ILIFE A4s Robot Vacuum Cleaner User Manual

: June 5, 2024
: iLIFE

Table of Contents

ILIFE A4s Robot Vacuum Cleaner
Customer Service Number
Important notes
Safety Instructions
Product Parts
Remote control
- Direction Buttons
How to Use
- Schedule
- Cleaning mode
Maintenance
Product Specifications
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ILIFE A4s Robot Vacuum Cleaner

Thank you for choosing ILIFE A4s robotic vacuum cleaner! You’ve joined millions of people to get cleaning done robotically. This user manual helps you to keep your robot performing at its best. Please take a few moments to read through it. You are entitled to the exclusive benefits once you register your robot at www.iliferobot.com/register:

– Access to ILIFE 24-hour online customer support;
Get first-hand updates, including new model launch and exclusive discounts.

As a registered user, you could also share your robotic cleaning experience with us. ILIFE listens and makes product improvements based on your valuable feedbacks. If you have any questions, please contact our customer service for assistance or visit www.iliferobot.com for more information. Enjoy automated home cleaning performed by ILIFE A4s!
ILIFE Customer Service

Customer Service Number

1-800-631-9676 (Toll free for USA & Canada)
Mon-Fri: 9:00 a.m. – 18:00 p.m.
Email: support@iliferobot.com

For more details, please visit www.iliferobot.com

Important notes

A4s contains electronic parts. Do NOT put it in water or spay it with water. Clean the robot with a dry cloth only.

Where to start

Place the charging dock against a wall in an open area. Do not put it near a door or steps.
Before cleaning begins, clear up excessive objects on the floor (e.g. cables, bar stools, etc.).
Choose MAX mode to clean areas with accumulated dust.

For best performance

Remove the main brush. Clean the bristle ends and the roller twice a week. (Figure 1)
Remove the front wheel with a screwdriver. Remove hair in the wheel cavity and axle twice a week. (Figure 2)
Empty the dustbin and clean filter and bristle brush after each use. Replace filter every month.

ILIFE A4s Robot Vacuum Cleaner fig 1

Safety Instructions

Before using the robot, please read and follow the below safety instructions and precautions.

Read through this user manual carefully before using the robot.
Retain this user manual.
Any operation that is not described in this user manual may injure the users or cause product damage.

WARNING

Only certified technicians may disassemble the robot. Users must not disassemble or repair the robot.
Use factory authorized adapter only. Using nonspecific adapter may cause electric shock, fire or robot damage.
Do not touch the power cord, plug or adapter with wet hands.
Do not allow clothes or any part of your body to be drawn into the robot’s wheels.
Do not place the robot near cigarette, lighter, matches or other flammables.
Clean the robot after charging finishes.
Do not over-bend the power cord or pressure the power cord with heavy or sharp objects.
Do not use the robot outdoor.
Do not sit on the robot or attach any object on it.
Do not use the robot on wet floors.
Before using the robot, remove all fragile objects (textile, glass, lighting, etc) and other objects that could be caught in the brushes or suction opening (cords, clothing, papers, drapes, blinds, etc).
Do not place the robot where it could easily fall off (tables, chairs, etc).
Turn off the power switch during transportation or when the robot will not be used for a long time.
To avoid battery damage, check if the adapter and outlet are properly connected before using the robot.
To avoid tripping, make sure everyone in the house knows the robot is working.
Do not use the robot when the dustbin is full.
Use the robot in environment between -I0°C and 50°C.
Do not place the robot in high-temperature environment.
Battery must be removed from the robot before the battery is scrapped.
Disconnect electricity supply before removing the battery.
The battery is to be disposed of safety according to local regulations.

NOTE : This product should not be used by children, mentally challenged people or people who lack related experience and knowledge (unless they are under proper supervision).

Product Parts

Main body and accessories

NO.	Description	Qty
1	Main Body	1
2	Charging Dock	1
3	Remote Control ( battery not included )	1
4	Adapter	1
5	Cleaning Tool	1
6	User Manual	1
7	Extra Side Brushes	2
8	High Performance Filter	1

Robot anatomy

Charging dock

CLEAN button status signals

Robot status	Light signals
Charging	Orange light flashes
Charging finished	All lights off
In selected mode	Green light flashes
Malfunctioning	Red light turns solid
Low battery	Orange light turns solid
In cleaning mode	Green light turns solid

Remote control

Clean

To start cleaning in selected mode.
To stop current cleaning cycle.
To change from sleep mode to selected mode.

Direction Buttons

Upward Button:

To increase minute and hour setting in schedule or clock mode.
To move robot forward in selected mode
To stop the robot when it hits against objects.

MAX Button:

To decrease minute and hour setting in schedule or clock mode.
To maximize vacuuming power.

Down Button:

To change from minute to hour in schedule or clock mode.
To turn the robot left.

Right Button:

To change from minute to hour in schedule or clock mode.
To turn the robot right.

Plan

To enter schedule mode when robot is in selected mode.
To confirm cleaning schedule.

Clock

To enter clock mode when robot is in selected mode.
To confirm time setting.

HOME

To return robot to charging dock.

Edge

To clean along the edge of the walls.

Spot

To clean specific areas.

00:00

To display scheduled time.

00:00

To display clock.

Note:

Place two AAA batteries into the remote control.
Remove batteries if the remote control will not be used for a long time.

How to Use

Getting started

Place charging dock on the floor and plug in adapter. Signal light on charging dock will turn solid.

Note : Put charging dock against a wall and remove obstacles about 1 meter on both sides and about 2 meters in front.

Display panel will flash after the power switch (near the power socket) is turned on. (If no command is received, the robot will switch to sleep mode after 45 seconds)

Note:

Always keep the power switch on, otherwise the robot will not work.
If power switch is turned off, all scheduled cleaning will be lost.

Caution : Before charging the robot, make sure the power switch is turned on, otherwise the robot will not be charged.

Robot can be recharged by:

Plugging into an electrical outlet;
Pressing ( 1§)-) button on remote control – the robot will return to charging dock for auto recharge.

ILIFE A4s Robot Vacuum Cleaner fig 73

Extending battery life:

Before first use, charge the robot overnight. When charging finishes, light at AUTO button will turn off.
Always place the robot on the charging dock that is connected to power.
If the robot will not be used for a long time, fully recharge it and turn off the power switch before storing it in a cool, dry place.

Auto charging

Robot will automatically return to the charging dock when battery runs low.

Start/Pause/Sleep

Sleep mode: the robot is not working, the light at the AUTO button is off and the power switch is on.
Selected mode: the robot is not working, the green light at AUTO button flashes. Cleaning mode: the robot is working, the green light at AUTO button turns solid.

Starting up

Make sure the power switch is on.
Press the button on robot or 8 button on remote control to start cleaning.

Note: If robot is in sleep mode, press button to recover it from sleep mode. Press button again to start the cleaning cycle.

Pause

Press button on robot or 8 button on remote control to change from Clean mode to selected mode.

Note: When robot is paused, press I “”.’° I button to resume the cleaning cycle.

Sleep

Change from selected mode to sleep mode:

Press and hold I “”.’° I button on robot for 3 seconds.
Robot automatically enters sleep mode if no command is received after 45 seconds

Schedule

Point the remote control at robot and press CLEAN button to recover robot from sleep mode. You will hear a beep.
Adjust the “clock” on remote control to display local time.
- Press CLOCK and set time with direction buttons.
- Press CLOCK again to save the setting.
Note : When scheduling a cleaning cycle, keep the remote control close to robot for better signal reception.
Point the remote control at robot, and set PLAN time to start cleaning.
After setting the time, press PLAN button on remote control to save the schedule. Successful scheduling will be confirmed by a “beep” sound.
Note:
- Do not place charging dock on carpet.
- Make sure the robot is turned on after scheduled cleaning is set.
How to cancel the schedule?
- To cancel a schedule, turn off the power switch off on the robot.
- Restart the robot

Successful time and schedule settings are confirmed by a beep sound. If there is no sound confirmation, it means the settings are not saved.

Cleaning mode

Auto cleaning

In Auto cleaning mode, robot automatically cleans the areas that it can reach.

Note: Press button on robot or 8 button on remote control to start Auto cleaning.

Spot cleaning

Press Spot button on remote control while robot is working. Robot will clean around a circular route and return to Auto Clean mode after Spot cleaning is finished.
Press Spot button on remote control while robot is in selected mode. Robot will clean around a circular route and return to selected mode after Spot cleaning is finished.

Edge cleaning

To start edge cleaning, put robot near the edge of a wall and press EDGE on remote control.

Note : Edge cleaning will automatically stop when robot cannot detect any edges. To stop edge cleaning manually, press CLEAN button.

Mini-Room mode

Press CLEAN button twice on robot or remote control to switch from Sleep mode to MINI-room mode, which is designed for small space or single room cleaning.

Maintenance

Side brushes

Clean the side brushes when they get dirty. Replace them if they are damaged.
Note : When replacing the side brushes, make sure they are installed according to the “L” and “R” marks on both sides of the brush and the base of the robot.

Dustbin and filter

Follow the steps below to empty and clean the dustbin after each use.

Take out the dustbin and clean dust or debris in the suction opening.
Clean filter after 15-30 days of use. Replace it no more than 6 months of use.
Do not reinstall the filter and primary filter when they are still wet.
Replace dustbin and filters (including filter and primary filter) if needed.

Cliff sensors and auto charging pins.

Gently clean the sensor lens and charging pins with a soft dry cloth.

Front-wheel

Make sure the front wheel is clean and can rotate freely to avoid lowered cleaning performance:

Pull the wheel up and out vertically and clean it. Also check if the gasket is worn.
Make sure the gasket is properly installed after cleaning the front wheel.

ILIFE A4s Robot Vacuum Cleaner fig 10

Product Specifications

ILIFE A4s Robot Vacuum Cleaner fig
11

Remark : The storage temperature of this product is between -20°C and 60°C. The clock or schedule setting is confirmed with a beep sound. The setting is unsuccessful if there is no sound confirmation.