saphe 1002 MC Traffic Alarm User Guide
- June 6, 2024
- saphe
Table of Contents
quick guide
GETTING STARTED
Download the Saphe Link app.
Make sure Bluetooth is enabled on your phone. Then open the Saphe Link app.
Turn on Saphe MC by pressing the button for 5 seconds – the LED light will
turn green. When turned on, the LED will flash red.
Find ‘Devices’ in the Saphe Link menu. Press Saphe MC under ‘Unknown devices’
to pair.
STARTING UR
Saphe MC will beep twice if connected correctly.
ALARMS
A warning tone will indicate a speed camera or danger on the road
TURN OFF
To turn off Saphe MC, press and hold the button for 5 seconds. The button will turn red when pressed.
DISCONNECTED
If Saphe MC fails to connect within 30 seconds after starting your trip, a tone will alert you.
INSTALLATION
Secure Saphe MC inside the helmet, with the tape.
SUPPORT
If you need help try our support website: saphe.com/support/
CHECKLIST
To ensure the best experience with the Saphe MC, you can use the following steps as a checklist.
- Always bring your smartphone.
- Saphe MC and your smartphone are connected correctly through the Saphe Link app.
- Bluetooth is enabled on your smartphone.
- Location settings for Saphe Link app is set to ‘Always turned on.
- Your smartphone is recently updated.
- Placing your smartphone in a purse or in your pocket could block the GPS signal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>