TECHSMARTER TSB4250 MagBoost Portable Charger 5K Ring User Manual
- June 6, 2024
- TECHSMARTER
Table of Contents
TECHSMARTER TSB4250 MagBoost Portable Charger 5K Ring
**INSTRUCTIONS
**
- 360° finger ring
- Power LED indicator
- LED indicator for wireless charging
- Power button
- Type-C Input s output
Product Specifications
Battery type : II-polymer Capacity: S000mAh/18.SWh Type-C input 6 output: PD18W [5V/3A,9V/2A,12V/1.5A) Wireless output: 15W Total output: 5V/3A [MaXJ
Wireless Charging
Snap the iPhone 12 on the MagBoost Portable Charger and then press the
power button to activate wireless charging.
Charging by cable
Using the charging cable to connect your device with the Type-c output, the
power bank will start to charge your device automatically, the white LED
indicator shows the remaining power
Recharge the power bank
To recharge your power bank, it is recommended to use at least an 18W USB-C PD
wall charger. Use the USB-C cable including connecting one end to the 18W
USB-C PD wall charger and the other end to the USB-C input port on the
MagBoost portable charger. The portable charger will automatically start
recharging and the LED indicators will start blinking.
TurboGuard
- High Voltage Protection
- Input & Output Current Regulation
- Input & Output Short-Circuit Protection
- Device Overcharge Protection
- Battery Discharge Protection
- Output Temperature Control
One Year Warranty
Please email [email protected] to start
the warranty process.
warnings
- De not expose the power bank to excess humidity liquids. It should be stored in a cool, dry place when not in use.
- Do not damage or puncture the casing of the power bank. This may cause over-heating, fire or an explosion.
- Do not expose the power bank to sources of heat Including radiators, stoves, or fires. □o not expose to ambient temperatures above 40°c, such as in a car on hot day, or in direct sunlight. Failure to do so may cause over-heating, fire, or explosion.
- Do not use in a strong electrostatic or electromagnetic environment Including near microwaves as this may shorten the device’s life.
- If the power bank emits an odour. excessive heat or becomes disclosed or distorted, please discontinue use Immediately.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.