RYOBI A01CWG Cutting Wheel Guard User Guide
- June 3, 2024
- RYOBI
Table of Contents
RYOBI A01CWG Cutting Wheel Guard
For use with RYOBI PCL445 and PBLAG01 Angle Grinders.
WARNING!
To reduce the risk of injury, user must read and understand the operator’s
manual for their angle grinder and this instruction sheet. Always wear eye
protection with side shields marked to comply with ANSI Z87.1. Ensure
compatibility and fit before using this accessory. Do not use this accessory
if a part is damaged or missing. If you are not comfortable performing any of
the functions described in these instructions, take your unit to an authorized
service center.
NOTE: Follow all guidelines and warnings in your angle grinder operator’s manual.
WARNING:
Always attach the accessory cutting wheel guard to the wheel guard when using
a Type 1 straight or cut-off wheel. Failure to use the guard insert could
result in serious personal injury.
Always install the accessory cutting wheel guard before performing cutting operations. When attached correctly, the wheel guard insert and wheel guard provide protection on both sides of the cutting wheel.
ATTACHING THE GUARD INSERT
WARNING:
Always attach the guard insert to the wheel guard when using a cutting wheel.
Failure to use the guard insert could result in serious personal injury.
Always install the guard insert before performing cutting operations. When attached correctly, the guard insert and wheel guard provide protection on both sides of the cutting wheel.
-
Place the edge of the guard insert closest to the label over the edge of the wheel guard.
NOTE: The label on the guard insert should be pointing away from the cutting wheel. -
Slide the guard insert over the grinding wheel and rotate it until the tab snaps into place.
-
To remove, pull the tab away from the wheel guard and rotate guard insert off of the wheel guard.
OPERATING THE TOOL
Refer to the PCL445 or PBLAG01 operator’s manual for instructions on grinding and cutting with the too.
- Wheel guard
- Guard insert
- Label
- Edge
- Tab
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>