MultiClean™ Allergen Pet Lift-Off® & Non Lift-Off Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
-
Release the Separator by twisting to the left to disconnect & remove
- Clean Separator of all debris
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Open the Tank Lid > Lift up on the release latch on the front
- Remove Filter and clear debris (machine should not be used without Filters installed)
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Insert the thin Flat Filter (with the white tab) first > Then the Foam Filter
-
You should hear a click when the Tank Lid is securely closed
-
The Post Motor Filter is located below the Dirt Tank
- Press down on tab to remove Filter Cover
- Press tab on right side of Filter > Remove Filter > Remove debris (machine should not be used without Filters installed)
- This pleated Filter is not washable
- For optimal performance replace the Post Motor Filter every 6 months
-
When reattaching Post Motor Filter > Insert left side first then lock the right side into place
- Reattach Filter Cover
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>