Regetek CW7020 7.0-Inch TFT LCD MP5 and Radio Receiver Instruction Manual

Regetek CW7020 7.0-Inch TFT LCD MP5 and Radio Receiver

Note : Will this car radio fit your car?

•  This is an International Criteria Installation Size car radio designed to work on most vehicles with double din dash(wiring harness varies). Measure the faceplate of your current head unit. If it measures roughly 7 inches long by 4 inches tall, then yours is a double DIN head unit. And this car radio will fit.
•  check the dimensions of your console vs the product.
•  Whether you would need a harness for the stereo or not ( If yes, get a dimensionally corresponding metra harness). 3. If your car is a single or double DIN (if single, you will need a single to double din converter) plus.
• You will also need a radio antenna adapter.
•  The two main radio sizes are”single DIN” and “double DIN,” and it’s actually pretty easy to figure out which one you need. If your car has a single DIN head unit, the front faceplate should be about 7 x 2 inches (180 x 50 mm) If it has a double DIN head unit, the front faceplate will be twice as tall. Since “2 DIN car stereo” is a colloquial term for double DIN, the head unit in your car will measure roughly 7 x 4 inches (180 x 100mm) if it conforms to that standard.
•  If not perfectly matched. you can also buy a dash kit mount that allows the installation of a double din head unit into a nondouble din size aperture. Please search” Your cars’ brand+ make+ Year + dash kit” on Amazon. For example. If your car is Subaru Impreza 2008, you can search “Subaru Impreza 2008 dash kit” on Amazon. Or You can search on www.metraonline.com and search “2008 Subaru Impreza” on the search bar in the upper right corner. In this way, you will find the dash kit you need ( Part#95-8902) for your 2008 Subaru Impreza. Then you can search ” Metra 95-8902″ on Amazon to buy.

Wire Connection

Wiring-Wiring

Parking Brake Connection
In order to view videos, the parking brake wire must be connected, and the vehicle stopped

Correct connection
Connect the speakers according the following diagram, incorrect connections will damage the unit or your loudspeakers.

Incorrect connections

Review camera connections

Will your steering wheel controls work with this
car radio?
Yes, this car radio supports steering wheel controls.If your car has steering wheel control module,there is no need to buy a extra wire harness. There are 2 wheel key wires(the brown and brown/balck) which are for connecting the steering wheel controls function module.Just connect the wire to the steering wheel controls. If don’t have,You may need to buy a Universal Steering Wheel Control Interface.You could buy “Metra Axxess ASWC-1 Universal Steering Wheel Control Interface” On Amazon.

In the task bar clicC to enter the main menu interface.

1. Q) @ ®CD Click here to enter the radio player interface.

2. @ Click here to enter the music player interface.

3. @ Click here to enter the video player interface.

4. © Click here to go to the photo browsing interface.

5. @ Click to go to aux input interface.

6. (!) Click here to go to the Bluetooth player interface.

7. ® Click to go to the prec/next page

8. ® Click here to adjust the screen brightness and off screen @) Click to go to System Settings interface In the main menu interface, touch MUSIC icon to enter the music state.

9. 2.1 Features taskbar icon

10. CD Click here to enter the menu setting.

11. @ The volume regulation, paddling can adjust the volume. ® Return

12. © Enter the main menu Q) @ ® ®

13. ® ® ® (Z) ® Click here to play the prev/next song. @ Click here to play / pause.

14. (!) Click here to Shuffle.

15. @ Click here loop.

16. ® Playback progress display.

PHOTO

In the main menu interface, touch the PHOTO icon to enter the photo state
CD Click here to play the prev/next picture.

1. @ Click here to play / pause.
2. @ Click here zoom in.
3. © Click here zoom out.
4. ® Click here to rotate image.
5. @ Click here to Play background music.

VIDEO

1. In the main menu interface, touch VIDEO icon to enter the video state.
2. CD Click here to play the prev/next video.
   @ Click here to play / pause.
   @ Click here to switch language.
   @) Click here to switch subtitle.
   ® Playback progress display,Touch paddling can fast forward and
   rewind.
   ® Video input switching.

– RADIO

In the main menu interface, touch RADIO icon to enter the radio state.

1. CD Click here to manually scan radio.

2. @ In radio state, each band has six frequency points, press any
   frequency, you can store your favorite radio stations.

3. @ LOC/DX Switch

4. @) Stereo

5. ® Press to automatically search for radio stations and store the FM1-FM2- FM3-AM1-AM2 30 radio stations, short press to navigate through the radio.

 BT

In the main menu interface, touch BT icon to enter the bluetooth state.

Click into the dial-up interface.

1. (!) Bluetooth dial number keys can be used to enter a phone number
   to dial.

2. @ Backspace

3. ® Bluetooth is available under the call state will host the button to
   switch the sound to the phone.

4. © hang up the phone.

Click to go to the call log interface

1. ® @ @) (!) Missed record, received record dial record list. @ Received record
2. ® Dial record
3. © Missed record

Click into contact interface

Click to go to the Bluetooth music interface.

(!) Prev / Next , play/ pause function.

SETUP

In the main menu interface, touch SETUP icon to enter the state.

1. (!) Click to sound settings.
2. @ Click on the language Set up.
3. ® Other settings.
4. © Click to go to the radio region selection. ® Click on the steering wheel control settings. ® Click to set the time.

Touch Radio Area ,select the radio region.

Touch TIME, into the time setting.

1. CD Touch to set the time and date
2. @ 12/24 standard switch

Touch Wheel Control , Steering wheel control interface.

Enter the learning state:

1. CD long press button on the steering wheel use left hand, thentouch screen corresponding function use right hand, make it highlight, mean learn OK;
2. @ When the learning was completed, click Confirm.
3. @ When learning has failed, it should be not respond in the steering wheel.
4. © If operating mistake in the learning process, click Reset tore-learning.

Other settings interface.

1. CD Software Update
2. @ Factory Data Reset
3. @ Calibration
4. © Background Set

Touch Language, select the national language.

AUXIN

In the main menu interface, touch aux-in icon to enter the aux-in state. Front panel 3.5mm audio input.

AV IN

In the main menu interface, touch av in icon to enter the av in state.

RCA audio/video input.

 INSTALLATION

•  Remove the stereo carefully from the box, preserving the box, for the unit warranty. and service.
  PRECAUTIONS

•  Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver.

•  Avoid installing the unit where it would be subject to high temperatures, from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.

•  Use only the supplied mounting hardware for a safe and secure installation.
  MOUNTING ANGLE ADJUSTMENT

•  Adjust the mounting angle as desired. Please install the front cover of the two movements to protect the host screws removed, cd player to work properly. □ as shown:

1. Remove screws
2. Unpack mounting the bracket car dashboard and mounting bracket
3. meet Check the dashboard requirements, the window size alignment to
4. By bracket machine fixed with screws in the dashboard
5.  lnstalled dashboard

Note: Keep the release Key in a safe place as you may need it in the future to remove the unit from the car.

FEATURES

• The Unit Features MP5/USB/SD Ports and 7.0 inch TFT LCD
•  Electronic PII Tuning Control with 30 Programmable Stations
• MP3/WMA Compatible
•  Preamplified Line-out
•  Front Audio Aux-in
•  USB Port and SD/MMC Input
• Last Track Memory (RADIO & SD/MMC & USB)
•  7.0 inch TFT LCD

 SPECIFICATIONS

• FM TUNER 87.5-107.9MHz

• Sensitivity 10dB μV

• I.F. Frequency 10. 7MHz

• Frequency Response 80Hz-12KHz(± 3dB)

• Stereo Separation >25dB

• S/N Ratio >50dB
  AM TUNER

• Frequency Range: 530 – 1710KHz

• IF Range: 450KHz

• Usable Sensitivity (-20dB): 32dB
  GENERAL
  

• Power Supply Voltage 12VDC

• Max Current Consumption 15A

• Max Output Power 4x50W

Note: specifications and the design are subject to possible modification with out notice due to improvement.

REMOT CONTROL GUIDE WARNING

SUPPORT VIDEO FORMAT

• FCC Warning Statement
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
  (2) this device must accept any interference received, including interference that may cause undesired operation.

• The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>