VIKING V80180 Solar Outdoor Led Light Instructions

**VIKING V80180 Solar Outdoor Led Light Instructions

**

Thank you for your purchase and trust in our VIKING equipment. We believe that they will always serve you well and reliably. Read all instructions and warnings in this manual carefully before first use.

Solar lights are designed to illuminate gardens, sidewalks, gazebos, etc. Solar lights are environmentally friendly thanks to an integrated solar panel, which in daylight converts sunlight into electricity, which recharges the built-in battery. The light turns off automatically during the day. The sensor activates when it starts to darken outside.

IMPORTANT WARNING

1. When placing the VIKING solar light, make sure that daylight can fall on the solar panel.
2. Do not press on the upper part of the solar light (solar panel), as this will damage it.
3. When using the solar LED light for the first time, please wait until the battery has been charged by sunlight, approx. 8 hours.
4. If the light is near artificial lighting, the light will not turn on at all.
5. Resistance to weather conditions is IP65, the product is designed for year-round, outdoor use.

INSTALLATION

1. For a solar LED light, choose a suitable place where the impact of sunlight is sufficient and lasting for as long as possible.
2. Sunlight should be exposed to light for at least 8 hours.
3. Remove the individual parts from the packaging.
4. Fasten the light to a flat surface with the enclosed screws to a mounting height of ideally 2 to 2.5 meters above the ground.
5. To activate the VIKING solar LED light, select the desired lighting mode (1), (2), (3).
6. LED light usually needs about 8 hours of sunlight first to charge to full battery power.

CONTROL

Press the button to activate mode 1. FULL LIGHT. Each time you press, you switch between the individual modes. When changing the mode, the light flashes according to the order of the set mode (eg if you set the 2nd DIMMED LIGHT, the light flashes twice.).

The light turns off automatically during the day. The sensor and the set mode are activated when it starts to dim outside.

Solar light is equipped with 3 light modes:

1. FULL LIGHT with motion sensor:
   This mode keeps the light off until the sensor detects movement. When motion is detected, the sensor turns on a light that turns off when the sensor does not detect any movement for at least 15 seconds.

2. DIMMED LIGHT with motion sensor:
   This mode keeps the dipped beam on until the sensor detects movement. Upon detection of motion, the sensor turns on full light, which switches back tom dimmed light when the sensor does not detect any movement for at least 15 seconds.

3. STANDING DIMMED LIGHT without motion sensor
   This mode keeps the dipped beam on always, regardless of movement around the sensor.

NOTE: For V80180, 2nd and 3rd modes are switched (2. STILL LIGHT and 3. DIMMED)

The angle of movement of the sensor ranges from 120 ° to 270 ° depending on the model of the LED light

PRODUCT / PACKAGING DISPOSAL

Do not dispose of the product or batteries at the end of their useful life as unsorted municipal waste, use separate waste collection points. By ensuring this nproduct is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

WARRANTY CONDITIONS

The warranty period is 24 months for the product and 6 months for the battery from the date of sale. The warranty applies to the product only if the product is used in accordance with the enclosed instructions for use.
If a product defect occurs during the warranty period, the user is entitled to a free repair at the seller where he purchased the product, provided that it is
demonstrably a manufacturing or material defect. The condition for claiming a complaint is the submission of a sales document, which must be provided with the address and stamp of the seller, the seller’s signature and the date of sale.

WARRANTY CLAIMS ARE EXPOSED

1. If the warranty has not been claimed during the warranty period.
2. In case of unprofessional repairs or interventions in the product. Repairs and interventions to the product may only be performed by an authorized service center of the dealer.
3. If the product is mechanically or otherwise damaged by the user.
4. The warranty does not cover normal operational wear, defects caused by intentional damage, gross negligence in use or if performed by the user modifications or alterations to the product. The manufacturer is not liable for damage caused by improper handling or maintenance outside the scope of the relevant instructions for use.

The importer declares that he is in the register of companies fulfilling the obligation of take-back, separate collection, processing, use and disposal of electrical equipment and REMA electrical waste.

ADDITIONAL INFORMATION

Technical changes and printing errors are reserved.

SOLAR LED LIGHTS VIKING user manual CZ/SK/EN/DE/HU

MADE IN CHINA

VIKING products are distributed and serviced by:
BONA SPES s.r.o., Řepčín 250, Olomouc 77900, Czechia
VAT No.: 03476774, +420 777 109 009, www.best-power.cz, info@best-power.cz

References

• Design a výroba kiosků - POWER electrical services, s.r.o.
• Power banky, Externí a záložní baterie | Best-PowerBank.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>