HIKVISION MCC206W Nameplate Camera User Manual
- June 6, 2024
- Hikvision
Table of Contents
Nameplate Camera
User Manual
Please scan the below QR codes to get the initiatives on the use of video products, safety instructions, and communication matrix.
| |
---|---|---
http://enpinfodata.hikvision.com/
analysisQR/showQR/9508c0f4
Initiatives
| http://enpinfodata.hikvision.com/
analysisQR/showQR/1e225414Safety
Instructions|
http://enpinfodata.hikvision.com/
analysisQR/showQR/afc56624
Communication Matrix
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or other reasons. Please find
the latest version of this Manual on the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
Trademarks
and other Hikvision trademarks and logos are the properties of Hikvision in
various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE, AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL
OPERATIONS, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER-ATTACKS,
HACKER ATTACKS, VIRUS INFECTIONS, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the RE Directive 2014/53/EU, the EMC Directive
2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Product Introduction
Nameplate camera (hereinafter referred to as “device”) is a wearable intelligent digital nameplate with audio and video recording functions. It offers two types: with screen or without a screen. The device with a screen adopts the electronic ink screen that enables flexible settings of digital nameplate information.
Note
The device without a screen has no screen. The actual device prevails.
| Button | Description | Indicator | Description |
|---|---|---|---|
| On/Off button | • When the device is off, hold it until the power indicator |
changes to red, and the device starts up.
• When the device is on, hold it until the power indicator is off, and the
device shuts down.
• When the device is on, press it to start recording, and the power indicator
will be flashing green (slowly). Then press it again to stop recording, and
the power indicator will be solid green.| Power indicator| • Flashing red
(fast): Device exception (low battery, storage exception, storage full, etc.).
• Flashing red (slowly): The device is being charged.
• Solid red: The device is fully charged.
• Flashing green (slowly): The device is recording.
• Solid green: The device is on standby.
Wi-Fi button| When the device is on, hold it to enable the Wi-Fi AP. Then
press it again to disable the Wi-Fi AP.| Wi-Fi indicator| • Flashing blue
(slowly): The Wi-Fi AP is on, and the mobile terminal is connected.
• Flashing blue (fast): The Wi-Fi AP is on, but the mobile terminal is not
connected.
Device Wearing
**Danger**
The device adopts a magnetic design. DO NOT use the device if you had surgery
before (for example, installed metal or pacemaker in the body).
The device supports wear with a magnet or pin. When wearing light clothing,
you can put the device on your clothing and fix it with a magnetic plate. When
wearing thick clothing, you can use the pin on the backplate to clip the
device on your clothing and use the magnetic plate to fix the device.
Keep your clothing flat when wearing the device to avoid affecting the
recording effect.
Device Operation via Mini AI Assistant
Add Device
You can scan the below QR codes to get and install the Mini AI Assistant application, and then add a device to set.
|
---|---
https://www.me-app.net/ktbq
Android
|
https://www.me-app.net/P85H
iOS
Steps
-
When the device is on, hold the Wi-Fi button to enable the Wi-Fi AP.
-
Enable the WLAN of the mobile terminal, find the device Wi-Fi AP on the available list, and enter the password to connect.
Note
• The device Wi-Fi AP naming method: miniAI-serial No.
• The initial password of device Wi-Fi AP is “abcd1234”. Please change the password via the Mini AI Assistant (see the Mini AI Assistant for details).
• If the mobile terminal is not connected to the Wi-Fi AP after 3 minutes, the Wi-Fi AP will automatically turn off. If you want to connect to the Wi-Fi AP, you can hold the Wi-Fi button again to enable the Wi-Fi AP. -
Open the Mini AI Assistant. The connected device will display on the device list, and its status will be “Online”.
What to do next
You can select the connected device to view, operate, and set. See the Mini AI
Assistant for details.
Set Digital Nameplate
For the device with screen, you can set the nameplate information displayed on the screen.
Steps
-
Tap on the upper right corner of the APP live view page and tapNameplate Template Settings.
-
Select Nameplate Template and tap OK.
-
Set the two-line text content.
Note
1 to 14 characters allowed. -
Tap Confirm.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>