normann COPENHAGEN Amp Lamp Large EU Smoke-Black Table Lamp Instruction Manual
- October 30, 2023
- normann COPENHAGEN
Table of Contents
normann COPENHAGEN Amp Lamp Large EU Smoke-Black Table Lamp
Product Information
The product being discussed in the user manual is an Amp, which includes three different models: Amp Pendant large, Amp Pendant small, and Amp Table Lamp. The user manual provides assembly instructions for each model. It is important to shut off power to the circuit before starting installation work. In some countries, electrical installation work can only be carried out by an authorized electrical contractor.
General Instructions
Please note the information contained in these instructions and save this manual, also when the lamp is already mounted.
IMPORTANT Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by an authorised electrical contractor. Contact your local electricity authority for advice.
Safety precautions
- Electrical connections may only be carried out by qualified staff.
- The manufactures do not accept responsibility for injuries or defects caused by improper use of this lamp.
- Attention! Before starting the installation, disconnect the power by turning off the circuit breaker, or by removing the fuse at the fuse box.
- Mind to use this lamp for its predetermined function. For example don’t mount indoor lamps in outdoor areas.
- Please check all components are complete before installing.
- Don’t cover the lamp.
- Don’t connect the lamp to power and don’t switch it on when it’s in packing.
- Bulbs and transformers get very hot during operating. At improper use there is the risk of fire and by changing the bulb you can hurt yourself. Always let cool down!
- If the external flexible cable or cord is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Please ensure that the specified bulb type and power of bulb is used. The maximal wattage shouldn’t be exceeded (find the bulb symbol and the “max … W” on rating label or on lamp).
- Do not mount the lamp on wet or conducting background.
- Make sure that the cables or cords don’t get damaged during installation.
- The given main voltage (220-240V ~ 50/60Hz) shall not be exceeded.
- Plug and connection elements must be free of tensile strength and torsion force.
- Don’t touch bulbs with bare hands.
- If the product is damaged, please contact Normann Copenhagen for replacements.
Maintenance instructions:
- Before cleaning, disconnect the power by turning off the circuit breaker, or by removing the fuse at the fuse box.
- Mind to clean the surfaces of lamp only.
- Wetness shouldn’t get in terminal box or to any conducting part.
- Before you start to clean let it cool down for 10 minutes!
- Cleaning with a soft dry cloth only.
Assembly Instructions Amp
Amp Pendant large
Place the included cardboard piece between the socket and the lampshade to
prevent it from any damage while inserting the bulb.
Amp Pendant small
Amp Table Lamp
Advice for environmental care:
Please don’t dispose of this article in normal domestic waste after the end of its lifecycle. Instead, we advise that you dispose of it according to local environmental laws for waste disposal. The materials are recyclable according to their specifications. With the correct recycling of these materials, you can make a significant contribution to environmental protection. Ask your local authority for next staging area.
CE marking: By affixing the CE marking to a product, a manufacturer declares that the product meets all the legal requirements for CE marking and can be sold throughout the European Economic Area (EEA).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>