WILLIAM OPTICS RedCat 51 II Petzval Apo Refractor Telescope User Guide
- May 15, 2024
- WILLIAM OPTICS
Table of Contents
WILLIAM OPTICS RedCat 51 II Petzval Apo Refractor Telescope
PARTS
- A. Rotator Tension Knob
- B. Focus
- C. Focus Tensioner/Lock
- D. Lens Hood
- E. M48 Dust Cap/Thread
- F. Mounting Ring
- G. Mounting Ring Knob
- H. Arca Swiss/Vixen Plate
- I. Tilt Adapter
GET STARTED
Lens Hood/Dew Shield
The [D] Lens Hood on the Redcat is convertible for storage. Which it has to be
inverted before use. Remove the cat logo lens cap first, unscrew the hood from
the body then reinstall it outward firmly.
Camera adapter
Remove part [E] M48 Dust Cap from the Redcat, make sure the [A] rotator
tension knob is tightened then attach the T-Mount that is compatible for your
Camera or CCD.
Rotator
Loosen the Rotator Knob part [A] to set the camera to the desired angle.
Please make sure the camera mount is tightened before this step.
Base Mounting Options
Mounting Plate (H] can be inverted for two types of mount, Arca Swiss or
Vixen. Remove the screw on the bottom of the Mounting Ring, flip it over to
change the mount type, or slide forward/backward to change the balance
position. The default is to Vixen.
ACCESSORIES
Camera Mount
- Canon / Nikon / Sony a /
- Fuji / Pentax / Micro 4/3
Cinematography
Visual
Documents / Resources
|
WILLIAM OPTICS RedCat 51 II Petzval Apo Refractor
Telescope
[pdf] User Guide
RedCat 51 II Petzval Apo Refractor Telescope, RedCat 51 II, Petzval Apo
Refractor Telescope, Apo Refractor Telescope, Refractor Telescope, Telescope
---|---