MNC PA2328 SD/USB/MMC MP3 Player User Manual
- June 6, 2024
- MNC
Table of Contents
MNC PA2328 SD/USB/MMC MP3 Player
With this multimedia head unit, you don’t have to give up your favorite music on the go. In line with today’s expectations, you can also take your music with you on a microSD card or USB storage device, but it is also possible to connect a mobile device via AUX and Bluetooth.
SPECIFICATIONS
- Easy to install
- Standard 1 DIN size
- USB / SD card / AUX / Bluetooth
- In black
- Clock display
- Sound mode selection
- (Classic/Rock/Jazz/Pop/Flat/Off)
RADIO:
- Frequency: 87.5 MHz – 108 MHz
- Signal to noise ratio: ≥ 40 dB
- FM sensitivity: ≤ 37 dB
MEDIA PLAYER:
- Supported formats: Mp3
- MP3 bit rate: 8 to 320 kb/s
- Stereo crosstalk: ≥ 35 dB
- Signal to noise ratio: ≥ 50 dB
GENERAL:
- Voltage (negative ground): 12V DC
- Music output power: 4 x 50 W
- Audio output: 2 pairs of RCA
- Speaker impedance: 4 – 8 Ω
- Dimensions: 178 x 50 x 107 mm
PARTS DESCRIPTION
- PWR/MOD – Press and hold: On/Off button; – Press briefly: mode switch, RADIO/AUX/USB/microSD/Bluetooth – End call function for Bluetooth phone call
- Press the CH+ or CH- button briefly to switch between radio programmed positions (1-6)
- Radio station search / rewind / start previous music file
- Volume setting / Sound setting
- EQ – Sound mode selection Classic / Jazz / Rock / Pop / Flat / off
- Display
- MicroSD memory card slot
- CLK – Clock display, setting
- BND / AS – Radio channel change (FM1-2-3) – Answer a call during a Bluetooth phone call
- MUTE – mute
- Radio station search / skip forward / start next music file
- MIC – Built-in microphone
- AUX input (3.5mm stereo jack)
- USB – USB socket
- 1/ – channel 1 storage / Play-Pause
- 2/INT – channel 2 storage / Browser mode
- 3/RPT – channel 3 storage / “Repeat” button. Play the current song again.
- 4/RDM – channel 4 storage / “Random” random music playback from the media.
- 5/-10 – channel 5 storage / skip 10 backwards / close a folder (for data storage)
- 6/+10 – channel 6 storage / skip 10 backwards / open a folder (for data storage)
OPERATION
On / off (button 1)
Press briefly to switch the device on and off
Radio station search, storage, programmed position change
In radio mode, press the CH + – button (2) briefly to select the desired
programmed position from 1 to 6. After the selecting, you can search for a
frequency with the help of search buttons 3, pressing them briefly for
automatic search, long pressing for manual search. To store the frequency,
press and hold the numbered dedicated button for the programmed position.
Press the BND (9 ) button briefly to select one of the 3 FM bands (FM-1-2-3).
Play from USB / microSD device
After inserting the memory storage, music starts automatically. Music files
can be selected with the 3 buttons, long press them to fast forward or rewind
the music. Press the play / pause button (1) to pause the music, then press it
again to start play.
Clock display and setting
In any mode, pressing the CLK (9.) button will show the time on the display.
Press and hold the button for the clock to start flashing, then pressing it
again the minute display will start flashing next. You can set the time by
turning the volume knob left or right.
Operating mode (button 1)
In any mode, press briefly to select the desired mode: RADIO, AUX, SD, USB,
Bluetooth.
Browser mode
In MP3 player mode, press 1x to play the first 10 seconds of music files.
Skip 10 forward/backwards
In MP3 player mode: briefly press the 5 / -10, 6 / + 10 buttons to select the
next or previous 10 tracks.
Sound adjustment
The following settings are available by pressing the volume key:
- BASS – bass
- LEFT – Balance of right and left speakers
- FAD – balance of front and rear speakers
- EQ – access factory sound settings
- (OFF-CLASS-ROCK-POP-FLAT-JAZZ)
- LOUD – Loudness, dynamics enhancement to medium volume
- VOLUME – volume
- MONO / STEREO – sound setting selection
Note: When the factory sound modes are on, the treble and bass cannot be adjusted, set the EQ to OFF to reactivate the function.
