Ekrist HX160S7 Wireless Portable Charger Power Bank Instruction Manual
- June 6, 2024
- Ekrist
Table of Contents
Ekrist
HX160S7 Wireless Portable Charger Power Bank
Instruction Manual
Operation Instruction for Portable Power Source
Please read this operation instruction before using the product.
Product Ports Product Features
Safety: With multiple protection designs, several abnormal conditions
such as overcharge, over-discharge, high temperature, and short circuit can be
easily handled no matter in charging, discharging or standby state to provide
a reliable guarantee for your mobile phone and digital device. Efficiency:
With quick charging and discharging efficiency, supporting quick charging and
discharging, QC3.0
PD3.05V2.1AQi 10W wireless charging intelligent output. intelligent output. ,
Support smart input such as PD3.0, 5V / 2.1A Compatibility: embedded with
intelligent USB charge controller, compatible with mainstream mobile phone and
digital device, supporting mainstream quick charging and discharging devices.
Quality: high-quality Li-polymer electric core is selected with customized
charging and discharging electric chip.
Product Introduction
Thank you for your selection. This product is a type of high-capacity portable
power source with a high-quality Li-polymer electric core and customized
charging and discharging electric chip, which performs well in safety,
efficiency, compatibility, etc.
Product model: HX160S7
Battery type: Li-polymer electric core
Input parameter:Type-c:5V/2.1A,9V/2A,12V/1.5A(Max)
Micro:5V/2.1A
Output parameter: Type-c:5V/3A,9V/2A,12V/1.5A(Max)
USB QC: 5V/3A,9V/2A/12V/1.5A(Max), USB2.1A:5V/2.1A
Wireless charging output5W 7.5W 10W(Max
Dimension: ~21.1×77.8×156.5mm
Usage temperature: 0~45
Product Operation
Power Indicator Switch
After the product stops working, the LED light will automatically turn off in
about 35 seconds. To view the current remaining power of the product, you can
tap the switch to re-light the LED light to view the current remaining power
of the product, gently and continuously press twice: stop charging.
Charging
Charge the product with a brand power adapter connection. LED light shows the
current battery charge while charging
capacity
Indicator light| 0–25%| 25–30%| 50—75%| 75 – I OW 0| finished charging
---|---|---|---|---|---
LEDI| flicker| bright| bright| bright| bright
LED2| | flicker| bright| bright| bright
---|---|---|---|---|---
LED3| | | flicker| bright| bright
LED4| | | | bright| bright
Output
This product uses a smart identification charging design. When the digital
product is connected to a USB power cable, the digital product can be
intelligently and automatically recognized, and the charging function can be
activated. LED light shows the current battery charge during charging
Wireless charging function: align the position of the receiver of the digital
product supporting wireless charging with the position of the wireless
charging indicator of the mobile power supply, and start the charging
functions wireless charging is abnormal, there is a foreign object or the LED1
is red when it is fully charged. During the charging process, the LED
indicator shows the current battery level.
capacity
Indicator light| low battery| 0 —25%| 25-50%| 50-75%| 75 — 100°A
---|---|---|---|---|---
LEDI| flicker| bright| bright| bright| bright
LED2| | | bright| bright| bright
LED3| | | | bright| bright
LED4| | | | | bright
Notice
- Please fully charge this product before the first usage.
- During the usage of this product, please lighten the screen of the digital product and confirm that the charging connection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital product with this product, please select the adaptive connecting line by yourself.
- If the LED light of this product goes out during the charging process of the digital product, it means that the battery of the product is low, please charge it immediately.
- During the wireless charging of the digital product, the red light of LED1 is on to indicate abnormal charging (foreign objects). Check whether the position of the receiver of the digital product corresponds to the position indicated by the mobile power wireless charging and whether there are other metal objects.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss. If the product enters into protection status due to an output short circuit or other reasons (LED has no display after pressing buttons), it can be recovered by charging activation via an external charger.
Warning
Since this product contains Li-ion electric core, it’s forbidden to dismantle
the product shell arbitrarily to avoid possible damage to the electric core or
other dangers. It’s forbidden to arbitrarily dismantle, squeeze, puncture this
product or put it in a short circuit, water, fire or exposed to an environment
with a temperature higher than 60 (140).
FCC Statement
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 18 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment. The
device has been evaluated to meet general RF exposure requirements. The device
can be used in portable exposure conditions without restriction. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>