Ekrist Power Bank Ultra Slim PD 22.5W 10800mAh Fast Instruction Manual
- June 14, 2024
- Ekrist
Table of Contents
Ekrist Power Bank Ultra Slim PD 22.5W 10800mAh Fast Instruction Manual
Please read this manual carefully before using the product
Thank you for using this product. This product is a high-capacity mobile power supply, using high-quality lithium polymer cells, and has outstanding performance in safety, efficiency, compatibility and other aspects
Product introduction
Basic parameters
- Mode l: HX100X6
- Battery type : Lithium polymer cell
- T ype-C Inpu t: 5V/2A,9V/2A
- 2QC Outpu t: 5V/2.4A,9V/2A,12V/1.5A
- T ype-C output : 5V/3A,9V/2.2A,12V/1.5A,5V/4.5A,4.5V/5A
- Size: 16×72×152mm
- Operating temperature: 0 °C ~ 45 °C
Power indicator switch
If you need to check the current remaining power of the product, you can tap this switch to re-light the LED display to view the current remaining power of the product (if there is no other operation, the display will turn off again in about 30 seconds). During the discharge process, tap this switchtwice in a row to end the current discharge state, and then tap this switch again to carry out the discharge work again
Charge
Use the brand power adapter connection to charge this product. While charging, the LED display shows the current power level.
Discharge
This product uses intelligent identification charging design. When the USB power cable is connected to the digital product, the digital product can be intelligently and automatically identified and the charging unction can be started. During the charging process, the LED display shows the current power leve
Note
- For the first time, please fully charge this product
- When using this product, please light up the digital product screen to confirmthat thecharging connection sign has been displayed correctly to ensure that this product has beenused normally.
- When charging this product or using this product to charge digital products, please choosethe appropriate cable by yourself.
- In the process of charging the digital product, if the LED display of this product is completely extinguished, it means that the power of this product is insufficient, please charge it as soonas possible.
- When a digital product is connected to this product, the digital product gives priority to thepower of this product.
- When the digital product is fully charged, please unplug the cable in time to avoid loss
- When this product enters the protection state due to various reasons such as output short circuit (manifested as no LED display after pressing the button), it needs to be restored by charging activation operation through an external charger.
Warning
This product contains lithium-ion batteries, and it is strictly forbidden to
disassemble the product shell without permission to avoid possible cell damage
or other dangers.
It is strictly forbidden to disassemble, squeeze, puncture, short-circuit this
product or put it into water, fire or exposure to temperatures above 60°C
(140°F).