HANDY 11204 Paint Sprayer Instruction Manual
- June 6, 2024
- Handy
Table of Contents
HANDY 11204 Paint Sprayer Instruction Manual
Product description
Paint like the pros! The great advantage of spray guns is that you can work with them quickly over a large area. Thanks to the adjustable paint laying, material saving, yet even and beautifully painted surface can be achieved without missing spots here and there. You can choose from 3 spray settings on the nozzle of the device, so it’s guaranteed to find what you need. The vertical spray pattern is ideal for painting various metal surfaces, car bodies, wood and wall surfaces, but horizontal and circular paint spraying is also available. The latter, with its concentrated paint spraying, is intended for painting hard to reach areas and corners. Also suitable for painting wall surfaces, furniture, door and window frames.The specially designed suction wand also allows you to perform downward painting processes with a pre-tilted sprayer. It can be ideal for applying primers, water-based and solvent-based topcoats, glazes and varnishes to various surfaces. Safe and comfortable to use thanks to the nonslip handle. The hanger allows, for example: space-saving storage on the walls of garages and workshops. We recommend the use of goggles, mask and gloves during use!
- Convenient to use, design without paint tube
- High-capacity, scaled paint tank (with one tank for painting up to 7 m²)
- Continuous, long duration work
- Easy to refill
- Material – and time saving
- ON / OFF switch
- Infinitely adjustable toner volume
- 3 type of settings(vertical, horizontal, circular)
- Paint can be layed evenly
- No need to pump to produce pressure
- Suitable for painting most surfaces
- Easy to clean
- Viscosity measuring cup and nozzle cleaning needle included
- Practical hanging hook for storage
| Input Voltage | AC 220 – 240 V, ~ 50/60 Hz |
|---|---|
| Power | 500 W – 16 A |
| Speed | 32000 rpm |
| Noise level | ~ 90 dB |
| Vibration level | 6.5 m/s² |
| Tank capacity | 800 ml |
| Max. flow rate | 650 ml / minute |
| Maxumum paint viscosity | 40 DIN / sec (with accessory) |
| Recommended use | Residental use – metal, wood, wall surfaces |
| Paint capacity | Depends on the paint aprox 7 m² with one refill |
| Paint compatibility | Primers, water based paints, solvent paints, varnishes, |
| Spray settings | Vertical, horizontal, circular |
| Nozzle diameter | Ø 2.5 mm |
| Operating temperature | 10 – 35 °C |
| Size | 250 x 112 x 275 mm |
| Material | Plastic |
| Color | Orange |
| --- | --- |
| Weight | ~ 955 g (empty) |
| Cable length | 120 cm |
| Cable type | H05VV-F 2 x 0.75 mm² |
| Protection | IP20 |
| Accessories | Viscosity measuring cup |
Introduction
Familiarize yourself with the product and its controls before use. Please read
the operating instructions below carefully and operate the tool according to.
Improper use may result in an accident involving personal
injury! The manufacturer and distributor shall not be liable for any damage
resulting from improper use! The device is intended for residential use!
Please keep this instruction manual for future reference, or enclose this
documentation when lending the tool.
Structure
- ON / OFF switch
- Fan / ventillation grille
- Non-slip handle
- Toner tank with removable top
- Infinitely adjustable control knob 6. Adjustable paint setting
- Hanger hook
SAFETY INSTRUCTIONS
Failure to follow the instructions below could result in an accident involving
serious personal injury!
Before use, make sure that the safety conditions allow the device to be used.
Personal safety
USE OF PROTECTIVE EQUIPMENT IS MANDATORY!
We recommend wearing to avoid personal injury:
- hearing protection
- safety goggles
- safety gloves
- non slip shoes
The noise level during operation may exceed 90 dB (A)! The vibration level of
the device during use is 6.5 m/s².
Please keep these conditions in mind during continuous, prolonged use.
Only carry out painting work in a well-lit, clean work area! Do not use the device near explosive substances or flammable liquids, gases or dusts! Operation of electrical equipment can cause sparks, which can be extremely dangerous in such conditions. Wear a mask for the entire duration of painting, as inhalation of paint mist and solvent vapors is harmful to health. The device should only be used in a well-ventilated room. When using the tool, ensure the physical safety of those around you. (Especially for children) Do not use the device if you are under the influence of a mind altering substance (alcohol, medicine, drugs). Using the device requires total concentration! To avoid accidental start-up, make sure that the power switch (1) of the appliance is in the “OFF” position before connecting the mains plug! Do not use the device if you experience abnormal operation! Do not use the appliance if you cannot switch it off with the safety switch. A készüléket gyermekektől elzárva kell tartani! Danger of suffocation! Please keep the packaging of the appliance out of the reach of children as it may lead to suffocation The appliance must not be used by children or by persons who have not read the operating instructions. When using the appliance, do not smoke in the vicinity of the appliance or use an open flame!
Risk of electric shock
Never operate the appliance with wet, wet hands! Touching the device, including the power plug and cable, with wet hands is strictly prohibited! The device must only be connected to AC power with the correct voltage. Only connect the appliance to a mains socket that is safe to operate or has been installed by a specialist in accordance with IEC 60364-1. Do not point the device directly at electrical equipment, as dust or liquid may get inside it and damage it. In this situation, there is a risk of short circuit and electric shock. Do not use the appliance near a bathtub, shower, swimming pool or sink containing water!
Before each use, make sure that the appliance and the mains cable and connectors are intact! Do not use the device if you have previously dropped or struck it and it is visibly damaged! Only undamaged devices may be operated! If you experience any damage, do not use the appliance, contact a specialist workshop! During use, pay attention to the integrity of the mains cable, avoid edges or objects that may damage the surface of the cable. Do not use plugged- in extension cords or splitters, as they are a source of danger during operation. Use only splash-proof extension cords with a cross-section of at least 2 x 0.75 mm2. When using the tool outdoors, use only extension cords designed for outdoor use. Always unplug the appliance when not in use. Maintenance work must only be carried out with the mains plug disconnected.
Do not fill the tank with detergent! Use the device only above 0 °C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected to the mains! The device must be protected from environmental factors (IP20). Do not use the device in rain or in humid environments. Moisture entering the device increases the risk of electric shock and may damage the device. Do not carry the appliance by the cord, pull the mains plug by the cord, do not hang the appliance by the mains cord, as this may cause damage.
Material use
Flammable, explosive or corrosive liquids (eg. petrol, alcohol…) must not be filled into the tank and used for spraying! Do not load material with unknown hazards (safety data sheet).
Only spray material below the viscosity limit can be filled into the tank of the device. Do not overfill the tank! Measure the viscosity of the material to be sprayed with the measuring funnel supplied with the tool. Measure at 20 °C! Grasp the bottom of the measuring funnel, fill the measuring cup with the material to be sprayed, and then measure how long it takes to flow into a container. The measured time is called DIN second. Only material that flows out of the DIN measuring funnel in a maximum of 40 seconds is compatible with the device. If the material flows out more slowly, the material is too dense, the device cannot spray and blow out the paint (it may damage the device’s motor, clogging). In such cases, check the diluent that is compatible with the material you want to blow out.
Spraying procedure
Clean, degrease and let the surface to dry before spraying to maximize paint coverage Before switching on, adjust the spray pattern by turning the scroll wheel (6) on the front of the machine clockwise. You can choose from 3 modes: horizontal, vertical and circular concentrated spraying.
After turning on the spray gun, use the dial on the trigger to set the radius you want to use The spray radius is set correctly if no paint droplets form and the paint spray is fine and even. Never start and finish painting the area above the surface to be treated. Guide the gun in a straight line at a steady speed while painting. Be aware of the drying time of the applied material before applying a second, transverse layer to the surface. The special suction system allows you to spray downwards as well. Do not tilt the tool more than 45° upwards, as this may impede the continuous supply of material or cause spray material to enter the tool motor.
Maintenance
The appliance must be cleaned after each use. The longevity of the tool can only be guaranteed if it is professionally cleaned at all times: The cleaning process should only be performed outdoors! Wear safety goggles when cleaning! To clean the machine, remove any remaining toner from the tank, and then add a little thinner. Use a brush to loosen the paint adhering to the tank wall and gently move the liquid in the tank in a circular motion. Pour the resulting contaminated diluent into a container and dispose of it properly. If all the toner residue is gone from the toner container, pour a little thinner and spray it on a safe surface. Please keep in mind the environmental regulations and considerations! Chemicals that are harmful to the environment must not enter the ground, groundwater or water.
By removing the nozzle on the front of the device (6), the spray pattern can be removed, so it is also recommended to clean. When cleaning the appliance, make sure that no sand or other dirt gets into the appliance. To prevent internal rusting of the machine, place a small amount of sewing machine oil in the container and spray with the tool. Never immerse the appliance in liquid! Use a slightly damp cloth to clean the outside of the machine. If you experience any malfunction, contact a service center for assistance! It is strictly forbidden to disassemble or modify the device or to switch off the safety devices!
Destruction
Any defective device is considered electronic waste! Do not dispose of in household waste! Make sure it is recycled professionally and in an environmentally conscious way. Contact your local waste disposal company for more information.