eve Weather Temperature Humidity and Barometric Pressure Current Outdoor Station User Guide
- June 6, 2024
- eve
Table of Contents
eve Weather Temperature Humidity and Barometric Pressure Current Outdoor
Station
installation instructions
-
Press the button once to activate Eve Weather.
Eve Weather works wonders when simply placed on any surface, or mounted on a wall. Thanks to IPX3 water resistance, even outdoor locations exposed to a little rain are suitable. -
Download the Eve app from the App Store.
-
Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
If you have already set up another accessory, go to Settings in Eve to add Eve Weather to your home.
Enjoy
Access Eve Weather using the Eve app, the Home app, and Siri.
- View temperature,humidity and weather trend
- Review past conditions by day, month, or year
- Rules
- Set elevation to calibrate air pressure
- Install firmware updates
- View temperature and humidity
- Configure guest access
- Ask for temperature and humidity
Securely access Eve Weather while you’re away from home and set up powerful
automations. Any Apple T HD, Apple TV 4K or HomePod using the same iCloud
account as your iPhone will automatically serve as a
home hub, no further setup required. Eve is designed to safeguard your
personal data. All data is fully encrypted and only transferred directly
between your Eve Weather and iPhone, iPad or home hub. Learn more at
evehome.com/privacy
Legal Information
This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular in- stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with FCC RF, IC RSS-102 and CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Eve Systems could void your authority to operate this device. Purpose of control: operating control; construction of control: plug-in operating control; type 1 action, operating time: continuous. For questions about compliance with FCC regulations, please contact: Compliance Officer, Eve Systems, 100 Pine St., Suite 1250, San Francisco CA 94111, USA. Hereby, Eve Systems declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at www.evehome.com/doc
- Frequency range: 2402 – 2480 MHz (BLE) / 2405 – 2480 MHz (Thread); max. EIRP: 3 dBm Product: 10EBS9901
- Model: 20EBS9901
- Part: 51EBS9901
- FCC ID: SNE-WEATH-002
- IC: 11192A-WEATH002
battery reset
When replacing the battery, use a coin to open the enclosure. Insert a new
CR2450 battery with the positive (+) side up, and push gently while closing
the cover. Press and hold the button for 10 seconds to reset Eve Weather
.
Please keep your HomeKit setup code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>