LeapFrog LF2513 Pan And Tilt Video Monitor User Guide

2.8” Pan & Tilt Video Monitor
LF2513
LF2513-2

LF2513 Pan And Tilt Video Monitor

Parent Guide
This guide contains important information.
Please keep it for future reference.
Need help?
Visit leapfrog.com/support

Visit our website leapfrog.com leapfrog.com for more information about products, downloads, resources and more.
Read our complete warranty policy online at leapfrog.com/warranty.

Scan the QR code to enter our Online Manual:Or go to leapfrog.com/support

Important Safety Instructions

The applied nameplate is located at the bottom of the Baby Unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the Baby Unit at a height above 2 meters.

4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to a bath, sink, swimming pool or shower.

7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the Parent Unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal.

8. Use only the power adapters included with this product.
   Incorrect power adapter polarity or voltage can seriously damage the product.
   Power adapter information:
   Baby Unit Output: 5V DC 1A;
   VTech Telecommunications Ltd.; Model: VT05EUS05100
   Parent Unit Output: 5V DC 1A;
   VTech Telecommunications Ltd.; Model: VT05EUS05100
   Rechargeable battery information:
   Zhongshan Tianmao Battery Co. Ltd
   Li-ion battery, 3.8V 2100mAh 7.98Wh; Model: BP1763

9. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, underthe-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet should be installed near the equipment and should be easily accessible.

11. Unplug this product from the wall outlet before cleaning.

12. Do not modify the power adapters or replace with other adapters, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.

14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or electricity supply provider.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source.

18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.

19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorised service facility.
    Disassembling or removing parts of the product other than via the battery door may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.

20. You should test the sound reception every time you turn on the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you are not intending to use it for some time.

23. Children should be supervised to ensure that they do not play with the product.

24. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.

25. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between 32 °F (0 °C) and 104°F (40°C).
2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
4. Mishandling batteries can cause burn, fire or explosion hazards.
5. Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children. Do not remove warning label on the adapter cord.
6. Never place the Baby Unit(s) inside the baby’s crib or playpen. Never cover the Baby Unit(s) or Parent Unit with anything such as a towel or a blanket.
7. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the pacemaker.
• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
  WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)
This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

What’s Included

Cable Management

Connect, Charge and Power On the Baby Monitor

1. Connect the Baby Monitor
2. Charge the Parent Unit Battery

Notes:

• Before using the baby monitor for the first time, charge the Parent Unit battery for 12 hours.
  When the Parent Unit battery is fully charged, the battery icon becomes solid .

• The standby time varies depending on your actual usage time and the age of the battery.

The battery icon on the screen indicates the battery status:

minutes).
The battery icon becomes solid .| The battery is fully charged.| To keep the battery charged, connect it to AC power when in use.

3. Power On or Off the Baby Monitor

1. Connect the power adapter to the Baby Unit and a power supply to power on the unit.
   Disconnect from the power supply to power off.

2. Press and hold until the welcome screen appears. The green LINK LED light flashes.

4. Status Check
Once your Baby Unit and Parent Unit are powered on and connected, your Parent Unit displays video from Baby Unit, and the LINK LED lights steadily.

5. Positioning the Baby Monitor

Caution:
Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen.

Caution:
The default volume of your Parent Unit is level 3, and the maximum volume is level 5. If you experience feedback noise from your baby monitor while positioning:
– Make sure your Baby Unit and Parent Unit are more than 3 feet (1 meter) apart,
OR
– Lower the volume of your Parent Unit.

Note:
To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, mobile phones and computers.

Overview

Parent Unit

1. Link LED light
2. Power / LCD Off
3. Menu / Select
4. Arrow Keys
5. Battery LED light
6. Talk / Return
7. Microphone
8. RESET
9. Stand
10. Speaker
11. Power jack

Baby Unit

1. Light sensor

2. Camera

3. Infrared LEDs

4. Microphone

5. Night light

6. Night light control key
   • Press to turn the night light on or off.

7. Speaker

8. Temperature sensor

9. Power jack

10. Wall mount holes

11. PAIR
    • The Parent Un i t and Baby Unit provided are already paired.

Parent Unit icons

Main Menu Icons
Volume

Adjust the Parent Unit volume.

General Settings

| Adjust screen brightness.
---|---
Screen off timer
• Select the screen off time. • Adjust VOX (sound level) to activate the screen.

Temperature

| Turn on/off temperature Alert.
---|---
Select the minimum and maximum temperature range.
Temperature display format

Lullaby

| Select to play 2 melodies, 2 soothing sounds or stop the lullaby.
---|---
Set the lullaby volume.

Night Light

| Turn on/off night light.
---|---
Turn on/off auto brightness.
Set the Timer or auto-on when sound detected.
Select from 7 night light colors or auto-color change.

Monitoring mode (For LF2513-2 only)

| Select a camera view.
---|---
Select the patrol mode.

Status icon

| Connection status
---|---
| Baby unit 1 and 2 are being viewed in Patrol mode (For LF2513-2 only).
| Current view status
• The baby unit number that is being viewed.
| Night light is turned on.
| Auto-on night light is turned on.
| Zoom is turned on.
| Night vision is turned on.
| Melodies and soothing sounds are playing.
| Talkback is on.
| Sound level indicator
| Parent unit is muted.
| Temperature
| Battery indicator

The RBRC seal
The RBRC seal on the Li-ion battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used Li-ion batteries into the trash or municipal waste, which may be illegal in your area.
VTech’s participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Li-ion battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.

California Energy Commission battery charging testing mode
This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy- conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the Parent Unit is paired to Baby Units, the CEC battery charging testing mode is activated while it is powered off and charging.

Disclaimer and Limitation of Liability
LeapFrog and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. LeapFrog and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. LeapFrog and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect against data loss.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warranty: Please visit our website at leapfrog.com for full details of the warranty provided in your country.

FCC and IC regulations

FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The Baby Unit shall be installed and used such that parts of all persons’ body are maintained at a distance of approximately 8 in (20 cm) or more. The transmitter and antenna of the Parent Unit shall be held at least 1 in (2.5 cm) from your face.
This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B)
Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term ‘’IC:‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
RF radiation exposure statement
The product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Baby Unit should be installed and operated with a minimum distance of 8 in (20 cm) between the Baby Unit and all persons’ body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This equipment complies also with Industry Canada RSS-102 with respect to Canada’s Health Code 6 for Exposure of Humans to RF Fields.

Online Manual

Find the answer to your question on our knowledge-rich Online Manual. Get assisted at your own pace and learn what your monitor is capable of.

Scan the QR code to access the Online Manual or visit leapfrog.com/support.

Full Manual
Comprehensive help articles on product set up, operations and settings.
Video Tutorials
Walk-throughs on features and installation.
FAQs & Troubleshooting
Answers to the most commonly asked questions, including troubleshooting solutions.

Customer Support
Visit our Consumer Support website 24 hours a day at:
United States: leapfrog.com/support
Canada: leapfrog.ca/support

Call our Customer Service number from Monday to Friday 9am – 6pm Central Time:
United States & Canada: 1 800-717-6031

Warranty
Please visit our website at leapfrog.com for full details of the warranty provided in your country.

Technical Specifications

Parent unit: 2405 – 2475 MHz
LCD| 2.8” Color LCD (QVGA 320×240 pixel)
Nominal effective range| Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.
Power requirements| Parent unit: 3.8V, 2100mAh Li-ion, 7.98Wh Li-ion battery
Baby unit power adapter: Output: 5V DC @ 1A
Parent unit power adapter: Output: 5V DC @ 1A

Specifications are subject to change without notice.
© 2023 LeapFrog Enterprises, Inc.
a subsidiary of VTech Holdings Limited.
All rights reserved. 05/23. LF2513_QSG_US_V3

References

• LeapFrog Customer Support | Help & Support For LeapFrog Products
• LeapFrog Customer Support | Help & Support For LeapFrog Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>