e-Ruler Endodontic File Measuring Ruler Instructions
- June 6, 2024
- e-Ruler
Table of Contents
Instructions For Use
The e-Ruler dental device is used by to measure files and instruments used
during endodontic procedures. This compact ruler is independently worn on the
finger of dental professional while performing an endodontic procedure.
A. Before assembly, choose one of three available ring sizes (small,
medium or large) that best fits your index finger. Slide the selected ring
into the ruler channel located underneath. To secure the locking mechanism,
press the ring and ruler against a flat surface. The ring will be permanently
attached to ruler. Do NOT attempt to remove.
B. When using rubber stops, utilize the stop locks on the
ruler (only on Stop-Lock version) to increase or decrease the instrument’s
working length. The ruler performs well with paper points, gutta percha and
many other endodontic instruments.
PROCESSING INSTRUCTIONS
Precleaning Instructions: Rinse the e-Ruler under tap water to remove
gross and visible soils. Use a scrub brush if necessary to remove visible
soils. Place the e-Ruler in an ultrasonic bath with only an enzymatic
detergent prepared to the manufactures directions. Fully immerse the item
and soak for 1 minute. Then sonicate the e-Ruler for 5 minutes and remove and
rinse for 15 seconds with tap water. Inspect for any soils and repeat if any
soils are visible.
Steam Autoclave Processing Instructions: Place the e-Ruler in an FDA
approved or ISO 11607 compliant autoclave pouch/bag. During steam autoclave
processing, place all components near center of the chamber. Do not exceed
temperature of 275°F (135°C). (1805)
| Gravity Displacement Autoclave| Pre-Vacuum Autoclave
---|---|---
Temperature| 121°C (250°F)| 132°C (270°F)
Process Time| 30 minutes| 4 minutes
Drying Time| 30 minutes| 20 minutes
Warning: After multiple uses, if any component of the e-Ruler demonstrates
cracking, fractures or any loss of integrity dispose and replace with a new
e-Ruler.
Warning: Do not place any components into Surgical Milk, “cold sterilizing
solutions” or instrument dips prior to autoclave processing. Only use
enzymatic ultrasonic detergents when precleaning the EndoRing cup and the
metal ruler in ultrasonic cleaners. Report any serious incident with this
device to Jordco Corporation and the governing medical device authorities in
your country. (2006)
Symbols Glossary Available at:
www.jordco.com/symbols
Jordco products are covered by one or more U.S. or foreign patents or patent
applications owned by Jordco, Inc. of Beaverton, OR, USA. See
www.jordco.com for details. JORDCO, ENDORING, E-FOAM,
ENDOGEL, E-DX, and FILECADDY are trademarks of Jordco, Inc., registered in the
United States and/or other countries. The blue color of the e-Foam inserts and
the endodontic organizer, the yellow color of the e-Foam inserts, and the
colors yellow and blue-yellow together on e-Foam insert packaging, are all
trademarks of Jordco, Inc., registered in the United States. See the above
website for further information. (1704)
e-Ruler™ both Stop Lock & No-Stop Lock versions
Please read before using the e-Ruler.
Jordco, Incorporated
Beaverton, Oregon USA 97006
503/531-3904 TEL, 503/531-3757 FAX, 800/752-2812 toll free USA
www.jordco.com
Before assembly, choose one of three available ring sizes (small,
medium and large) that best fits your index finger.
Slide the selected ring into the ruler channel located underneath.
To secure locking mechanism, press ring and ruler against flat surface. Ring
will be permanently attached to ruler—do NOT attempt to remove.
When using rubber stops, utilize the stop locks on the ruler (only
on Stop Lock version) to increase or decrease the instrument’s working length.
The ruler performs well with paper points, gutta percha and many other
endodontic instruments.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>