buzztv XRS4900 4K UHD Android 9 Set Top Box User Manual
- June 5, 2024
- buzztv
Table of Contents
XRS 4900
USER MANUAL
REDEFINING TV
PACKAGE CONTENTS
CONNECTION
AV Connection
a. Connect the AV cable of the 3 colors (red/ white/yellow) to the XRS4900’s
AV output interface. and the other end to the TV’s AV input interface. The
connection can be made by color.
b. Power on the XRS4900. Set the TV video mode to AV input.
HD1V Connection
a. Connect the HDMI cable to the XRS4900’s output interface. and the other end
to the 1V’s HDMI input interface
b. Power on the XRS4900. Set the 1V video mode to HD1V input TheAdoptad
Trademarks registered trademarks of
INSTALLATION STEPS
- Connect XRS4900 TV Box to the power supply.
- Connect XRS4900 to your TV with an HDMI cable or AV Cable.
- For a wired connection, plug-in an Ethernet cable from the N Box to your modem For wireless, choose your Wi-Fi network and input your Wi-Fi password
TROUBLESHOOTING
Warning: Under no circumstances should you try to repair the XRS4900
yourself. like this, we invalidate the warranty
Do not open 1t as there 1s a risk of electrical shock. If any fault occurs.
please the first check’Mth this t1Dubleshoot1ng checklist. If you are unable
to remedy a problem by following this guide, contact your dealer for help.
Problem
|
Solution
---|---
No Power| • Check rt the miser adapter e property connected to the power
and the IV bee
• Press the power on the remote controller to turn on the power
No Picture| • Re-Connect the HDTV cable or AV cable
• Check if the TV is powered on
NO sound a stored sound| • Ajut the volume
• Check that the speakers are connected correctly
The IV bat does not respond tote remote conga| • Am the remote control
directly at the sensor on defiant of the IV box
• Reduce the distance to the nr bOx
• Repace batteries in the rem to control
• Pots 007 of system Crash disconnect and reconnected the power super.
No soot Silt g payback| • The audio codec may not be supported by the
IV box
• Check the volume
The cone its C4 de Mita flash drive carrot be read| • The LISB Or flash
drive format 6 is not comparable with the box
• if one of the USBs can rot be reacted please turn Off the 1V 00x for 30
seconds and restart the 7V box
Sow operation of the USB flash drive| • Lar¢ Me Si tea hi m resolution
USB flash drive takes longer time to read and display on the W screen
The TV screen is dark and the player LED is loCrikkig| • Turn off the
IV boot wat 30 seconds and am on again
• Check111-1DIV connect in is correct or try chancing the HMV cab
REMOTE ＋ 5 BUTTON LIST
Learning Remote Feature
Learning methods please see as below
Learning Remote Feature
Learning methods please see as below:
- Long press the “TV Power” + “Source” keys on the RCU at the same time for 3 seconds until the Blue LED turns solid Blue The RCU has now entered learning mode.
- Press the <ey on the RCU to be programmed, for example, the “TV Power” Key, the Blue LED will start blinking.
- Aim the TV RCU that you want to learn from towards the front of the RCU (Distance less than 3cm). Press the button on the TV RCU that you want the BT-100 RCU remote to learn from. If the BT100 RCU has been programmed correctly the Blue LED on the BT-100 \ RCU will Nit* 3 times then turn solid Blue? This will indicate that you have programmed it properly.
- Repeat Steps 2-3 for the ‘Source” button. 5. Short press the “TV Power” key + “Source” key at the same time on the BT-100 RCU to exit the learning remote.
SATA DRIVE (Optional)
Installing SATA Drive.
- Remove bottom plate (A).
- Orientate the 2.5 SATA connectors (B) to the corresponding connector on the XRS4900 and attach.
- Replace the bottom plate.
LIGHTS & INDICATORS
Lighting on the Front of XRS4900 indicates the following:
PAIRING RCU (REMOTE) AND XRS4900
How to put RCU into Pairing Mode for BT
Press “OK” + “VOL – for 3 seconds until the Red LED “breathing on”. RCU enters pairing mode. The device’s name is BuzzTV BT-100. You will need to have the STB searching for BT in order to fully pair the remote.
How to turn the Backlit Feature On/Off
Long press the blue button on the bottom right of the remote for 5+ seconds. This will turn the backlit feature on/off (illuminates for approximately 5 seconds when or
WARRANTY INFORMATION
For warranty information and registration, please visit: www.buzztv.com/register
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. In the United States and other countries.
www.buzztv.com/support
cs@buzztv.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>