TECHSMARTER TSB7100 Wireless Power Bank User Manual
- June 6, 2024
- TECHSMARTER
Table of Contents
User Manual
Model: TSB7100
wireless power bank
In the box
Wireless Charging Area
www.techsmarterusa.com
One Year Warranty:: Parts and Labor. Please email customer support to claim
warranty
Customer Support:
Support@techsmarterusa.com
Specifications:
Capacity: 8000mAh
Micro B Input: 5V/2A, 9V/2A
Type-C Input: 5V/2.5A, 9V/2A
Transmission Distance: <6mm| USB Output: 5V/3A, 9V/2A, 12V/1.5A
Wireless Output: 5V/1A, 9V/1.12A
Charging Efficiency: =75%
Product size: 101×67.5x22mm
---|---
How to Use
Use of switches
Press the switch once to turn on the product, the battery indicator will
light up. Then it is in the standby state and other devices can be charged. In
the power on state, press the switch twice continuously, or press and hold the
power button for 5 seconds to turn off the power. Tips: In standby state,
if you do not perform other operations, it will automatically shut down after
about 20 seconds. If you need to use it again, please press the switch again.
Wireless Charging
Please put the single-row suction cup and mobile phone’s camera face up, as
shown in the figure
For wireless charging, to charge the device more efficiently, align the
wireless charging area of the product with the wireless charging receiving
area of the device. For most mainstream models, this product ensures that the
camera is not blocked during use.
When the product is out of power or low battery, then you need to charge the product. You can use the standard USB charging cable with Micro USB connector to connect this product, and plug the USB A into a 5V2A charging device such as a car charger, household appliances, etc. to charge the product.
- Insert the USB charging cable USBA end into Output.
- Plug the other end of the cable into a terminal such as mobile phone.
- Press the switch button and the power is discharged to charge the terminal such as a mobile phone.
Warning
When your wireless power bank works improperly
- Make sure there is no any clutters on the wireless power bank.
- When the wireless power bank is over-heating, take your mobile device away from your wireless power bank, and the power bank will stop charging automatically when overheating. Please try charging again when the wireless power bank cooling down.
Remarks
It’s normal that this charger and your smartphone will be hot under operating
conditions, and it may be more hotter when charging and using at the same time
(such as playing music)
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.