inateck KB04002 Keyboard for iPad Instruction Manual

: June 28, 2024
: inateck

Table of Contents

inateck KB04002 Keyboard for iPad
Bluetooth Pairing
Product Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

inateck KB04002 Keyboard for iPad

Instruction Manual

KB04002 Keyboard

Pencil Holder
USB-C Charging Port
Bluetooth Pairing Button
Power Switch
Low battery indicator-Blue
Battery Indicator – Red
Bluetooth Indicator
Caps Lock Indicator

Bluetooth Pairing

Step 1 : Put the iPad case on and slide the keyboard power switch to the On position. Press the “Connect” button and then your keyboard will enter Bluetooth pairing mode with the Bluetooth indicator blinking in blue.
Step 2 : On your iPad, go to Settings > Bluetooth, turn on Bluetooth and then “Inateck KB04002” will show up in “Other Devices”
Step 3 : Tap “Inateck KB04002” to pair it with your iPad and then the Bluetooth indicator will stay solid in seconds, which means that Bluetooth pairing is completed.

Fix Bluetooth Pairing Problems

Step 1 : Go to Settings > Bluetooth, find “Inateck KB04002” in My Devices and tap the info button next to it, then tap Forget This Device. If there are multiple pairing records related to the keyboard, please clear all of them.
Step 2 : Hold simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed. Step 3: Turn off Bluetooth on your iPad and turn it back on. Then, pair it with your Inateck KB04002.

Shortcut Keys

$inateck-KB04002-Keyboard-for-iPad-image $2$$

LED Indicator

Indicator S tatus| Mea n in g
---|---
Caps Lock Indicator| Solid| Caps Lock on
Off| Caps Lock off
Bluetooth Indicator| Fast blinking| Bluetooth pairing
Off| Bluetooth unconnected
Solid| Bluetooth connected
Slow blinking| Bluetooth reconnecting
Battery Indicator- Red| Solid| Charging
Off| Fully charged
Low battery indicator-Blue Blinking| Battery level<20%

Restore Factory Defaults
Hold simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed.

Check Battery Level
Hold simultaneously to check the battery level according to the blinking frequency off the blue low battery indicator.

Blinking Freque ncy	Ba ttery Level
Once	0-25%
Twice	25′!;,-50%
Three Ti mes	50′!;,-75%
Four Times	75′!;,-100%

Charging
When the battery is low, the low battery indicator will blink in blue. You can recharge the keyboard by using a phone charger or connect it to a USB port of a computer. The keyboard can be fully recharged in approximately 2-3 hours. The battery indicator keeps red when the keyboard is being recharged and it will be off when the keyboard is fully recharged.

Sleep Mode
When KB04002 is left idle for 30 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.

Product Specification

$inateck-KB04002-Keyboard-for-iPad-image $9$$

Packing List

KB04002 *1
Charging Cable *1
Instruction Manual *1

EU/UK Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU and SI 2017 No. 1206. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck-euro-compliance .

Battery Safety Warning: This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.

Service Center