Ekrist PD 22.5W Power Bank Ultra Slim 10800m Ah Fast Instruction Manual
- September 11, 2024
- Ekrist
Table of Contents
Ekrist PD 22.5W Power Bank Ultra Slim 10800m Ah Fast
Specifications
- Product: Power Bank
- Capacity: High-capacity mobile power supply
- Cells: Lithium polymer cells
- Performance: Outstanding safety, efficiency, and compatibility
Power bank instruction
Please read this manual carefully before using the product
Thank you for using this product. This product is a high-capacity mobile power
supply, using high-quality lithium polymer cells, and has outstanding
performance in safety, efficiency, compatibility and other aspects.
Product introduction
Basic parameters
- Model: HX100X6
- Battery type: Lithium polymer cell
- Type-C Input: 5V/2A,9V/2A
- 2QC Output: 5V/2.4A,9V/2A,12V/1.5A
- Type-C output: 5V/3A,9V/2.2A,12V/1.5A,5V/4.5A,4.5V/5A
- Size: 16×72×152mm
- Operating temperature: 0 °C ~ 45 °C
Product port
Power indicator switch
If you need to check the current remaining power of the product, you can tap
this switch to re-light the LED display to view the current remaining power of
the product (if there is no other operation, the display will turn off again
in about 30 seconds). During the discharge process, tap this switch twice in a
row to end the current discharge state, and then tap this switch again to
carry out the discharge work again
Charge
Use the brand power adapter connection to charge this product. While charging,
the LED display shows the current power level.
Discharge
This product uses intelligent identification charging design. When the USB
power cable is connected to the digital product, the digital product can be
intelligently and automatically identified and the charging function can be
started. During the charging process, the LED display shows the current power
level.
Note
- For the first time, please fully charge this product.
- When using this product, please light up the digital product screen to confirm that the charging connection sign has been displayed correctly to ensure that this product has been used normally.
- When charging this product or using this product to charge digital products, please choose the appropriate cable by yourself.
- In the process of charging the digital product, if the LED display of this product is completely extinguished, it means that the power of this product is insufficient, please charge it as soon as possible.
- When a digital product is connected to this product, the digital product gives priority to the power of this product.
- When the digital product is fully charged, please unplug the cable in time to avoid loss.
- When this product enters the protection state due to various reasons such as output short circuit (manifested as no LED display after pressing the button), it needs to be restored by charging activation operation through an external charger.
Warn
This product contains lithium-ion batteries, and it is strictly forbidden to disassemble the product shell without permission to avoid possible cell damage or other dangers.
It is strictly forbidden to disassemble, squeeze, puncture, short-circuit this product or put it into water, fire or exposure to temperatures above 60°C (140°F).
FAQ
- Q: How do I know when the power bank is fully charged?
- A: The LED display will show full power or stop blinking when the power bank is fully charged.
- Q: Can I charge multiple devices simultaneously?
- A: Yes, you can charge multiple devices as long as the total output does not exceed the power bank’s capacity.