MONOGRAM ZK3SN369VLH Stainless Steel Door Panel Kit Instruction Manual
- June 12, 2024
- MONOGRAM
Table of Contents
MONOGRAM ZK3SN369VLH Stainless Steel Door Panel Kit
Product Information
The Stainless Steel Door Panel Kit is designed for the installation of stainless steel door panels and toe kicks on compatible appliances. The kit includes various components such as top door panels, middle drawer panel, bottom drawer panel, toe kick, and screws. There are different options available for single door and French door configurations, as well as different handle kits.
Components Included:
- 1 Stainless Steel Top Door Panel (Single Door Kit)
- 1 Stainless Steel Right Top Door Panel (French Door Kit)
- 1 Stainless Steel Left Top Door Panel (French Door Kit)
- 1 Stainless Steel Middle Drawer Panel
- 1 Stainless Steel Bottom Drawer Panel
- 1 Stainless Steel Toe Kick
- 48 M4 Phillips Screws
Tools and Materials Required:
- Phillips #2 bit/driver
- M4, M5 hex keys or bits/drivers (included with unit)
Product Usage Instructions
Panel Prep
- Locate the panel brackets in the convertible (middle) drawer of the refrigerator.
- Using the M4 machine screws provided with the stainless steel door panel kit, install the brackets onto the appliance. Do not tighten the screws at this stage.
- If applicable, install the Monogram Statement or Minimalist handles (sold separately) following the instructions provided in the handle kit.
Top Panel Installation
- Position the top door panel onto the appliance, aligning the brackets with the corresponding holes.
- Secure the panel in place using the provided screws.
Middle Panel Installation
- Attach the middle drawer panel to the appliance, aligning it with the brackets and holes.
- Secure the panel using the provided screws.
Bottom Panel Installation
- Install the bottom drawer panel onto the appliance, aligning it with the brackets and holes.
- Secure the panel using the provided screws.
Toe Kick Installation
- Attach the stainless steel toe kick to the bottom of the appliance.
- Secure it in place using the provided screws.
Note : For detailed instructions on cabinet dimensions, trim assembly, and door stop angle, refer to the installation instructions provided in the user manual.
Installation Instructions
Before you begin – Read these instructions completely and carefully.
- Note to Installer: Be sure to leave these instructions with the Consumer.
- Note to Consumer: Keep these instructions with your Installation Instructions for future reference.
WARNING
Tip Over Hazard.
These appliances are top heavy, especially with any doors open, and must be
secured to prevent tipping for-ward which could result in death or serious
injury. Read and follow the entire installation instructions for securing the
appliance with the anti-tip system before installing door panel kit.
WARNING
Door Trim Pinch Point Hazard
Improper installation can lead to a finger pinch point haz-ard between the
side door trim and the cabinets when operating the door, especially with
children. To minimize this risk you must follow the installation instructions
for cabinet dimensions, trim assembly, and door stop angle.
This kit provides for the installation of the Stainless Steel Door Panel Assemblies and Stainless Steel Toe Kicks
| ZK3SN364VRH | Single Door Right-Hand Stainless Steel Door Panel Kit |
|---|---|
| ZK3SN369VLH | Single Door Left-Hand Stainless Steel Door Panel Kit |
| ZK4SN360VSS | French Door Stainless Steel Door Panel Kit |
| ZKSB3H3CVSS | Single Door Minimalist Handle Kit |
| ZKSB3H3PVSS | Single Door Statement Handle Kit |
| ZKSB4H4CVSS | French Door Minimalist Handle Kit |
| ZKSB4H4PVSS | French Door Statement Handle Kit |
Tools and Materials Required
- Phillips #2 bit/driver, M4, M5 hex keys (included with unit) or bits/drivers.
PANEL PREP
- Panel brackets are shipped with the refrigerator in the convertible (middle) drawer. Use the M4 machine screws provided with the stainless steel door panel kit to install brackets. Do not tighten screws.
- Install Monogram Statement or Minimalist handles (sold separately). Follow instructions provided in the handle kit.
TOE KICK INSTALLATION
- This kit provides a stainless steel toe kick for a single, integrated unit installation. Refer to the unit installation instructions for information on custom toe kicks and stainless steel standard and dual installation toe kicks.
- The toe kick attaches to the refrigerator by using a magnet that is provided with the refrigerator.
- Remove the toe kick magnet from the front access cover
- Adhere magnet to back side of toe kick. The surface of the toe kick where the magnet is to be placed must be clean and free of foreign material. Center magnet vertically and horizontally.
- Position toe kick on bottom portion of the front access cover.
Instructions for this kit are also included in the full installation
instructions included with the unit.
For the full owner’s manual, visit our website at
monogram.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>