interface to return to the main page.
•  Click the button on the test page to save the current test data, manually enter the name of the document, and the saved data can be viewed on the data record page.
•  Measurement button, in single measurement mode, click to measure one data at a time, in continuous measurement mode, click once to start continuous measurement data.
•  Pause button. In continuous measurement mode, click to pause the measurement.
•  Select All button to select all saved test data.
•  Delete button to delete the currently selected test data.
•  Click Data transfer on the test page, you can generate the current test data into a PDF report, and then transfer it via Bluetooth or email. Fill in the detailed information on the transfer preparation page, which will be synchronized to the PDF report. If you choose email transmission, you need to open and connect to the wifi first, and then enter the correct email address; If you choose Bluetooth transmission, you need to turn on and connect the Bluetooth device first, and then transfer.

Operating Instructions

Test report

PC Software

The instrument is equipped with PC software, the instrument is connected to the computer through the TypeC data cable, the instrument can be controlled by the PC software for measurement, the data saved in the instrument can also be imported to the PC software for viewing, and the test report can be generated.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference th at may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s aut hority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ABOUT COMPANY

• Micro-Light Optics Co., Ltd
• +86-510-81807191 ~ 2
• sales@microlight-optics.com
• www.microlight-optics.com
• 8 400-878-6665

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>