TECHSMARTER TSB4270 10000mAh Magnetic Wireless Power Bank Instruction Manual
- June 5, 2024
- TECHSMARTER
Table of Contents
MagBoost Portable Charger 10K Kickstand
Model Number: TSB4270
Product description
- Power switch
- Power indicator
- USB output
- Type-C Input/Output
- Wireless fast charging
- Mobile phone positioning magnet
- Wireless charging indicator
- Kickstand
Specifications
Size : 109.0*69.0’17.7mm
Weight: 190g
Capacity: 10000nnAh 38.5Wh
Battery: Polymer battery Suitable ambient temperature: 0°C-40°C
Output 1 : Type-C: 5V-3.0A/9V-2.2A/12V-1.5A
Output 2 : USB : 4.5V-5.0A/5V-4.5A/9V-2.0A/12V-1.5A
Output 3 : Wireless fast charging: 5W/7.5W/10W/15W
Input : Type-C: 5V-3.0 A/9V-2.0A
Instructions
- Press the power switch to turn on the wireless charger after snapping on the portable charger to your iPhone.
- The portable charger is only compatible with magnetic cases. There will not be any magnetic hold if you are using a normal case.
Matters needing attention
-
Do not disassemble the product at will, otherwise, the warranty will be invalid.
-
Do not use this product in high-temperature and humid environments.
Keep away from fire and water. -
When using this product, do not place metal objects (such as keys, coins, batteries, or jewelry) on it, otherwise, it will cause abnormal charging or scalding.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/N technician for help. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.