TELESIN T10 Remote Controller User Guide

TELESIN T10 Remote Controller User Guide

Overview

LCD Display

Button

Shutter/Select Button
1s Short Press
Shoot photo, turn on/off recording
3s Long Press Enter phone pairing mode, only photo function in phone mode, Bluetooth name is ‘T-10″

Star Button
When in the three main modes ‘Video”, `Photo”, “Time-lapse” Set the current main mode to ‘Quick mode’ Enter the main mode ear responding to the “Quick mode

Mode Button [Power/Mode Switching
2s Long press
Power On
3s long press
Power Off
1s Short press
Mode Switching
(After pairing. you can control the camera on and of)

Setting Button (Pairing, small mode switching)
1s short press
The camera switches between the normal sub-modes of the main mode.
(The sub-modes of different camera models are different and cannot be standardized)

Pairing

Setting Button
3s Long Press
The remote control enters pairing mode, and the Bluetooth indicator flashes

Camera Setting
Select connections > Connected Device > Remote control put the Camera into Pairing mode wait for a successful pairing message to appear on the camera screen

If the pairing fails, select Reset Connection in the camera setting and repeat the process.

If the camera has already been paired,you don’t need to pair it again when you connect the remote control next time, just make sure the wireless Connection of the camera has been turned on, and it will be connected automatically after a few moments. When the camera Es not used fora long time, the wit connection may be turned off completely so please unplug the camera battery and plug It back In to activate the wireless connection.

Pair Up 5

1. Camera mode
   In the state of the first camera connected, long press the pairing button 3 seconds remote control Bluetooth Indicator flashing you can connect the second camera and so on, the maximum number of connected 5.

2. Status Display
   The display status of the first camera connected

3. Power On/OFF

   • All the connected camera can be controlled at the same time to (Shutdown)
   • Only the first connected camera can remain connected in the shutdown state
   • The first connected camera can be  controlled to (Power on)
   • Connecting the next four camera requires the previous steps to be performed again.

Charging

Plug the charging cable into the charging slot. connect the other and of the cable a computer or other USB power source.

Charging Time 2.5h
Usage Time 10h

 Please keep the charging device away from metal object to prevent fire caused by short circuit.

When Charging the screen lights up and the power indicator starts to work

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>