BLUEWEAR 008906 Dust Filter Masks Instruction Manual

: June 6, 2024
: BLUEWEAR

008906

EN DUST FILTER MASKS
Operating instructions (Translation of the original instructions) Important! Read the user instructions carefully before use. Save them for future reference.

EU DECLARATION OF CONFORMITY
Item number
008906, 008907 **Jula AB, Box 363, SE-532 24 SKARA, SWEDEN**

This declaration of conformity is issued under the sole responsibility of the manufacturer.
DUST FILTER MASK FFP3
FFP2 NR, 3-PACK, 10-PACK Conforms to the following directives, regulations, and standards:
Directive/Regulation Harmonised standard

Directive/Regulation	Harmonized standard
PPE (EU)/2016/425	EN 149:2001+A1:2009, Cat Ill

The PPE is identical to the PPE which is subject to EU type-examination certificate No:| CE 724130
---|---
Conformity assessment procedure according to (EU) 2016/425:| D
Name and address of the notified body involved:| BSI Group The Netherlands B.V.
Say Building, John M. Keynesplein 9, 1066 EP
Amsterdam, Netherlands
No: 2797

This product was CE marked in year

Skara 2021-09-21

Maria Sihvonen Grahn
BUSINESS AREA MANAGER
DoC: EN-SE-NO-PL-DE-FI-FR-NL

SAFETY INSTRUCTIONS

Failure to follow all the instructions and safety instructions can result in the dust filter mask working less effectively, which can cause illness or death.
It is important to select the right dust filter mask. Consult an occupational hygienist or an environmental and safety representative to determine the suitability of the dust filter mask for the actual purpose.
Do not use the mask when the concentration of harmful substances signifies an immediate danger to health or life.
Leave the work area immediately and go into the fresh air, if:
— It is difficult to breathe.
— You become dizzy or experience another discomfort.
Never modify the dust filter mask in any way.
Replace the dust filter mask immediately if it becomes difficult to breathe, if the mask is damaged, or if it cannot be made to fit properly.
For disposable use only. No maintenance is necessary. Discard the dust filter mask after using it during a shift.
The dust filter mask can cause an allergic reaction to skin contact. If an allergic reaction occurs, leave the contaminated area, remove the mask and seek medical attention.

NOTE:
The dust filter mask should only be used once and then discarded.

LIMITATIONS

Handle the dust filter mask with care and only use it in accordance with these instructions.
The dust filter mask does not supply the user with oxygen. The dust filter mask is not intended to be used in areas deficient in oxygen (oxygen content less than 19%) or areas containing a surplus of oxygen (higher than 23.5%).
The upper oxygen content limit is not absolute, but every increase in the content of oxygen in the air over the normal level increases the risk. An increase in the content of oxygen increases the risk of fire in the event of an electrostatic discharge or other sparking and increases the speed and intensity of the sequence.
Do not use the dust filter mask in an explosive environment, e.g. near flammable liquids, gas, or dust.
Do not use the dust filter mask in the following cases.
— If the concentration of contaminants is so high that it is acutely harmful to health or life-threatening.
– If the type or concentration of contaminants is unknown.
— If the concentration of contaminants is over 0.1 %.
Always check the tightness of the mask, the filter, and valves before entering the contaminated area.
Beards and other facial hair under the sealing areas on the mask to the skin can reduce the sealing capacity.

SYMBOLS

****	Read the instructions.
Approved in accordance with the relevant directives.
The expiry date is given in the format yyyy/mm.
Max ambient relative humidity, storage: < 90 %.
Storage temperature -10°C to +50°C.
---	---

REGULATIONS AND STANDARDS

Regulation of the European Parliament and Council (EU) 2016/425 on personal protective equipment.
EN 149:2001+A1:2009 Cat Ill – Breathing protection – Filtering half masks to protect against particles.

TECHNICAL DATA

The product is CE marked and complies with the EU directive 2016/425 on protective equipment and with the standard EN 149:2001+A1:2009 Cat Ill.
The product has been type-approved by the accredited testing institute: BSI Group The Netherlands B.V. Say Building, John M. Keynesplein 9, 1066 EP Amsterdam, Netherlands. No: 2797
Protection factor FFP2 NR

DESCRIPTION

PROTECTION FACTOR

FFP1| Protection from non-toxic airborne particles and liquids (e.g. oil mist) with a concentration of up to 4 x MAC/ OEL/TLV (e.g. NPF = 4) or 4 x WEL (e.g. APF = 4).
---|---
FFP2| Protection from non-toxic and weak to average toxic airborne particles and liquids (e.g. oil mist) with a concentration of up to 12 x MAC/OEL/ TLV (e.g. NPF =12) 0110 x WEL (e.g. APF = 10).
FFP3| Protection from non-toxic, weak to average toxic and highly toxic airborne particles and liquids (e.g. oil mist) with concentration of up to 50 x MAC/OEL/TLV (e.g. NPF = 50) or 20 x WEL (e.g. APF = 20).
---|---

NOTE:

MAC = Maximum Admissible Concentration.

OIL| Occupational
Exposure limit| Limit for occupational exposure
---|---|---
TLV| Threshold limit Value| Threshold
NPF| Nominal Protection Factor| Nominal protection factor
WEL| Workplace Exposure Limit| Limit exposure at the workplace
APP| Assigned Protection Factor| Assigned protection factor

USE

CHECK BEFORE USE

Check the dust filter mask and all it parts before use for holes and other damage. Do not use the dust filter mask if it is damaged. Discard, and use a new one.

ADJUSTMENT

Hold the dust filter mask in your hand with your fingertips on the nose section. Allow the neck-straps to hang freely from your hand.
Hold the dust filter mask tightly against your face with the nose section over the bridge of your nose.
Stretch the lower neck strap, pass it over your head, and position it below your ears. Stretch the upper neck strap, pass it over your head, and position it above your ears.
Press the soft nose section so that it fits tightly around your nose.
FIG. 1

TIGHTNESS CHECK

Dust filter masks without exhalation valve

Cup both hands over the dust filter mask and breathe out with force.

Dust filter masks with exhalation valve

Cup both hands over the dust filter mask and breath in deeply.
You should be able to feel under pressure inside the dust filter mask.
If air flows around your nose, the nose section must be sealed. • If air leaks in at the edges, the neck strap must be moved so that the mask fits better.

NOTE

Replace the dust filter mask immediately if it becomes difficult to breathe, if the mask is damaged or if it cannot be made to fit properly. Follow the instructions carefully for optimum safety.

MAINTENANCE

STORAGE

Store dust filter masks in their packaging, protected from direct sunlight in a cool and dry place until they are going to be used.
Keep away from possible contamination and physical damage.

TRANSPORT

During transportation, the dust filter masks should be stored in the packaging, in which it was supplied or another suitable container.

Jula reserves the right to make changes.
For the latest version of operating instructions, see www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
202111-05
© Jula AB