Saphe 5059 Drive Pro Traffic Alarm User Guide
- June 12, 2024
- saphe
Table of Contents
Saphe 5059 Drive Pro Traffic Alarm
Product Information
The Saphe is a device designed to improve traffic safety by providing real- time alerts for dangers and mobile speed cameras. It requires the Saphe Link app and user registration for full functionality. The device can be easily installed in different locations in your vehicle, such as the windshield, dashboard, or air vent. It comes with two different mounts and a holder.
Product Usage Instructions
- Download the Saphe Link app from your app store.
- Register as a user at www.club.saphe.com or in the Saphe Link app.
- To turn on the device, press and hold the red button for 3 seconds.
- Pair your device with the Saphe Link app by going to ‘Menu’ > ‘Devices’ > ‘Unknown device’ and selecting your ‘Saphe Drive Pro’. Do not pair it from your phone’s Bluetooth settings.
- Due to environmental reasons we have decided not to include a micro USB cable as this is common in most households.
- Press the red button to report a danger and the blue button to report a mobile speed camera. Seconday reports are available by holding one of the buttons, until the display changes after 2 sec. The seconday report may be different depending on country of purchase.
- When an alarm can be confirmed , a miniature red/ blue button + check-mark, will be displayed below the alarm icon. Confirm the alarm by pressing either the red or blue button depending on the alarm type.
- Choose the appropriate mount and install the device by sliding the holder onto one of the mounts and placing the device on it. Make sure it locks and is securely fastened.
- Note that the air vent mount needs to be purchased separately.
- To report a danger, press the red button. To report a mobilespeed camera, press the blue button. Secondary reports can beaccessed by holding one of the buttons until the display changes after 2 seconds.
- To confirm an alarm, look for a miniature red/blue button with a check-mark below the alarm icon. Press either the red or bluebutton depending on the alarm type.
- For more detailed instructions and support, visit support.saphe.dk or refer to the Saphe Link app.
Please note that the available features and secondary reports may vary depending on your country of purchase.
INSTALLATION
- Slide holder onto one of the mounts.
- Place device on the mount.
- Move device to the side, until it locks and it is fastened.
ALARM TYPES
- Mobile speed camera
- Fixed speed camera
- Average speed camera
- Traffic light camera
- Danger
- Car on shoulder
Visit at www.saphe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>